other
Products
CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly
CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly
CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly

Emerson CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly

EMAIL SALES
Emerson official data reviewed
CE4031S2T2B6 — Redundant 32-Channel Dry-Contact Input Assembly

A redundant Series 2 Plus discrete input assembly for thirty-two 24 V DC dry-contact channels with redundant standard termination.

DeltaV M-series Series 2 Plus I/ORedundant acquisition of 24 V DC dry contactsExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Series 2 Plus I/O
Product formRedundant 32-Channel Dry-Contact Input Assembly
Primary functionRedundant acquisition of 24 V DC dry contacts
Input channels32
Contact modeDry contact
Nominal voltage24 V DC
ArchitectureRedundant
  • Brand:

    Emerson
  • Item NO.:

    CE4031S2T2B6
  • Goods Stock:

    1
  • Part Number:

    CE4031S2T2B6
  • Description:

    A redundant Series 2 Plus discrete input assembly for thirty-two 24 V DC dry-contact channels with redundant standard termination.
CE4031S2T2B6 configuration inquiry

Get a precise quote for CE4031S2T2B6

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4031S2T2B6 official identification

A redundant Series 2 Plus discrete input assembly for thirty-two 24 V DC dry-contact channels with redundant standard termination.

System roleRedundant acquisition of 24 V DC dry contacts
Connection boundaryRedundant standard I/O termination block
Selection focusVerify both card paths, shared point mapping and the redundant B6 termination assembly.
Release evidencePair identity, path-switchover test, 32-point stimulus record and diagnostic clearance

Engineering and installation checks

  • undefined
  • Label primary and secondary card paths before disturbing the pair.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4031S2T2B6 key specifications

Input channels 32
Contact mode Dry contact
Nominal voltage 24 V DC
Architecture Redundant
Termination Redundant standard I/O block
Electronics Series 2 Plus
Signal class Discrete input

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4031S2T2B6.

  • Label primary and secondary card paths before disturbing the pair.
  • Verify redundant termination hardware and both carrier positions.
  • Stimulate each dry contact while observing health on both paths.
  • Perform the approved failover test without masking active process alarms.
Record the as-found condition and the final pair identity, path-switchover test, 32-point stimulus record and diagnostic clearance
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4031S2T2B6 before purchase approval.

Redundant pair
Two matched input paths
Point quantity
32 shared logical inputs
Field interface
24 V DC dry contacts
Termination
B6 redundant standard block
Diagnostic expectation
Healthy operation and controlled switchover
Final selection: Use only the values published for CE4031S2T2B6 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson CE4001S2T1B1Emerson CE4001S2T2B7Emerson CE4002S1T2B6

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CE4002S1T2B8Emerson CE4003S2B10Emerson CE4003S2B9

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson CE4032S1T2B8Emerson CE4033S2B10Emerson CE4036P2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CS6002Emerson 333UEmerson VE3009

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02PM564-RP-ACATSA3S-0ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0320F11NC104JA0NNNNN20F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4031S2T2B6 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4031S2T2B6
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyVerify redundant termination hardware and both carrier positions.
4Compatibility gateTwo matched input paths
5Commissioning recordPair identity, path-switchover test, 32-point stimulus record and diagnostic clearance
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4031S2T2B6 source record named on this page.
Interface reviewRedundant standard I/O termination block
Receiving checkVerify both card paths, shared point mapping and the redundant B6 termination assembly.
Release packagePair identity, path-switchover test, 32-point stimulus record and diagnostic clearance

CE4031S2T2B6 FAQ

What installation decision is controlled by input channels on CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

Input channels is published as 32 for the DeltaV M-series Series 2 Plus I/O. For critical permissive status, label primary and secondary card paths before disturbing the pair. Use the value as a selection boundary, not as a prediction of site performance.

What commissioning check confirms the documented architecture for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

The official CE4031S2T2B6 record gives architecture as Redundant for its redundant 32-channel dry-contact input assembly function. For redundant trip-contact monitoring, verify redundant termination hardware and both carrier positions. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

At which review gate should CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly signal class be challenged?

For this redundant acquisition of 24 v dc dry contacts selection, signal class is Discrete input. For high-availability equipment feedback, stimulate each dry contact while observing health on both paths. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

Which drawing or schedule should carry the CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly field interface record?

Use 24 V DC dry contacts as the controlled field interface value in the DeltaV M-series Series 2 Plus I/O review. For protected shutdown indications, perform the approved failover test without masking active process alarms. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

Which companion item must agree with input channels for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

Input channels is published as 32 for the DeltaV M-series Series 2 Plus I/O. For critical permissive status, label primary and secondary card paths before disturbing the pair. Log the comparison against the controlled parts list before the item enters the cabinet.

How should a discrepancy in architecture be closed for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

The official CE4031S2T2B6 record gives architecture as Redundant for its redundant 32-channel dry-contact input assembly function. For redundant trip-contact monitoring, verify redundant termination hardware and both carrier positions. Check the mating device, protective hardware and configured function before energization.

What receiving evidence is required for the signal class stated for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

For this redundant acquisition of 24 v dc dry contacts selection, signal class is Discrete input. For high-availability equipment feedback, stimulate each dry contact while observing health on both paths. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

How is field interface separated from site-specific assumptions for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

Use 24 V DC dry contacts as the controlled field interface value in the DeltaV M-series Series 2 Plus I/O review. For protected shutdown indications, perform the approved failover test without masking active process alarms. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

How should input channels be written in the purchase record for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

Input channels is published as 32 for the DeltaV M-series Series 2 Plus I/O. For critical permissive status, label primary and secondary card paths before disturbing the pair. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

What field observation validates architecture for CE4031S2T2B6 Redundant 32-Channel Dry-Contact Input Assembly?

The official CE4031S2T2B6 record gives architecture as Redundant for its redundant 32-channel dry-contact input assembly function. For redundant trip-contact monitoring, verify redundant termination hardware and both carrier positions. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Series 2 Plus I/O application review

CE4031S2T2B6 Applications

These contexts use the manufacturer-documented function of CE4031S2T2B6; each requires a separate site-fit decision.

Application contexts

01 · Critical permissive statusApply the documented redundant acquisition of 24 v dc dry contacts only after confirming redundant pair as Two matched input paths.
02 · Redundant trip-contact monitoringApply the documented redundant acquisition of 24 v dc dry contacts only after confirming point quantity as 32 shared logical inputs.
03 · High-availability equipment feedbackApply the documented redundant acquisition of 24 v dc dry contacts only after confirming field interface as 24 V DC dry contacts.
04 · Protected shutdown indicationsApply the documented redundant acquisition of 24 v dc dry contacts only after confirming termination as B6 redundant standard block.

Why choose Nordwel

Traceable identityCE4031S2T2B6 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to redundant acquisition of 24 v dc dry contacts, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4031S2T2B6, Redundant standard I/O termination block, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp