other
Products
6ES7654-7HX00-0XA0 Single AS Component Bundle
6ES7654-7HX00-0XA0 Single AS Component Bundle
6ES7654-7HX00-0XA0 Single AS Component Bundle

Siemens 6ES7654-7HX00-0XA0 Single AS Component Bundle

EMAIL SALES
Siemens official data reviewed
6ES7654-7HX00-0XA0 — Single AS Component Bundle

An active single-system bundle supplied as individually ordered components, explicitly configured without CP443-1, without a power supply and without CP443-5.

Siemens configurable automation-system bundleComponent-level bundle for project-specific system assemblyExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyConfigurable automation-system bundle
Exact model6ES7654-7HX00-0XA0
Delivery formSingle AS / individual components
LifecycleActive product
Ethernet optionCP443-1 excluded from this bundle
Power-supply scopeSeparate system supply required
PROFIBUS optionCP443-5 excluded from this bundle
Verified functionParent code for a project-defined component set
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7654-7HX00-0XA0
  • Goods Stock:

    1
  • Part Number:

    6ES7654-7HX00-0XA0
  • Description:

    An active single-system bundle supplied as individually ordered components, explicitly configured without CP443-1, without a power supply and without CP443-5.
6ES7654-7HX00-0XA0 configuration inquiry

Get a precise quote for 6ES7654-7HX00-0XA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7654-7HX00-0XA0 official identification

The parent code defines a loose-component order option rather than a finished rack. This page turns the published exclusions into a receiving and bill-of-material workflow without inventing an assembled specification.

Quotation structureParent bundle plus approved separate lines
Receiving methodCount and label every loose component
Design authorityFinal project bill of material
Commissioning boundaryCompleted rack after all selected parts are installed

Engineering and installation checks

  • The manufacturer keeps this exact parent article in active lifecycle status.
  • Packaging dimensions and net weight are not supplied in the public record, so logistics values remain blank.
  • The completed rack identity depends on the separately approved line items assembled for the project.
Official product data

6ES7654-7HX00-0XA0 key specifications

Article number 6ES7654-7HX00-0XA0
Bundle form Single AS; individual components
CP443-1 Not included
Power supply Not included
CP443-5 Not included
Lifecycle Active product
Packaging dimensions Not available
Net weight Not available

Source: Siemens SiePortal product record for 6ES7654-7HX00-0XA0.

Pre-order check 01

Installation environment

Installation planning begins with the project bill of material because this order option omits key communication and power components.

  • Build an itemized receiving list because the order option is delivered as individual components.
  • Select the rack power supply from the approved load calculation; none is included in this bundle.
  • Define Ethernet communication separately because CP443-1 is explicitly excluded.
  • Resolve any additional fieldbus requirement without assuming CP443-5 is part of the delivery.
Do not release cabinet assembly until every excluded item has an approved separate article number.
Pre-order check 02

Compatibility confirmation

Compatibility is a bill-of-material exercise: confirm what the bundle supplies, then document each separately selected communication and power component.

Component schedule
Every expected line has an approved article and quantity
Rack definition
Slot assignment is complete before material release
Power decision
Load calculation points to a separately approved supply
Ethernet decision
Required network path has its own selected hardware
Fieldbus decision
Additional communication need is resolved by project engineering
Final selection: The official product record identifies the bundle and its three exclusions but does not publish packaging dimensions or net weight. Do not infer the final assembled configuration.
Recommended model families

More Siemens models

Siemens verified models 016ES7553-1AA00-0AB06ES7505-0RB00-0AB06ED1052-1MD08-0BA2

For 6ES7654-7HX00-0XA0, review spare-storage condition before installation.

Siemens verified models 026ED1052-1FB08-0BA26ED1052-1HB08-0BA26ES7515-2RN03-0AB0

For 6ES7654-7HX00-0XA0, confirm the commissioning test boundary with operations.

Siemens verified models 036ES7518-4JP00-0AB06ES7521-1FH00-0AA06ES7521-7EH00-0AB0

For 6ES7654-7HX00-0XA0, compare the ordered revision with the receiving paperwork.

Siemens verified models 046ES7522-5EH00-0AB06ES7551-1AB00-0AB06ES7552-1AA00-0AB0

For 6ES7654-7HX00-0XA0, record site approvals independently from catalog functionality.

Additional published brands

Additional Advantage Models

Tiffany verified models 01PM5670-2ETHPM571-ETHPM582-ETH

For 6ES7654-7HX00-0XA0, check memory-card presence and retained project data.

Tiffany verified models 02SM560-S-FD-1SM560-S-FD-4DO524

For 6ES7654-7HX00-0XA0, verify that unused connectors remain protected.

Tiffany verified models 03DO562ATV320U75N4BAI523

For 6ES7654-7HX00-0XA0, match the backplane position to the hardware configuration.

Tiffany verified models 04AI531AI562CM577-ETH

For 6ES7654-7HX00-0XA0, confirm the permitted ambient range for the enclosure.

Tiffany verified models 05TU531TU532CI862K01

For 6ES7654-7HX00-0XA0, review redundant-path ownership before disturbing either side.

Tiffany verified models 06TP831DP865TU835

For 6ES7654-7HX00-0XA0, check that the maintenance drawing reflects the current cabinet.

Tiffany verified models 07TU836TU837PM5012-R-ETH

For 6ES7654-7HX00-0XA0, verify interface speed and media at every connected segment.

Tiffany verified models 08PM5052-T-ETHPM5630-2ETHPM5650-2ETH

For 6ES7654-7HX00-0XA0, confirm the exact slot label and rack address.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6ES7654-7HX00-0XA0 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Bundle codeUse 6ES7654-7HX00-0XA0 as the parent identity for the component inquiry.
2Component scheduleList every expected loose item and its planned rack position.
3Design approvalsAttach the signed load and network decisions that govern separate selections.
4Packaging instructionRequire labels that preserve the relationship between each loose item and the parent request.
5Discrepancy routeName the reviewer who resolves shortages, substitutions or unidentified components.
6Receiving methodDefine item-by-item inspection, labeling and discrepancy handling.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Bill-of-material support for an active bundle whose communication and power selections remain project responsibilities.

Support scope

Scope worksheetSeparate included delivery lines from project-supplied hardware and site-held stock.
Kitting mapAssociate packages with installation stages so loose parts remain traceable.
Approval registerKeep each engineering selection linked to its responsible discipline and revision.
Discrepancy controlRoute quantity, label or substitution issues before material reaches assembly.

6ES7654-7HX00-0XA0 FAQ

How should receiving interpret the individual-component delivery form?

Inspect the shipment against an itemized schedule and preserve the parent-code relationship on every package and receiving record.

How is the missing Ethernet selection closed?

Network engineering must define the required architecture and approve a separate article; the bundle code does not supply that decision.

What evidence supports the independent rack-power line?

Use the final load calculation, available input source, redundancy philosophy and rack inventory to approve the selected supply.

When is additional fieldbus hardware added?

Add a separate line only when the approved topology documents that path and assigns its role, location and quantity.

Why does this page not state a total bundle weight?

Siemens marks net weight and packaging dimensions as unavailable for the exact order option. A combined value is therefore not estimated.

How should the quotation preserve system scope?

Use the parent code as a header, place approved component lines beneath it and show which items are project-supplied or already held at site.

What should receiving do with an unlisted loose item?

Quarantine it, record its label and condition, and route it through the named discrepancy reviewer before accepting it into the kit.

Can a nearby 6ES7654 order option define the missing parts?

No. Different option codes can change bundle content. Use only the exact HX00 record and the project-specific bill of material.

What prevents a scope gap from reaching installation?

Require every design decision, separate procurement line and site-supplied item to reach a closed status before releasing the kit.

What is the correct commissioning boundary for the assembled system?

Commission the completed rack as one project configuration after all approved loose items are installed, identified and documented.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens configurable automation-system bundle application review

6ES7654-7HX00-0XA0 Applications

This bundle is useful only when the project team manages excluded hardware and loose-component delivery explicitly.

Application contexts

01 · Project-configured single-system buildUse the order option where engineering deliberately selects the missing power and network components as separate lines.
02 · Component-level cabinet assemblyStage loose parts by rack position and installation sequence so no omitted item is mistaken for a shortage.
03 · Controlled modernization packageCompare the new component list with the installed system while preserving project-specific interface decisions.
04 · Spare-bundle receiving preparationPrepare inspection criteria for every delivered component rather than accepting the bundle as one sealed assembly.

Why choose Nordwel

Exclusion clarityThree omitted hardware groups are stated before quotation, reducing assumptions about bundle scope.
Line-item controlEach loose component can be checked against its intended rack position and project purpose.
Power separationThe site load calculation remains the authority for selecting the separately ordered supply.
Communication choiceNetwork modules are chosen from the approved architecture instead of being presumed in the bundle.
Selection boundary: CP443-1, the power supply and CP443-5 are not included in 6ES7654-7HX00-0XA0.
Need help turning this component bundle into a complete inquiry list?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp