other
Products
CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly
CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly
CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly

Emerson CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly

EMAIL SALES
Emerson official data reviewed
CE4001S2T1B1 — 8-Channel Isolated Discrete Input Assembly

An eight-channel isolated 24 V DC discrete input card supplied with its standard field termination block.

DeltaV M-series Traditional I/OIsolated 24 V DC discrete-state acquisitionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Traditional I/O
Product form8-Channel Isolated Discrete Input Assembly
Primary functionIsolated 24 V DC discrete-state acquisition
Signal directionInput
Channel count8
Field voltage24 V DC
IsolationChannel isolated
  • Brand:

    Emerson
  • Item NO.:

    CE4001S2T1B1
  • Goods Stock:

    1
  • Part Number:

    CE4001S2T1B1
  • Description:

    An eight-channel isolated 24 V DC discrete input card supplied with its standard field termination block.
CE4001S2T1B1 configuration inquiry

Get a precise quote for CE4001S2T1B1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4001S2T1B1 official identification

An eight-channel isolated 24 V DC discrete input card supplied with its standard field termination block.

System roleIsolated 24 V DC discrete-state acquisition
Connection boundaryStandard I/O termination block
Selection focusConfirm isolated-channel requirement and the standard termination-block wiring.
Release evidenceEight-channel point list, isolation check, terminal map and state-change test

Engineering and installation checks

  • undefined
  • Land each 24 V DC input on the documented isolated channel.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4001S2T1B1 key specifications

Signal direction Input
Channel count 8
Field voltage 24 V DC
Isolation Channel isolated
Termination Standard I/O termination block
Assembly form Card with termination block
Series M-series Traditional I/O

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4001S2T1B1.

  • Land each 24 V DC input on the documented isolated channel.
  • Keep the termination block keyed to the corresponding card position.
  • Verify field return paths independently rather than sharing unapproved commons.
  • Exercise every input from the field device to the operator display.
Record the as-found condition and the final eight-channel point list, isolation check, terminal map and state-change test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4001S2T1B1 before purchase approval.

Point requirement
8 discrete inputs
Electrical class
24 V DC
Isolation architecture
Individually isolated channels
Termination hardware
Standard I/O termination block
Carrier family
M-series I/O carrier
Final selection: Use only the values published for CE4001S2T1B1 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson VE3009Emerson VE3011Emerson VE3012

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson VE3051C1Emerson VE3051C2Emerson VE3051C3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson VE3051C4Emerson KJ4002X1-BA1Emerson KJ4002X1-CA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson KJ3002X1-BH1Emerson VE4005S2B2Emerson VE4005S2B3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7521-7EH00-0AB06ES7414-3FM07-0AB06ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4001S2T1B1 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4001S2T1B1
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyKeep the termination block keyed to the corresponding card position.
4Compatibility gate8 discrete inputs
5Commissioning recordEight-channel point list, isolation check, terminal map and state-change test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4001S2T1B1 source record named on this page.
Interface reviewStandard I/O termination block
Receiving checkConfirm isolated-channel requirement and the standard termination-block wiring.
Release packageEight-channel point list, isolation check, terminal map and state-change test

CE4001S2T1B1 FAQ

What receiving evidence is required for the series stated for CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

For this isolated 24 v dc discrete-state acquisition selection, series is M-series Traditional I/O. For isolated alarm contacts, land each 24 V DC input on the documented isolated channel. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

How is isolation architecture separated from site-specific assumptions for CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

Use Individually isolated channels as the controlled isolation architecture value in the DeltaV M-series Traditional I/O review. For independent equipment statuses, keep the termination block keyed to the corresponding card position. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

How should signal direction be written in the purchase record for CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

Signal direction is published as Input for the DeltaV M-series Traditional I/O. For package-unit interlocks, verify field return paths independently rather than sharing unapproved commons. Log the comparison against the controlled parts list before the item enters the cabinet.

What field observation validates isolation for CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

The official CE4001S2T1B1 record gives isolation as Channel isolated for its 8-channel isolated discrete input assembly function. For noisy field-contact collection, exercise every input from the field device to the operator display. Check the mating device, protective hardware and configured function before energization.

What fault could result from misreading series on CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

For this isolated 24 v dc discrete-state acquisition selection, series is M-series Traditional I/O. For isolated alarm contacts, land each 24 V DC input on the documented isolated channel. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

What photograph or measurement proves isolation architecture on received CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

Use Individually isolated channels as the controlled isolation architecture value in the DeltaV M-series Traditional I/O review. For independent equipment statuses, keep the termination block keyed to the corresponding card position. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which signal direction value identifies the reviewed CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly configuration?

Signal direction is published as Input for the DeltaV M-series Traditional I/O. For package-unit interlocks, verify field return paths independently rather than sharing unapproved commons. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

Why does isolation matter when selecting CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

The official CE4001S2T1B1 record gives isolation as Channel isolated for its 8-channel isolated discrete input assembly function. For noisy field-contact collection, exercise every input from the field device to the operator display. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

Which mismatch involving series should stop approval of CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

For this isolated 24 v dc discrete-state acquisition selection, series is M-series Traditional I/O. For isolated alarm contacts, land each 24 V DC input on the documented isolated channel. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What maintenance record preserves the isolation architecture evidence for CE4001S2T1B1 8-Channel Isolated Discrete Input Assembly?

Use Individually isolated channels as the controlled isolation architecture value in the DeltaV M-series Traditional I/O review. For independent equipment statuses, keep the termination block keyed to the corresponding card position. Release is appropriate only when the manufacturer value and the project requirement agree.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Traditional I/O application review

CE4001S2T1B1 Applications

These contexts use the manufacturer-documented function of CE4001S2T1B1; each requires a separate site-fit decision.

Application contexts

01 · Isolated alarm contactsApply the documented isolated 24 v dc discrete-state acquisition only after confirming point requirement as 8 discrete inputs.
02 · Independent equipment statusesApply the documented isolated 24 v dc discrete-state acquisition only after confirming electrical class as 24 V DC.
03 · Package-unit interlocksApply the documented isolated 24 v dc discrete-state acquisition only after confirming isolation architecture as Individually isolated channels.
04 · Noisy field-contact collectionApply the documented isolated 24 v dc discrete-state acquisition only after confirming termination hardware as Standard I/O termination block.

Why choose Nordwel

Traceable identityCE4001S2T1B1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to isolated 24 v dc discrete-state acquisition, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4001S2T1B1, Standard I/O termination block, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp