Provides large-format touch visualization and operator control. 19-inch TFT touch display, 1280 x 1024 resolution, 12 MB configuration memory and 24 VDC input.
Brand:
SIEMENSItem NO.:
6AV6644-0AC01-2AX0Goods Stock:
1Part Number:
6AV6644-0AC01-2AX0Description:
Provides large-format touch visualization and operator controlProvides large-format touch visualization and operator control. 19-inch TFT touch display, 1280 x 1024 resolution, 12 MB configuration memory and 24 VDC input.
| Product designation | MP 377 19-inch Touch |
|---|---|
| Display | 19-inch TFT touch screen |
| Resolution | 1280 x 1024 pixels |
| Configuration memory | 12 MB |
| Supply | 24 VDC |
| Operating system | Windows CE |
| Exact article number | 6AV6644-0AC01-2AX0 |
Source: Official Siemens MP 377 documentation and conformity record.
Verify the installed conditions before this exact model is removed or energized.
Match every item to the installed configuration.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected published products for regional sourcing and exact-code comparison.
TP 177B PN/DP INOX Operator Panel
Tiffany-verified targetWinCC V7.0 SP3 Asia RC 512 software package
Tiffany-verified targetProvides large-format touch visualization and operator control. Only after connector type, pin assignment, shielding, grounding, damage and route suitability are verified.
Use the official lifecycle context to plan spares, documentation retention and a controlled migration path without assuming interchangeability.
Confirm cabinet temperature, humidity, contamination, ventilation, altitude and any required approval against the official instructions.
Stage identity, fit and configuration checks before shutdown and prepare a labelled rollback plan plus acceptance test.
Treat the complete nameplate as controlling and approve ratings and compatibility only from exact configuration evidence.
Follow the site isolation, lockout and verification procedure before touching installed wiring or hardware.
No. Family-level data explains context, but final approval still requires the complete code and installed configuration.
Confirm the configured hardware entry, address, communication parameters, diagnostics and dependent devices.
Use the complete model in every message and attach the label, quantity, destination and installed-system notes.
Match the complete order code, installed family, interface, mounting and approved project record before purchase.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
