other
Products
Bently Nevada 24710-080-01-00 Legacy 7200 Series 11 mm Proximity Extension Cable Product Image
Bently Nevada 24710-080-01-00 Legacy 7200 Series 11 mm Proximity Extension Cable Product Image
Bently Nevada 24710-080-01-00 Legacy 7200 Series 11 mm Proximity Extension Cable Product Image

Bently Nevada 24710-080-01-00 Legacy 7200 Series 11 mm Proximity Extension Cable

EMAIL SALES
Bently Nevada official data reviewed
24710-080-01-00 — Legacy 7200 Series 11 mm Proximity Extension Cable

The requested identifier is associated with a legacy Bently Nevada 7200 Series 11 mm proximity-system extension cable. Current official documentation confirms that any migration to the 3300 XL 11 mm system requires replacement of every transducer-system component; verify the exact cable execution from the installed nameplate and manufacturer record.

7200 Series 11 mm Proximity Transducer SystemLegacy extension cableExact-order verification
Sales contactStella
Tel / WhatsApp+8618159889985
Officially reviewed product profile
Product family7200 Series 11 mm Proximity Transducer System
Exact model24710-080-01-00
Product typeLegacy Proximity-System Extension Cable
System generationLegacy 7200 Series
Configuration statusVerify exact suffixes
Official referenceDatasheet 146256
Migration ruleReplace complete system for 3300 XL migration
ManufacturerBently Nevada
  • Brand:

    Bently Nevada
  • Item NO.:

    24710-080-01-00
  • Goods Stock:

    1
  • Part Number:

    24710-080-01-00
  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

    Bently Nevada 24710-080-01-00 legacy 7200 Series 11 mm proximity-system extension cable; confirm exact suffixes from the installed nameplate and manufacturer record.
24710-080-01-00 configuration inquiry

Get a precise quote for 24710-080-01-00

Email Sales
Sales contactStella
WhatsApp+8618159889985

24710-080-01-00 official identification

The requested code is a legacy Bently Nevada proximity-system extension-cable identifier associated with the 7200 Series 11 mm system. The accessible official current datasheet confirms the legacy-system migration boundary but does not decode every 24710 suffix; match the supplied nameplate and original manufacturer record before ordering.

Complete model24710-080-01-00
Documented family7200 Series 11 mm Proximity Transducer System
Verified functionLegacy 7200 Series 11 mm extension-cable function
Interface or ordering factExact cable execution must match the installed legacy system

Engineering and installation checks

  • Keep the complete designation 24710-080-01-00 in quotation, receiving and maintenance records.
  • Confirm the full 24710-080-01-00 marking, installed 7200 Series system, total system length, connector execution and routing before release.
  • Official verification basis: Bently Nevada datasheet 146256 confirms the 7200 Series 11 mm legacy-system migration boundary.
Official product data

24710-080-01-00 identification data

Requested identifier 24710-080-01-00
Product role Legacy proximity-system extension cable
Documented family 7200 Series 11 mm Proximity Transducer System
Exact suffix decoding Confirm from nameplate and manufacturer record
Current migration family 3300 XL 11 mm Proximity Transducer System
Official source Bently Nevada datasheet 146256

Source: Bently Nevada 3300 XL 11 mm Proximity Transducer System datasheet 146256.

Pre-order check 01

Installation environment

Verify the installed legacy system, cable route, connector condition, grounding and environmental requirements before removal or installation.

  • Confirm the full 24710-080-01-00 marking, installed 7200 Series system, total system length, connector execution and routing before release.
  • Record the complete cable marking, both connector ends, route and installed transducer chain before disconnection.
  • Verify the matched probe, Proximitor sensor, total electrical length, cable condition, grounding and monitor input.
  • Restore the approved cable route and complete controlled continuity, shield-integrity and transducer-chain checks.
Retain the as-found configuration and final controlled checks in the maintenance record.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed 7200 Series family, total system length, connector execution, Proximitor sensor and monitor channel.

Requested identifier
24710-080-01-00
Cable execution
Legacy proximity-system extension cable
Documented family
7200 Series 11 mm Proximity Transducer System
Exact suffix decoding
Confirm from nameplate and manufacturer record
Length / connector
7200 Series 11 mm legacy cable; exact options require manufacturer-record confirmation
Final selection: Confirm every row against the complete 24710-080-01-00 marking, installed 7200 Series transducer chain and approved Bently Nevada documentation.
Recommended model families

More Bently Nevada 7200 Series 11 mm Models

Current 3300 XL 11 mm probes330701 — 1/2-20 UNF probe without armor330703 — M14 × 1.5 probe without armor330704 — M14 × 1.5 probe with armor

Confirm the complete reference and installed-system compatibility before ordering.

Additional current probe references330707 — 5/8-18 UNF probe without armor330709 — M16 × 1.5 probe without armor330710 — M16 × 1.5 probe with armor

Confirm the complete reference and installed-system compatibility before ordering.

Current cable, sensor and document references330130 — 3300 XL extension-cable family330780 — 3300 XL 11 mm Proximitor Sensor family146256 — Official 3300 XL 11 mm system datasheet

Confirm the complete reference and installed-system compatibility before ordering.

Additional published brands

Additional Advantage Models

Bently Nevada machinery protection3500/50 133442-01 — Bently Nevada tachometer module330103-00-04-10-02-05 — Bently Nevada 3300 XL proximity probe330180-X1-00 — Bently Nevada 3300 XL Proximitor sensor

Confirm the complete reference and installed-system compatibility before ordering.

GE automation referencesHE693RTD665C — GE RTD input moduleIC200UEM001 IC200UEM001-CF — GE VersaMax Ethernet moduleGE IC693ALG390G — GE analog output module

Confirm the complete reference and installed-system compatibility before ordering.

Honeywell control referencesRM7823A1016 RM7823A — Honeywell burner control relayXL1000C500 — Honeywell building controller51202329-402 — Honeywell control-system component

Confirm the complete reference and installed-system compatibility before ordering.

These cross-brand industrial spare references are not direct substitutes for 24710-080-01-00. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.CHECK WITH SALES

24710-080-01-00 Order Guide

Use the complete Bently Nevada designation, legacy-system record and installed transducer-chain documentation for engineering review.
1Exact identity24710-080-01-00 must be retained without shortening, correcting or changing any suffix.
2Product family7200 Series 11 mm Proximity Transducer System / Legacy Extension Cable
3Primary functionLegacy probe-to-Proximitor extension-cable path; exact execution requires nameplate confirmation
4Cable identification checkConfirm cable marking, length record, connectors, armor or jacket and approval documentation
5Transducer-chain checkConfirm the installed 7200 Series probe, extension cable, Proximitor sensor, total system length and monitor input
6Official sourceBently Nevada datasheet 146256; exact legacy cable options require the original manufacturer record

Official 3300 XL 11 mm Migration References

Current Bently Nevada 3300 XL 11 mm components for migration comparison only; they are not direct substitutes.

Official current-family references for full-system migration review.
Confirm the complete legacy code and installed system before ordering; a 3300 XL migration requires every transducer-system component to be replaced.
BENTLY NEVADA / 3300 XL 11 MM PROBE330704-000-078-10-01-05

M14 × 1.5 armored 1.0 m probe.

OFFICIAL FAMILY REFERENCE
BENTLY NEVADA / 3300 XL 11 MM PROBE330703-000-060-10-01-00

M14 × 1.5 unarmored 1.0 m probe.

OFFICIAL FAMILY REFERENCE
BENTLY NEVADA / 3300 XL 11 MM PROBE330709-000-050-10-12-05

M16 × 1.5 unarmored 1.0 m probe.

OFFICIAL FAMILY REFERENCE
BENTLY NEVADA / 3300 XL 11 MM PROBE330703-000-050-10-12-00

M14 × 1.5 unarmored 1.0 m probe.

OFFICIAL FAMILY REFERENCE
BENTLY NEVADA / 3300 XL 11 MM PROBE330704-000-080-50-12-00

M14 × 1.5 armored 5.0 m probe.

OFFICIAL FAMILY REFERENCE
BENTLY NEVADA / 3300 XL 11 MM PROBE330702-00-10-10-01-00

1/2-20 UNF armored 1.0 m probe.

OFFICIAL FAMILY REFERENCE
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete Bently Nevada code, cable marking and installed legacy-system record.
Compatibility reviewCheck legacy family, total system length, connectors, cable route, Proximitor sensor, monitor input and migration scope.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

24710-080-01-00 FAQ

How should engineers identify 24710-080-01-00 before approving a replacement?

Match 24710-080-01-00, the cable marking, both connector ends and the complete installed transducer-chain record. A family-only match is not sufficient.

Which documented family contains 24710-080-01-00?

The current official datasheet identifies the 7200 Series 11 mm as a legacy transducer system replaced at complete-system level by 3300 XL 11 mm. Confirm the exact 24710 record before release.

What is the first compatibility check for 24710-080-01-00?

Verify the installed 7200 Series generation, required total electrical length and mating connector execution, then compare the complete cable marking.

What installation detail is critical for 24710-080-01-00?

Confirm route, bend protection, connector condition, shield integrity and installed total system length. Keep the as-found record.

Which connection facts must be confirmed for 24710-080-01-00?

Confirm both mating connectors, the matched legacy probe and Proximitor sensor, grounding and monitor input before commissioning.

Can 24710-080-01-00 be substituted by a nearby suffix variant?

No. Nearby cable codes can differ in length, construction, connectors or approvals. Use the exact legacy code and manufacturer record.

What environmental review applies to 24710-080-01-00?

Use only Bently Nevada published limits, then confirm cable exposure, routing, grounding and hazardous-area documentation.

What commissioning evidence should be retained for 24710-080-01-00?

Keep the cable marking, connector and shield checks, installed total-length record, baseline signal and controlled test results.

What should a sourcing request for 24710-080-01-00 include?

Provide 24710-080-01-00, quantity, destination, clear cable and connector photos, installed transducer chain and schedule. Stella can coordinate the review.

What manufacturer-data boundary applies to 24710-080-01-00?

Only values traceable to Bently Nevada official documentation are used. The accessible current document does not decode every 24710 suffix; final suitability requires the original manufacturer record.

Sales contactStella
WhatsApp+8618159889985
BENTLY NEVADA / 7200 & 3300 XL

7200 Legacy and 3300 XL 11 mm System Directory

Legacy identification plus current probe, Proximitor sensor and extension-cable references for migration review.

Current 3300 XL 11 mm Probe References

3307011/2-20 UNF probe without armor
3307021/2-20 UNF probe with armor
330703M14 × 1.5 probe without armor
330704M14 × 1.5 probe with armor
3307075/8-18 UNF probe without armor
3307085/8-18 UNF probe with armor
330709M16 × 1.5 probe without armor

Current Probes, Sensor and Cable References

330710M16 × 1.5 probe with armor
3307053/8-24 UNF reverse-mount probe
330780-X1-053300 XL 11 mm Proximitor Sensor
330130-080-10-053300 XL extension cable; verify full suffix
330130-080-01-053300 XL extension cable; verify full suffix
330130-080-03-053300 XL extension cable; verify full suffix
3307803300 XL 11 mm Proximitor Sensor family

Legacy Identification and Migration References

24710Legacy extension-cable family identifier
7200 Series 11 mmInstalled legacy transducer-system family
3300 XL 11 mmCurrent complete-system migration family
146256Official 3300 XL 11 mm datasheet reference
Exact-match links open published Nordwel pages; reference-only items remain unlinked until a matching page is published.
BENTLY NEVADA / ACCESSORIES

7200 Legacy Documentation and Connection References

Legacy cable, connector, transducer-chain and migration references for configuration review.

LEGACY / MIGRATION REFERENCE
24710-080-01-00

Requested legacy extension-cable identifier

LEGACY / MIGRATION REFERENCE
7200 Series 11 mm

Legacy proximity transducer system

LEGACY / MIGRATION REFERENCE
3300 XL 11 mm

Current full-system migration family

LEGACY / MIGRATION REFERENCE
146256

3300 XL 11 mm system datasheet

LEGACY / MIGRATION REFERENCE
330780

3300 XL 11 mm Proximitor Sensor family

LEGACY / MIGRATION REFERENCE
330130

3300 XL extension-cable family

CONNECTION / CABLE REFERENCE
Cable routing

Protect the coaxial cable from abrasion, crushing and sharp bends

CONNECTION / CABLE REFERENCE
Connector integrity

Verify mating surfaces, cleanliness and mechanical security

CONNECTION / CABLE REFERENCE
System-length record

Retain the approved probe, cable and Proximitor total-length configuration

Confirm the complete legacy cable code, installed system family, total electrical length, connectors, Proximitor sensor and monitor compatibility before quotation.
Legacy 7200 Series 11 mm extension-cable application review

24710-080-01-00 Applications

Inquiry contexts for a legacy proximity-system cable; final suitability depends on the exact marking, installed system and manufacturer documentation.

Application contexts

01 · Legacy 7200 transducer-loop maintenanceUse 24710-080-01-00 only where the exact legacy-system record, complete transducer chain and approved project conditions match.
02 · Complete-system migration reviewUse 24710-080-01-00 only where the exact legacy-system record, complete transducer chain and approved project conditions match.
03 · Cable routing and connector-integrity reviewUse 24710-080-01-00 only where the exact legacy-system record, complete transducer chain and approved project conditions match.
04 · Configuration-controlled legacy cable replacementUse 24710-080-01-00 only where the exact legacy-system record, complete transducer chain and approved project conditions match.

Why choose Nordwel

Exact-model controlKeep the complete cable designation in every quotation and maintenance record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination, cable record and required schedule in one inquiry.
Dedicated contactStella manages model verification, documentation review and quotation follow-up.
Best fit: legacy systems whose approved records specify 24710-080-01-00. Final suitability depends on the complete marking, total system length, connectors, matched transducer chain and manufacturer documentation.
Need help matching this legacy Bently Nevada cable?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected cross-brand industrial spare references from the supplied model lists. These are not direct substitutes for 24710-080-01-00.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
These industrial spare references are not direct substitutes for 24710-080-01-00. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp