other
Products
ABB PM582-ETH
ABB PM582-ETH
ABB PM582-ETH

ABB PM582-ETH AC500 Processor Module

EMAIL SALES
ABB official data verified
PM582-ETH — Legacy processor module

512 kB program memory in ABB AC500 V2 documentation. Confirm PM582-ETH rather than PM582 and retain the installed hardware/firmware record.

AC500 V2Legacy processor module24 V DC systemPM582-ETH
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially verified product profile
Product familyAC500 V2
Exact modelPM582-ETH
Module typeLegacy processor module
Electrical profile24 V DC system
Verified featureEthernet-equipped PM582 variant
Selection boundaryConfirm complete ABB revision
Interface / order detailLegacy AC500 CPU; verify terminal base and firmware
Engineering applicationLegacy process control
  • Brand:

    ABB
  • Item NO.:

    PM582-ETH
  • Goods Stock:

    1
  • Part Number:

    PM582-ETH
  • Description:

    Legacy processor module for AC500 V2
PM582-ETH configuration inquiry

Get a precise quote for PM582-ETH

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

PM582-ETH official identification

ABB identifies PM582-ETH as a Legacy processor module in the AC500 V2 family. 512 kB program memory in ABB AC500 V2 documentation.

Complete modelPM582-ETH
Documented platformAC500 V2
Verified functionEthernet-equipped PM582 variant
Interface or ordering factLegacy AC500 CPU; verify terminal base and firmware

Engineering and installation checks

  • Confirm PM582-ETH rather than PM582 and retain the installed hardware/firmware record.
  • Confirm the installed terminal base or terminal blocks, field wiring, firmware and hardware index before replacement.
  • Manufacturer verification basis: ABB AC500 V2 CPU hardware manual 2CDC125017M0202.
Official product data

PM582-ETH key specifications

Product familyAC500 V2
Module typeProcessor module
Program memory512 kB
Network interfaceEthernet
Model statusLegacy AC500 CPU

Source: ABB AC500 V2 CPU hardware manual 2CDC125017M0202.

Pre-order check 01

Installation environment

Capture the installed AC500 V2 hardware and project state before removing the processor.

  • De-energize the controller and record the installed hardware index.
  • Verify the terminal base, power supply and local I/O arrangement.
  • Back up the approved application and communication settings before replacement.
  • Commission with the documented AC500 V2 firmware and engineering environment.
Retain the application backup, firmware record and network configuration with the commissioning report.
Pre-order check 02

Compatibility confirmation

Match the legacy CPU to the installed base, project, firmware and communication arrangement.

CPU identity
PM582-ETH, including the ETH suffix
Program capacity
512 kB
Installed platform
AC500 V2
Project environment
Existing application, firmware and Ethernet settings
Replacement check
Match terminal base, I/O set and hardware index
Final selection: confirm every row against the complete model, installed assembly and approved project documentation.
Recommended model families

More ABB models

ABB VERIFIED MODELS 01ABB DSTA002B / 3BSE018317R1ABB 3BHE037864R0104 UFC911 B104ABB RB4C-355/170 3AXD50000006934

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 02ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 03ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 04ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

TIFFANY VERIFIED MODELS 01GE DS200TCQAG1BFDSchneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 02Schneider BMENOC0301GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 03SST SST-PB3-SLCVibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 04VIPA 315-2AG12 / CPU315SB DPMWestinghouse 5X00241G02Westinghouse 5X00058G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 05Westinghouse 5X00226G01Bently Nevada 200152-XX-XX-XX MOD 323357-10-03-10Bently Nevada 86691-02150-0400-15-05

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 06Bently Nevada 330171-00-12-05-01-05Bently Nevada 330171-00-33-50-01-05Bently Nevada 3500/50E

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 07Bently Nevada 330180-91-00Bently Nevada 330180-51-CNBently Nevada 128276-01E

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 08Bently Nevada 330780-90-CNBently Nevada 330104-00-07-05-02-00Bently Nevada 3500/92 136180-01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel product page. Confirm the complete model before ordering.CHECK WITH SALES

PM582-ETH Order Guide

Use the complete ABB model and the installed hardware record for engineering review.
1Exact identityPM582-ETH must be retained without shortening.
2PlatformAC500 V2 / Legacy processor module
3Electrical check24 V DC system
4Documented featureEthernet-equipped PM582 variant
5Connection checkLegacy AC500 CPU; verify terminal base and firmware
6Official sourceABB AC500 V2 CPU hardware manual 2CDC125017M0202

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
XP POWER / POWER SUPPLYF7A4K6G2 / A1A0100275

Power-supply reference for legacy equipment support.

Specialist brand
BENTLY NEVADA / TACHOMETER MODULE3500/50E

Tachometer-module reference for machinery monitoring.

Tiffany-verified target
BENTLY NEVADA / PROXIMITY SENSOR330180-91-00

Proximity-sensor reference for installed monitoring systems.

Tiffany-verified target
BENTLY NEVADA / EXPANSION MODULE128276-01E

Expansion-module reference for system configuration review.

Tiffany-verified target
ABB / ANALOG INPUTRAI02J

Analog-input reference for control-system replacement review.

Tiffany-verified target
GE / ANALOG I/ODS200TCQAG1BFD

Analog I/O card reference for installed-system support.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete ABB code and installed nameplate.
Compatibility reviewCheck platform, connection hardware, power, firmware and application context.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

PM582-ETH FAQ

For PM582-ETH, how should engineers identify PM582-ETH before approving a replacement?

Match the complete ABB type designation, installed hardware index, terminal arrangement and project documentation. Do not approve a replacement from appearance or a shortened family number.

When reviewing PM582-ETH, which official electrical value controls the initial wiring review for PM582-ETH?

The documented supply or output profile is 24 V DC system. Confirm the actual cabinet supply, protective devices and field wiring against the ABB manual before energizing.

Before commissioning PM582-ETH, what compatibility evidence is needed for PM582-ETH in an existing AC500 installation?

Verify the CPU or I/O family, terminal base or terminal block, device index, firmware, engineering project and every connected communication or I/O module.

For PM582-ETH, can PM582-ETH be installed without checking separately ordered connection hardware?

No. Confirm the ABB-specified terminal base or terminal blocks and ensure the installed connector set matches this exact module.

When reviewing PM582-ETH, what commissioning record should be retained for PM582-ETH?

Record the full nameplate, hardware index, firmware where applicable, wiring checks, configured addresses, diagnostics and functional-test results.

Before commissioning PM582-ETH, does the family description alone prove that PM582-ETH fits the application?

No. Family data explains the platform, but the exact model, revision, wiring and environmental requirements control selection.

For PM582-ETH, which diagnostic checks are appropriate after installing PM582-ETH?

Check supply and status LEDs, controller diagnostics, configured channel states, network status where applicable and the intended field-device response before handover.

When reviewing PM582-ETH, what must be reviewed before using PM582-ETH as a maintenance spare?

Compare the complete order code, lifecycle status, installed accessories, software level, field wiring and approved machine or safety documentation.

Before commissioning PM582-ETH, how should environmental suitability be confirmed for PM582-ETH?

Use the ABB hardware manual for mounting orientation, temperature, humidity, altitude, enclosure and derating limits; do not infer XC performance for a standard module.

For PM582-ETH, what information should accompany a Nordwel quotation request for PM582-ETH?

Send the full model, quantity, destination, a clear nameplate photo and the installed CPU/I/O or safety-system context so Tiffany can perform a configuration-aware check.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AC500 V2 application review

PM582-ETH Applications

Typical inquiry contexts based on the documented module function; final suitability depends on the installed system.

Application contexts

01 · Legacy process controlUse PM582-ETH only where the ABB-documented platform, wiring and environmental limits match the project.
02 · Ethernet-connected AC500 systemsUse PM582-ETH only where the ABB-documented platform, wiring and environmental limits match the project.
03 · Controller spare planningUse PM582-ETH only where the ABB-documented platform, wiring and environmental limits match the project.
04 · AC500 V3 migration reviewUse PM582-ETH only where the ABB-documented platform, wiring and environmental limits match the project.

Why choose Nordwel

Exact-model controlKeep the complete ABB designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose drawings, approved parts list or migration study name PM582-ETH. Check first: exact revision, connection hardware, firmware, supply, wiring and environmental requirements.
Need help matching your ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens SIMATIC S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp