Item NO.:
330101-00-24-10-12-0Part Number:
330101-00-24-10-12-05Weight:
0.32kgDimensions:
8.13 × 5.0 × 6.35 cmManufacture Year:
The lastest yearPlace of Origin:
USACertification:
COODescription:
3300 XL 8 mm Proximity Probes
Product Information
|
Model Number: |
330101-00-24-10-12-05 |
|
Description: |
3300 XL 8 mm Proximity Probes |
|
Condition: |
100% Original |
|
manufacturer: |
Bently Nevada |
Sales Manager:
Stella
Send an email:
Contact in Whatsapp:
Installation & Troubleshooting FAQ
Q1: How do I properly install the Bently Nevada 330101-00-24-10-12-05 proximity probe?
A1: Install the Bently Nevada 330101-00-24-10-12-05 probe securely in the machine mounting location and adjust the probe gap according to the specified calibration range. Ensure the probe tip is aligned perpendicular to the conductive target surface for accurate vibration and position monitoring. Avoid excessive bending or pulling of the extension cable during installation.
Q2: Why is the probe not producing a stable output signal?
A2: Check the extension cable and Proximitor sensor connections for loose or damaged terminals. Verify the probe gap is within the recommended linear operating range and ensure the monitored target surface is clean and conductive. Electrical interference, poor grounding, or damaged cables may also cause unstable readings.
Q3: How can I troubleshoot inaccurate vibration measurements?
A3: Confirm that the complete transducer system includes compatible 3300 XL probe, extension cable, and Proximitor sensor components. Inspect the probe mounting bracket for looseness or vibration. Also verify that the machine shaft surface is free from scratches, oil buildup, or excessive runout that could affect measurement accuracy.
Q4: What should I do if the extension cable is damaged or pulled loose?
A4: Inspect the cable for cuts, crushed sections, or loose connectors. The patented CableLoc design provides high pull strength, but excessive mechanical stress may still damage the cable assembly. Replace damaged cables immediately to prevent signal loss or inaccurate machine monitoring.
Q5: Why does the system show intermittent speed or Keyphasor signal faults?
A5: Verify the probe alignment with the Keyphasor target and ensure the target surface passes correctly beneath the probe tip. Check the probe gap and confirm the rotational speed signal wiring is securely connected. Misalignment, incorrect spacing, or contamination on the target surface can cause intermittent triggering.
At Amikon Limited, we provide a wide range of industrial automation products and solutions to support modern manufacturing and process industries worldwide. Our product portfolio includes:
•PLC systems, HMIs, sensors, servo drives, motors, and frequency inverters
•Distributed control systems (DCS), PLC, and CNC solutions
•Industrial panel controllers and touchscreen interfaces
•Human-machine interface (HMI) display panels
•Motion control and industrial drive systems
•Encoders and signal conversion devices
•Reliable industrial power supply solutions
We are dedicated to supplying only genuine and brand-new industrial automation components. Every product undergoes strict verification and testing procedures to ensure stable performance, reliability, and long service life.
With a large and diverse stock of automation parts, we can quickly meet urgent customer demands. Our efficient supply chain helps reduce downtime and keeps your operations running smoothly.
Customer satisfaction is at the center of our business. We focus on understanding each client’s requirements and delivering customized solutions backed by responsive technical and sales support.
We believe in building sustainable partnerships. By collaborating closely with customers and suppliers, we continuously seek better solutions that improve productivity and create long-term value.
With more than 10 years of experience in the industrial automation industry, Amikon Limited has established a strong global supply network covering Europe, the Americas, and Asia. We integrate resources from over 60,000 internationally recognized enterprises across 166 countries.
As a trusted supplier of difficult-to-find and obsolete automation components, we provide one-stop procurement solutions for customers around the world.
· Extensive stock of rare and discontinued industrial automation parts
· Cooperation with over 100 experienced manufacturers and equipment suppliers
· More than 2,000,000 automation parts delivered globally
Amikon Limited is committed to becoming a reliable force behind the advancement of industrial automation. Through efficiency, rapid service, and professional support, we help manufacturers worldwide achieve smarter, safer, and more efficient operations.
|
KJ2002X1-CA1 12P1509X102 |
KJ2002X1-CA1 12P1509X102 VE3004 |
KJ2003X1-BA2 12P2093X102 VE3005 |
KJ2003X1-BB1 12P3439X012 |
|
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X022 VE3006 |
KJ2003X1-BB1 12P3439X032 VE3006 |
|
KJ2003X1-BK1 12P4686X052 |
KJ2201X1-BA1 12P3162X092 SLS1508 VS3202 |
HIEE450964R0001 SA9923A-E |
HIEE451116R0001 FM9925A-E |
|
HIER460302R0001 HIER460302R1 UN0824B-P |
HIET404238R0001 UFB700 A01 |
HIET404828R0001 PPB624 A01 |
HIET404828R0001 PPB624 A01 |
|
HITE303018R1 IDB550A |
HITE303166R1 HITE515100 IDB761A |
HITE303278R1 |
HITR301463R1 UA9810 |
|
81000-199-52-R |
81000-199-53-R |
81000-199-53-R |
81001-450-52-R GU-D08 80173-109-01 |
|
81001-451-62-R GU-D15 80173-110-02 G651885C |
81001-451-83-R GU-D15 80173-110-02 |
81001-956-53-R |
81003-438-51-R |
|
81004-286-53-R GU-G04 GCU04AB-130 80173-111-01-2 |
81007-465-51-R |
3500/50M 286566-02 288062-02 |
3500/53 133388-01 |
|
3500/53 133388-01 |
3500/54M 286566-01 |
3500/60 |
3500/60 133811-01 |
|
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
