other
Products
21500-00-12-10-02 7200 5 mm Proximity Probe
21500-00-12-10-02 7200 5 mm Proximity Probe
21500-00-12-10-02 7200 5 mm Proximity Probe

Bently Nevada 21500-00-12-10-02 7200 5 mm Standard-Mount Proximity Probe

EMAIL SALES
Bently Nevada 7200 datasheet reviewed
21500-00-12-10-02 — 7200 5 mm Standard-Mount Proximity Probe

The Bently Nevada 7200 data sheet identifies 21500 as a 5 mm, 1/4-28 standard-mount probe without armor. Code 12 specifies a 1.2 in case and code 10 a 1.0 m total length.

7200 5 mm system1/4-28 standard mount1.0 m / miniature male coaxial
Sales contactStella
Tel / WhatsApp+8618159889985
Officially reviewed product profile
Product family7200 5 mm Proximity Transducer System
Exact model21500-00-12-10-02
Product type5 mm Standard-Mount Proximity Probe
ManufacturerBently Nevada
Case type5 mm / 1/4-28 / no armor
Overall case length1.2 in
Total length1.0 m (39.4 in)
ConnectorMiniature male coaxial
  • Brand:

    Bently Nevada
  • Item NO.:

    21500-00-12-10-02
  • Goods Stock:

    1
  • Part Number:

    21500-00-12-10-02
  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

    Bently Nevada 7200 5 mm standard-mount proximity probe; confirm complete model, nameplate, installed configuration and manufacturer documentation before ordering.
21500-00-12-10-02 configuration inquiry

Get a precise quote for 21500-00-12-10-02

Email Sales
Sales contactStella
WhatsApp+8618159889985

21500-00-12-10-02 official identification

The Bently Nevada 7200 5 mm and 8 mm data sheet identifies 21500 as a standard-mount 5 mm probe with 1/4-28 thread and no armor. The complete code requires nameplate and system review.

Complete model21500-00-12-10-02
Documented family7200 5 mm Proximity Transducer System
Product type5 mm Standard-Mount Proximity Probe
Official configuration5 mm / standard mount / 1/4-28 / no armor

Engineering and installation checks

  • Retain the complete 21500-00-12-10-02 designation in quotation, receiving and maintenance records.
  • Confirm the probe case, connector and cable routing against the as-found installation.
  • Manufacturer verification basis: Bently Nevada 7200 5 mm and 8 mm Proximity Transducer Systems data sheet.
Official product data

21500-00-12-10-02 key specifications

Probe tip 5 mm
Mounting thread 1/4-28
Overall case length 1.2 in
Total probe length 1.0 m (39.4 in)
Lead armor None
Connector Miniature male coaxial

Source: Bently Nevada 7200 5 mm and 8 mm manufacturer data sheet; confirm current documentation before ordering.

Pre-order check 01

Installation environment

Record the as-found probe position, target, gap, cable route and mounting arrangement before removal.

  • Confirm the 21500 standard 5 mm tip, 1/4-28 case and absence of lead armor.
  • Confirm code groups 00 and 12 against the physical case and nameplate.
  • Confirm code group 10 for 1.0 m total length and group 02 for miniature male coaxial connector.
  • Check local approvals separately; this code alone does not establish certification.
Record target material and perform approved final functional checks.
Pre-order check 02

Compatibility confirmation

Match this probe, extension cable, 7200 Proximitor Sensor and monitoring input as an approved complete chain.

Probe family
7200 5 mm standard mount
Case and thread
1/4-28 / 1.2 in overall case
Total length
1.0 m (39.4 in)
Connector
Miniature male coaxial
System review
Probe + cable + 7200 Proximitor
Final selection: Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.
Recommended model families

More Bently Nevada 7200 Models

Bently Nevada 5 mm probesBently Nevada 21500-00-32-05-02Bently Nevada 21500-00-20-10-02Bently Nevada 21501-00-12-10-02

Same 7200 5 mm family; option groups differ and are not direct substitutes.

Bently Nevada 8 mm probesBently Nevada 21504-00-48-10-02Bently Nevada 21504-000-016-10-02Bently Nevada 21504-000-012-05-02

7200 8 mm probe references; not direct substitutes for the 5 mm target.

Bently Nevada armored and metric probesBently Nevada 21505-00-60-10-02Bently Nevada 22810-00-05-10-02Bently Nevada 22811-00-04-10-02

Distinct 7200 probe case and thread families; verify every configuration.

Bently Nevada 7200 system partsBently Nevada 18745-04Bently Nevada 21747-080-01Bently Nevada 21747-075-01

7200 Proximitor and cable references for chain matching; not replacements.

Cross-brand industrial references

Additional Advantage Models

Cross-brand industrial referencesABB PM861AK01 3BSE018157R1SIEMENS 5WG1140-1AB13Allen-Bradley 1715-A3IO

ABB controller, Siemens installation device and Rockwell I/O base references.

Cross-brand industrial referencesGE IC200MDL940AHoneywell P8000A0007GABB PSM0004 2RCA025059A0001R

GE I/O, Honeywell device and ABB power-module references.

Cross-brand industrial referencesSIEMENS 6AV2123-2DB03-0AX0 KTP4000ALLEN-BRADLEY 1756-PA75R/AGE IC200MDD844F

Siemens HMI, Rockwell power supply and GE I/O references.

Cross-brand industrial referencesHoneywell 2MLR-AC23-CCABB AI835A 3BSE051306R1Allen-Bradley 1492-XIM2024-16R

Honeywell controller, ABB analog input and Rockwell interface references.

Cross-brand industrial referencesSiemens 3TF3001-0XL2GE IC660TSD021LHoneywell D254.DIN.110.US

Siemens switching, GE terminal and Honeywell DIN-device references.

Cross-brand industrial referencesABB TB820V2 3BSE013208R1ALLEN-BRADLEY 1756-PB75R/AGE IC200CHS003J

ABB communication, Rockwell power supply and GE I/O-base references.

Cross-brand industrial referencesABB PM571 / 1SAP130100R0170Allen-Bradley 1794-ASB/BGE 55-501463G002

ABB processor, Rockwell adapter and GE industrial-component references.

Cross-brand industrial referencesABB DA501 1SAP250700R0001Allen-Bradley 1756-OB32 /AGE CRS-10-MB

ABB I/O, Rockwell output and GE industrial-component references.

These cross-brand industrial spare references are not direct substitutes for 21500-00-12-10-02. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.CHECK WITH SALES

21500-00-12-10-02 Order Guide

Retain the full 7200 5 mm probe designation and verify the installed measurement chain before quotation.
1Exact identityUse 21500-00-12-10-02 without shortening its option groups.
2Product family7200 5 mm Proximity Transducer System / 5 mm Standard-Mount Proximity Probe
3Probe type5 mm standard-mount, 1/4-28, without armor
4Suffix reviewConfirm 00 unthreaded, 12 case, 10 total length and 02 connector.
5System matchingVerify the extension cable, 7200 Proximitor and monitor input as one chain.
6Manufacturer sourceBently Nevada 7200 5 mm and 8 mm data sheet; verify revision and nameplate.

Bently Nevada 7200 System References

Probe, cable and Proximitor references for separate compatibility review.

Related models are not direct substitutes.
Confirm the exact part number before ordering.
BENTLY NEVADA / TARGET 5 MM PROBE21500-00-12-10-02

5 mm standard-mount probe with 1.2 in case and 1.0 m total length.

Officially reviewed
BENTLY NEVADA / 8 MM PROBE21504-00-48-10-02

7200 8 mm probe reference; not a direct 5 mm substitute.

Official family reference
BENTLY NEVADA / ARMORED 5 MM PROBE21501-00-12-10-02

7200 5 mm armored-family probe; inspect the full code.

Official system reference
BENTLY NEVADA / PROXIMITOR18745-04

7200 Proximitor Sensor reference; confirm system matching.

Official system reference
BENTLY NEVADA / EXTENSION CABLE21747-080-01

7200 extension-cable reference; verify length and armor.

Official mounting reference
BENTLY NEVADA / CABLE REFERENCE21747-075-01

7200 extension-cable reference; confirm installed fit.

Official accessory reference
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, compatibility review and shipment coordination.

Support scope

Model verificationCompare the complete 7200 probe code and installed nameplate.
Compatibility reviewCheck the 5 mm probe, case, connector, cable, Proximitor and monitor input.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation reviewConfirm the applicable manufacturer data sheet, system drawings and installed nameplate.

21500-00-12-10-02 FAQ

How should engineers identify 21500-00-12-10-02 before an order?

Match the complete designation, installed nameplate, probe case and legacy measurement-chain record.

Which manufacturer family contains this probe?

The Bently Nevada 7200 data sheet identifies 21500 as a 5 mm standard-mount probe.

What probe case and armor apply?

The 21500 family uses a standard 1/4-28 case without lead armor.

Which suffix groups must be reviewed?

Check unthreaded length, 1.2 in case, 1.0 m probe length and miniature male coaxial connector.

What connector is indicated?

Code 02 denotes a miniature male coaxial connector; inspect the mating cable.

Can nearby 7200 models be direct substitutes?

Not automatically. Tip size, case, lead armor, length and connector may differ.

What system-matching rule applies?

Verify the complete 7200 probe, extension cable, Proximitor and monitor-channel configuration.

What installation records should be retained?

Record the as-found gap, target, probe position, cable route and chain nameplates.

What should an inquiry include?

Provide the full model, quantity, destination, nameplate photos and installed chain; Stella coordinates clarification.

Which document confirms the 7200 family?

The Bently Nevada 7200 5 mm/8 mm data sheet identifies the family and option codes; final suitability depends on approved system documents.

Sales contactStella
WhatsApp+8618159889985
BENTLY NEVADA / 7200 5 MM

7200 System Model Directory

Manufacturer 7200 probe-family, Proximitor and extension-cable references.

5 MM PROBE REFERENCES

21500-00-12-10-02Target 5 mm standard-mount probe
21500-00-32-05-027200 5 mm probe with a different case and total length
21500-00-20-10-0221500 5 mm probe code reference
21501-00-12-10-0221501 armored 5 mm probe reference
21504-00-48-10-027200 8 mm standard-mount probe
21504-000-016-10-027200 8 mm probe reference
21504-000-012-05-027200 8 mm probe reference

8 MM AND SYSTEM REFERENCES

21505-00-60-10-027200 armored 8 mm probe
22810-00-05-10-027200 metric-thread 8 mm probe
22811-00-04-10-027200 metric-thread 8 mm probe
18745-047200 Proximitor Sensor
21747-080-017200 extension cable
21747-075-01Extension cable; verify 7200 use
21504-000-032-10-027200 8 mm probe reference

OTHER 7200 PROBE AND CABLE REFERENCES

21504-012-032-10-027200 8 mm probe reference
21505-00-40-10-027200 armored 8 mm probe
18745-047200 Proximitor Sensor
21747-080-017200 extension cable
Match the complete model and the installed probe, cable, Proximitor and monitor chain before ordering.
BENTLY NEVADA / CONNECTIONS

7200 Accessory and Connection Selection

Manufacturer cable and sensor references; mounting and interconnect fit must be checked against the installed system.

PROXIMITOR SENSOR
18745-04

7200 5 mm/8 mm Proximitor Sensor reference.

EXTENSION CABLE
21747-080-01

7200 extension cable; verify the calibrated chain.

EXTENSION CABLE
21747-075-01

7200 extension cable; confirm length and system compatibility.

ARMORED INTERCONNECT
16710-12

Bently Nevada interconnect cable; validate the mating system.

ARMORED INTERCONNECT
84661-55

Bently Nevada interconnection cable; validate route and connector.

PROBE HOUSING
21000-11-05-00-085-03-02

Bently Nevada housing assembly; verify mechanical fit.

PROBE HOUSING
21000-15-10-00-166-03-02

Bently Nevada housing assembly; verify mechanical fit.

PROBE HOUSING
21000-28-05-00-070-01-02

Bently Nevada housing assembly; verify mechanical fit.

PROBE HOUSING
21000-16-05-00-084-04-02

Bently Nevada housing assembly; verify mechanical fit.

Confirm every cable, sensor, interconnect and mounting part against the complete 7200 system and approved manufacturer documentation.
7200 5 mm application review

21500-00-12-10-02 Applications

Non-contact proximity-measurement inquiry contexts; final suitability depends on the complete installed system.

Application contexts

Radial vibration reviewUse only where approved drawings and 7200 5 mm monitoring input specify the matched probe chain.
Axial position reviewCheck target geometry, mounting position, gap and calibrated electronics.
Shaft-position monitoringConfirm the actual monitor input and complete probe, cable and Proximitor configuration.
Configuration-controlled replacementCompare every option group, connector and electrical length with the removed unit.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionConfirm the application against approved system drawings and manufacturer data.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactStella manages pre-order clarification and follow-up.
Best fit: installed systems whose approved documents specify 21500-00-12-10-02. Check first: match probe, extension cable, 7200 Proximitor and monitor input.
Need help matching this Bently Nevada 7200 configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Independent industrial control, I/O, sensing, valve and power references.

PLC PROCESSORABB PM861AK01 3BSE018157R1ABB AC 800M processor reference; confirm hardware revision.
POWER MODULEABB PSM0004 2RCA025059A0001RABB power-system module; verify installed supply arrangement.
ANALOG INPUTABB AI835A 3BSE051306R1ABB S800 I/O analog-input reference; confirm signal type.
PLC PROCESSORABB PM571 / 1SAP130100R0170ABB AC500 processor reference; confirm project firmware.
I/O INTERFACEABB TB820V2 3BSE013208R1ABB S800 I/O interface component; verify installed rack.
I/O MODULEABB DA501 1SAP250700R0001ABB AC500 I/O module reference; confirm channel configuration.
I/O BASEAllen-Bradley 1715-A3IOAllen-Bradley 1715 three-slot I/O base unit.
AC POWER SUPPLYALLEN-BRADLEY 1756-PA75R/AControlLogix AC power-supply reference; verify chassis.
DC POWER SUPPLYALLEN-BRADLEY 1756-PB75R/AControlLogix DC power-supply reference; verify chassis.
INTERFACE MODULEAllen-Bradley 1492-XIM2024-16RAllen-Bradley 1492 interface-module reference.
I/O ADAPTERAllen-Bradley 1794-ASB/BFLEX I/O adapter reference; verify network and revision.
DIGITAL OUTPUTAllen-Bradley 1756-OB32 /AControlLogix digital-output module reference.
OUTPUT MODULEGE IC200MDL940AGE VersaMax output-module reference; confirm output type.
MIXED I/OGE IC200MDD844FGE VersaMax mixed-I/O reference; verify point functions.
CONTROL BOARDGE 323A3347P5GE equipment board; confirm exact host assembly.
TERMINAL ASSEMBLYGE IC660TSD021LGE Genius terminal-assembly reference; verify wiring.
I/O CARRIERGE IC200CHS003JGE VersaMax I/O carrier reference; confirm module fit.
ELECTRONIC BOARDGE 55-501463G002GE electronic-board reference; inspect host nameplate.
CONTROL COMPONENTGE CRS-10-MBGE control-system component; verify the intended function.
MOTOR MANAGEMENTMM300-GEHD2CABCGE Multilin MM300 motor-management relay reference.
KNX COMPONENTSIEMENS 5WG1140-1AB13Siemens building-bus component; confirm network interface.
HMI PANELSIEMENS 6AV2123-2DB03-0AX0 KTP4000Siemens KTP400 Basic operator-panel reference.
CONTACTORSiemens 3TF3001-0XL2Siemens industrial contactor; confirm coil option.
CONTROL MODULEHoneywell P8000A0007GHoneywell control-system module reference; verify system family.
I/O MODULEHoneywell 2MLR-AC23-CCHoneywell I/O module reference; confirm channel type.
DIN COMPONENTHoneywell D254.DIN.110.USHoneywell DIN-mounted component; confirm function.
VALVE CONTROLLERDVC6200 GE54203X072GEmerson Fisher DVC6200 valve-controller family; verify the full part code.
INDUSTRIAL CONTROLICS1000 9603 9865/10-00ICS1000 control reference; confirm manufacturer and function.
PROCESS VALVEGEMU 554 15D137510GEMÜ 554 process-valve reference; verify trim and actuator.
SENSING COMPONENTPANAMETRICS 061088-APanametrics sensing-system component; confirm exact duty.
These cross-brand industrial spare references are not direct substitutes for 21500-00-12-10-02. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp