other
Products
6ES7400-2JA10-0AA1 UR2-H XTR Rack
6ES7400-2JA10-0AA1 UR2-H XTR Rack
6ES7400-2JA10-0AA1 UR2-H XTR Rack

Siemens 6ES7400-2JA10-0AA1 UR2-H XTR Rack

EMAIL SALES
Siemens official data reviewed
6ES7400-2JA10-0AA1 — UR2-H XTR Rack

An 18-slot rack arranged as two independent nine-slot segments, prepared for redundant power-supply configurations and extended-temperature cabinet service.

UR2-H extended-temperature rackSegmented central or distributed mountingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyUR2-H extended-temperature rack
Exact model6ES7400-2JA10-0AA1
Documented roleSegmented central or distributed mounting
Interface focusSeparated communication bus and separated parallel bus
Rack designationUR2-H XTR
UseCentral or distributed rack
Product ConditionConfirm in quotation
Selection basisTwo nine-slot segments with independent bus planning
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7400-2JA10-0AA1
  • Goods Stock:

    1
  • Part Number:

    6ES7400-2JA10-0AA1
  • Description:

    An 18-slot rack arranged as two independent nine-slot segments, prepared for redundant power-supply configurations and extended-temperature cabinet service.
6ES7400-2JA10-0AA1 configuration inquiry

Get a precise quote for 6ES7400-2JA10-0AA1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7400-2JA10-0AA1 official identification

An 18-slot rack arranged as two independent nine-slot segments, prepared for redundant power-supply configurations and extended-temperature cabinet service.

Ordering control6ES7400-2JA10-0AA1
Engineering roleSegmented central or distributed mounting
Primary checkMap every module and power supply to the correct rack segment.
Release evidenceSlot inventory, segment load calculation, cabinet dimensions and grounding record

Engineering and installation checks

  • The official record identifies an extended-temperature UR2-H rack with 18 slots divided into two groups of nine.
  • Each segment provides positions for redundant power supplies, and both documented backplane buses are separated.
  • Manufacturer verification basis: Siemens Industry Mall product record for 6ES7400-2JA10-0AA1.
Official product data

6ES7400-2JA10-0AA1 key specifications

Order number 6ES7400-2JA10-0AA1
Rack designation UR2-H XTR
Use Central or distributed rack
Total slots 18
Segmentation 2 × 9 slots
Redundant supplies Up to 2 × 2
Communication bus Separated
Parallel bus Separated
Operating temperature 0–70 °C
Width 482.5 mm
Height 290 mm
Depth 27.5 mm
Weight Approx. 3000 g
Protection feature Conformal coating

Source: Siemens Industry Mall product record for 6ES7400-2JA10-0AA1.

Pre-order check 01

Installation environment

Prepare 6ES7400-2JA10-0AA1 from documented physical, electrical and project conditions before work begins.

  • Confirm the 482.5 × 290 mm mounting envelope and fixing pattern.
  • Allocate every module to segment one or segment two before rack removal.
  • Calculate power independently for each redundant supply pair.
  • Protect coated surfaces while preserving bonding and grounding points.
Keep the completed 6ES7400-2JA10-0AA1 installation record with the receiving and commissioning evidence.
Pre-order check 02

Compatibility confirmation

Approve 6ES7400-2JA10-0AA1 only when every listed selection boundary agrees with the installed system.

Slot allocation
Two separate nine-position module maps
Supply architecture
Redundant pair assignments documented per segment
Backplane behavior
Communication and parallel buses treated as separated
Cabinet climate
Operating plan remains within 0–70 °C
Mechanical support
Approximate 3 kg rack plus installed module mass considered
Final selection: Use the 18-slot, two-segment construction only for 6ES7400-2JA10-0AA1; redundant power capacity must be verified from the installed supply set.
Recommended model families

More Siemens models

Siemens verified models 016ES7357-4AH01-0AE06ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Use this group when map every module and power supply to the correct rack segment.

Siemens verified models 026ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Compare each candidate against two nine-slot segments with independent bus planning.

Siemens verified models 036ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Keep separated communication bus and separated parallel bus as its own decision.

Siemens verified models 046ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Release only with slot inventory, segment load calculation, cabinet dimensions and grounding record.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DC562DO526DO572

The segmented central or distributed mounting requirement stays traceable to the approved project.

Tiffany verified models 02PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Do not extend data beyond this boundary: Use the 18-slot, two-segment construction only for 6ES7400-2JA10-0AA1; redundant power capacity must be verified from the installed supply set.

Tiffany verified models 03ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Catalog checkpoint: The official record identifies an extended-temperature UR2-H rack with 18 slots divided into two groups of nine.

Tiffany verified models 0420F11RC015JA0NNNNN6ES7414-3FM07-0AB06ES7416-3FS07-0AB0

Configuration checkpoint: Each segment provides positions for redundant power supplies, and both documented backplane buses are separated.

Tiffany verified models 056ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Use installed evidence to close the remaining site-specific checks for 6ES7400-2JA10-0AA1.

Tiffany verified models 06AO568CD522CI541-DP

Confirm quantity and destination only after the technical record is complete.

Tiffany verified models 07CI542-DPCI592-CS31CM5640-2ETH

Inspect received labels and connections before the item reaches the cabinet.

Tiffany verified models 08CM582-DPCM588-CNCM589-PNIO

Close commissioning with the test evidence assigned to 6ES7400-2JA10-0AA1.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6ES7400-2JA10-0AA1 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Exact identityEnter 6ES7400-2JA10-0AA1 without shortening or character substitution.
2Installed contextMap every module and power supply to the correct rack segment.
3Technical recordSlot inventory, segment load calculation, cabinet dimensions and grounding record
4Connection planSeparated communication bus and separated parallel bus
5Acceptance boundaryUse the 18-slot, two-segment construction only for 6ES7400-2JA10-0AA1; redundant power capacity must be verified from the installed supply set.
6Official sourceSiemens Industry Mall product record for 6ES7400-2JA10-0AA1

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Model-specific support for evidence review, compatibility decisions and controlled quotation of 6ES7400-2JA10-0AA1.

Support scope

Identity reviewCompare the submitted label with 6ES7400-2JA10-0AA1.
Technical boundaryMap every module and power supply to the correct rack segment.
Site evidenceSlot inventory, segment load calculation, cabinet dimensions and grounding record
Quotation handoffProvide quantity, destination and required date in the same request.

6ES7400-2JA10-0AA1 FAQ

How should the 18 positions be documented?

Use two numbered nine-slot tables, not one continuous list, and include each installed module, empty position and supply location.

What does bus separation change in the compatibility review?

Treat communication and parallel-bus behavior independently on the two segments; do not assume a signal or resource crosses the internal separation.

How are the possible four redundant supplies represented?

Record the actual supply article in each of the two available positions per segment and attach the load and redundancy calculation for that group.

Which cabinet measurement is critical before ordering?

Confirm the 482.5 mm width, 290 mm height, 27.5 mm rack depth, fixing points and additional front access required by installed modules.

Does conformal coating remove the need for environmental controls?

No. It is a documented product feature, while cabinet contamination, condensation, cooling and maintenance access remain project responsibilities.

How is the 0–70 °C range used correctly?

Compare it with measured temperature at the rack under worst credible cabinet load and keep the site derating or ventilation decision in the project record.

Why is rack mass not the complete support load?

The published approximate 3000 g applies to the rack; add power supplies, modules, connectors and cable forces when checking the mounting structure.

What should be photographed before removing a segmented rack?

Capture full cabinet context, every slot label, both supply groups, bus-related hardware, grounding points and cable routes.

Can an empty slot be ignored in the migration plan?

No. Record it as intentionally empty so later module shifting or undocumented occupation is visible during receiving and commissioning checks.

What proves the rack replacement is ready for service?

Both segment inventories, power-path tests, diagnostics, grounding inspection and communications checks must match the approved acceptance record.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
UR2-H extended-temperature rack application review

6ES7400-2JA10-0AA1 Applications

Use cases are framed around the documented role of 6ES7400-2JA10-0AA1; final suitability remains project-controlled.

Application contexts

01 · Dual-segment controller cabinetsSeparate the two module groups in drawings and acceptance records.
02 · Redundant supply assembliesTest each power path and switchover condition under the site procedure.
03 · Extended-temperature installationsVerify local temperature at the rack rather than using room conditions.
04 · Distributed rack modernizationMigrate one documented segment plan without merging bus assumptions.

Why choose Nordwel

Identity disciplineThe inquiry keeps 6ES7400-2JA10-0AA1 intact through quotation and receiving.
Evidence separationCatalog facts stay separate from site measurements and approvals.
Focused handoffOpen checks are assigned before cabinet work or energization.
Dedicated coordinationTiffany Guan consolidates the technical and delivery records.
Selection boundary: retain 6ES7400-2JA10-0AA1 exactly and close every stated engineering check before release.
Need a documented review for 6ES7400-2JA10-0AA1?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp