other
Products
6ES7517-3UP00-0AB0 CPU 1517TF-3 PN/DP Technology CPU
6ES7517-3UP00-0AB0 CPU 1517TF-3 PN/DP Technology CPU
6ES7517-3UP00-0AB0 CPU 1517TF-3 PN/DP Technology CPU

Siemens 6ES7517-3UP00-0AB0 CPU 1517TF-3 PN/DP Technology CPU

EMAIL SALES
Siemens official data reviewed
6ES7517-3UP00-0AB0 — CPU 1517TF-3 PN/DP Technology CPU

A technology CPU with 3 MB program memory, 8 MB data memory, 2 ns bit performance and three differentiated communication interfaces.

CPU 1517TF technology controllerHigh-speed motion and automation processingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyCPU 1517TF technology controller
Exact model6ES7517-3UP00-0AB0
Documented roleHigh-speed motion and automation processing
Interface focusTwo-port IRT network, separate Ethernet path and PROFIBUS interface
CPU designation1517TF-3 PN/DP
Hardware function state11
Product ConditionConfirm in quotation
Selection basisTechnology functions plus three-interface topology
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7517-3UP00-0AB0
  • Goods Stock:

    1
  • Part Number:

    6ES7517-3UP00-0AB0
  • Description:

    A technology CPU with 3 MB program memory, 8 MB data memory, 2 ns bit performance and three differentiated communication interfaces.
6ES7517-3UP00-0AB0 configuration inquiry

Get a precise quote for 6ES7517-3UP00-0AB0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7517-3UP00-0AB0 official identification

A technology CPU with 3 MB program memory, 8 MB data memory, 2 ns bit performance and three differentiated communication interfaces.

Ordering control6ES7517-3UP00-0AB0
Engineering roleHigh-speed motion and automation processing
Primary checkReconcile motion resources, network ownership and program capacity.
Release evidenceTechnology-object inventory, compiled project, bus map and thermal survey

Engineering and installation checks

  • The official data sheet documents 3 MB program memory, 8 MB data memory and 2 ns bit processing.
  • The CPU combines a two-port IRT interface, a second Ethernet interface and a third PROFIBUS interface.
  • Manufacturer verification basis: Siemens official data sheet for 6ES7517-3UP00-0AB0.
Official product data

6ES7517-3UP00-0AB0 key specifications

Order number 6ES7517-3UP00-0AB0
CPU designation 1517TF-3 PN/DP
Hardware function state 11
Firmware version V3.1
Program memory 3 MB
Data memory 8 MB
Bit performance 2 ns
Interface 1 IRT, 2-port switch
Interface 2 Ethernet
Interface 3 PROFIBUS
Memory card Required
Supply 24 V DC
Permissible range 19.2–28.8 V DC
Rated / maximum current 1.55 A / 1.9 A
Dimensions 175 × 147 × 129 mm
Weight Approx. 1929 g

Source: Siemens official data sheet for 6ES7517-3UP00-0AB0.

Pre-order check 01

Installation environment

Prepare 6ES7517-3UP00-0AB0 from documented physical, electrical and project conditions before work begins.

  • Reserve the documented 175 × 147 × 129 mm envelope and cable access.
  • Include 1.9 A maximum demand in the 24 V supply calculation.
  • Separate IRT, Ethernet and PROFIBUS cables in the cutover sheet.
  • Inventory all configured technology objects before project migration.
Keep the completed 6ES7517-3UP00-0AB0 installation record with the receiving and commissioning evidence.
Pre-order check 02

Compatibility confirmation

Approve 6ES7517-3UP00-0AB0 only when every listed selection boundary agrees with the installed system.

Motion configuration
Technology objects and axis resources reconciled
Program footprint
Compiled code fits the 3 MB limit with approved reserve
Runtime data
8 MB capacity checked against the actual project
Three-interface map
Every device assigned to one documented communication path
Physical baseline
Function state 11 and firmware V3.1 verified
Final selection: Use the published V3.1, memory, interface, dimensional and current data only for 6ES7517-3UP00-0AB0 hardware function state 11.
Recommended model families

More Siemens models

Siemens verified models 016ES7654-7HC00-0XA06ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Use this group when reconcile motion resources, network ownership and program capacity.

Siemens verified models 026ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Compare each candidate against technology functions plus three-interface topology.

Siemens verified models 036ES7515-2AN03-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Keep two-port irt network, separate ethernet path and profibus interface as its own decision.

Siemens verified models 046ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Release only with technology-object inventory, compiled project, bus map and thermal survey.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DC562DO526DO572

The high-speed motion and automation processing requirement stays traceable to the approved project.

Tiffany verified models 02PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Do not extend data beyond this boundary: Use the published V3.1, memory, interface, dimensional and current data only for 6ES7517-3UP00-0AB0 hardware function state 11.

Tiffany verified models 03ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Catalog checkpoint: The official data sheet documents 3 MB program memory, 8 MB data memory and 2 ns bit processing.

Tiffany verified models 0420F11RC015JA0NNNNN6ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Configuration checkpoint: The CPU combines a two-port IRT interface, a second Ethernet interface and a third PROFIBUS interface.

Tiffany verified models 056ES7416-3FS07-0AB06ES7654-7HB00-0XA0AI563

Use installed evidence to close the remaining site-specific checks for 6ES7517-3UP00-0AB0.

Tiffany verified models 06AO568CD522CI541-DP

Confirm quantity and destination only after the technical record is complete.

Tiffany verified models 07CI542-DPCI592-CS31CM5640-2ETH

Inspect received labels and connections before the item reaches the cabinet.

Tiffany verified models 08CM582-DPCM588-CNCM589-PNIO

Close commissioning with the test evidence assigned to 6ES7517-3UP00-0AB0.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6ES7517-3UP00-0AB0 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Exact identityEnter 6ES7517-3UP00-0AB0 without shortening or character substitution.
2Installed contextReconcile motion resources, network ownership and program capacity.
3Technical recordTechnology-object inventory, compiled project, bus map and thermal survey
4Connection planTwo-port IRT network, separate Ethernet path and PROFIBUS interface
5Acceptance boundaryUse the published V3.1, memory, interface, dimensional and current data only for 6ES7517-3UP00-0AB0 hardware function state 11.
6Official sourceSiemens official data sheet for 6ES7517-3UP00-0AB0

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Model-specific support for evidence review, compatibility decisions and controlled quotation of 6ES7517-3UP00-0AB0.

Support scope

Identity reviewCompare the submitted label with 6ES7517-3UP00-0AB0.
Technical boundaryReconcile motion resources, network ownership and program capacity.
Site evidenceTechnology-object inventory, compiled project, bus map and thermal survey
Quotation handoffProvide quantity, destination and required date in the same request.

6ES7517-3UP00-0AB0 FAQ

What must be inventoried for a technology-CPU replacement?

List every axis, cam, measuring input, output cam, probe and related parameter set used by the compiled project, including ownership and acceptance tests.

How do the three interfaces avoid role confusion?

Name each path by its documented capability, physical port, subnet or bus address and connected-device list; never label all three simply as network.

What is the correct physical-fit check for this CPU?

Use 175 × 147 × 129 mm as the device envelope, then add front connector, cable bend, ventilation and service-clearance requirements from the cabinet survey.

Why should the supply calculation use 1.9 A as well as 1.55 A?

The official data distinguishes rated and maximum current. The cabinet review must accommodate the higher documented demand while evaluating normal loading separately.

How is the 2 ns figure separated from motion accuracy?

It is a CPU processing characteristic; final position accuracy also depends on the project, drive loops, mechanics, sensors and commissioned technology settings.

Which evidence supports firmware V3.1 acceptance?

Record the received firmware, confirm project support and keep the successful compile and download record with the hardware function state 11 check.

How should the two-port IRT switch be migrated?

Label port one and port two individually, preserve the planned line or ring order, and verify device names and real-time communication after reconnection.

What belongs in a PROFIBUS recovery package?

Keep the master configuration, slave articles, addresses, GSD files, termination locations and a diagnostic baseline from the running system.

How is the 1929 g mass used in cabinet planning?

Include the approximate device weight with adjacent hardware and cable forces when checking rail support, vibration exposure and service handling.

What closes a synchronized-motion acceptance test?

The site approver must confirm homing, direction, coordinated profiles, registration, interlocks, network diagnostics and safe stop behavior under the defined test sequence.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
CPU 1517TF technology controller application review

6ES7517-3UP00-0AB0 Applications

Use cases are framed around the documented role of 6ES7517-3UP00-0AB0; final suitability remains project-controlled.

Application contexts

01 · Synchronized motion cellsValidate axis timing and cam relationships through a controlled dry run.
02 · Fast registration processesCapture registration error and correction behavior at production speed.
03 · Hybrid Ethernet and fieldbus machinesKeep legacy bus devices isolated from Ethernet role assumptions.
04 · Complex packaging controlCoordinate sequence logic and technology functions from one measured project baseline.

Why choose Nordwel

Identity disciplineThe inquiry keeps 6ES7517-3UP00-0AB0 intact through quotation and receiving.
Evidence separationCatalog facts stay separate from site measurements and approvals.
Focused handoffOpen checks are assigned before cabinet work or energization.
Dedicated coordinationTiffany Guan consolidates the technical and delivery records.
Selection boundary: retain 6ES7517-3UP00-0AB0 exactly and close every stated engineering check before release.
Need a documented review for 6ES7517-3UP00-0AB0?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp