other
Products
IC200CPU005-CE VersaMax CPU005 Controller
IC200CPU005-CE VersaMax CPU005 Controller
IC200CPU005-CE VersaMax CPU005 Controller

GE IC200CPU005-CE VersaMax CPU005 Controller

EMAIL SALES
GE official data reviewed
IC200CPU005-CE — VersaMax CPU005 Controller

A VersaMax controller with configurable application memory, two serial interfaces and modular I/O support. The complete ordering identity is IC200CPU005-CE.

VersaMax modular controllersController execution with dual serial communicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax modular controllers
Exact modelIC200CPU005-CE
Verified functionController execution with dual serial communication
Interface boundaryOne RS-232 port and one RS-485 port
Base catalog numberIC200CPU005
Selection basisConfirm revision, memory and expansion layout.
  • Brand:

    General Electric
  • Item NO.:

    IC200CPU005-CE
  • Goods Stock:

    1
  • Part Number:

    IC200CPU005-CE
  • Description:

    A VersaMax controller with configurable application memory, two serial interfaces and modular I/O support. The complete ordering identity is IC200CPU005-CE.
IC200CPU005-CE configuration inquiry

Get a precise quote for IC200CPU005-CE

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200CPU005-CE official identification

A VersaMax controller with configurable application memory, two serial interfaces and modular I/O support. The complete ordering identity is IC200CPU005-CE.

Operating scopeController execution with dual serial communication
Mating arrangementOne RS-232 port and one RS-485 port
Host platformVersion 2.34
Field verificationIC200CPU005-CE label, firmware 2.34 record, memory image, port settings, I/O inventory and controlled restart test; exact IC200CPU005-CE identity

Engineering and installation checks

  • The ordering and receiving identity is IC200CPU005-CE.
  • Archive the application, hardware configuration, memory allocation and both serial-port settings.
  • The technical definition follows Emerson VersaMax PLC User’s Manual GFK-1503F.
Official product data

IC200CPU005-CE key specifications

Base catalog number IC200CPU005
Revision CE
Firmware 2.34
Configurable memory 128 kB
Embedded ports RS-232 and RS-485
Program storage System flash and battery-backed RAM
Maximum modules 64
Maximum discrete I/O 2048 inputs and 2048 outputs
Boolean execution 0.8 ms/K typical
Dimensions 106.7 × 128 × 69.1 mm

Source: Emerson VersaMax PLC User’s Manual GFK-1503F.

Pre-order check 01

Installation environment

Prepare the versamax cpu005 controller by recording its installed connections, settings and complete IC200CPU005-CE label.

  • Archive the application, hardware configuration, memory allocation and both serial-port settings.
  • Verify power-supply capacity, grounded DIN rail and the installed expansion topology. Record IC200CPU005-CE on the acceptance sheet.
  • Move the complete program and confirm battery-backed data before controlled startup.
  • Test I/O scanning, serial communications, real-time clock and fault recovery.
Close the work with iC200CPU005-CE label, firmware 2.34 record, memory image, port settings, I/O inventory and controlled restart test; exact IC200CPU005-CE identity.
Pre-order check 02

Compatibility confirmation

Approve IC200CPU005-CE only when the documented function and every listed interface boundary agree with the installed design.

Exact revision
IC200CPU005-CE
Firmware identity
Version 2.34
Memory boundary
128 kB configurable memory
Serial interfaces
RS-232 and RS-485
Expansion system
IC200CPU005-CE
Final selection: Use only the values published for IC200CPU005-CE in Emerson VersaMax PLC User’s Manual GFK-1503F; site suitability remains an engineering decision.
Recommended model families

More GE models

GE verified models 01GE IC086SLN080-AGE IC200ALG230DGE IC200ALG230J

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 02GE IC200ALG240-KEGE IC200ALG264AGE IC200ALG264G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 03GE IC200ALG264LGE IC200ALG265DGE IC200ALG265G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 04GE IC200ALG320FGE IC200ALG322GGE IC200ALG326K

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ES7518-4UP00-0AB0B&R 8BVI0330HWS0.000-1B&R X20IF2181-2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02B&R 8B0C0320HW00.000-1Siemens 6GK1161-6AA02Siemens 6SL3120-1TE15-0AA4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0Siemens 6ES7407-0RA01-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES5305-7LA11B&R 8BVI0220HWD0.000-1B&R X20AP3111

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05B&R X20CSL8100Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Siemens 6ED1052-1MD08-0BA2Siemens 6ES7521-7EH00-0AB0Siemens 6ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB AI563ABB AO568ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200CPU005-CE Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200CPU005-CE
2Configuration captureArchive the application, hardware configuration, memory allocation and both serial-port settings.
3Mechanical fitVerify power-supply capacity, grounded DIN rail and the installed expansion topology. Record IC200CPU005-CE on the acceptance sheet.
4Connection reviewMove the complete program and confirm battery-backed data before controlled startup.
5Commissioning proofIC200CPU005-CE label, firmware 2.34 record, memory image, port settings, I/O inventory and controlled restart test; exact IC200CPU005-CE identity
6Release decisionConfirm IC200CPU005-CE; confirm revision CE, 128 kB memory requirement, serial protocols, expansion layout, power and application backup.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200CPU005-CE.

Support scope

Revision reviewCE is checked against the received unit.
Firmware identity reviewVersion 2.34
Firmware checkpoint2.34
Acceptance packageIC200CPU005-CE label, firmware 2.34 record, memory image, port settings, I/O inventory and controlled restart test; exact IC200CPU005-CE identity

IC200CPU005-CE FAQ

At which review gate should IC200CPU005-CE VersaMax CPU005 Controller program storage be challenged?

For this controller execution with dual serial communication selection, program storage is System flash and battery-backed RAM. For standalone machine controller, archive the application, hardware configuration, memory allocation and both serial-port settings. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

Which drawing or schedule should carry the IC200CPU005-CE VersaMax CPU005 Controller boolean execution record?

Use 0.8 ms/K typical as the controlled boolean execution value in the VersaMax modular controllers review. For serial protocol gateway logic for ic200cpu005-ce, verify power-supply capacity, grounded DIN rail and the installed expansion topology. Record IC200CPU005-CE on the acceptance sheet. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which companion item must agree with firmware identity for IC200CPU005-CE VersaMax CPU005 Controller?

Firmware identity is published as Version 2.34 for the VersaMax modular controllers. For modular i/o control station, move the complete program and confirm battery-backed data before controlled startup. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How should a discrepancy in expansion system be closed for IC200CPU005-CE VersaMax CPU005 Controller?

For IC200CPU005-CE, expansion system as IC200CPU005-CE for its versamax cpu005 controller function. For cpu005-ce migration spare, test I/O scanning, serial communications, real-time clock and fault recovery. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

What receiving evidence is required for the firmware stated for IC200CPU005-CE VersaMax CPU005 Controller?

For this controller execution with dual serial communication selection, firmware is 2.34. For standalone machine controller, archive the application, hardware configuration, memory allocation and both serial-port settings. If the received label and controlled record disagree, hold the item until the exact identity is reconciled.

How is program storage separated from site-specific assumptions for IC200CPU005-CE VersaMax CPU005 Controller?

Use System flash and battery-backed RAM as the controlled program storage value in the VersaMax modular controllers review. For serial protocol gateway logic for ic200cpu005-ce, verify power-supply capacity, grounded DIN rail and the installed expansion topology. Record IC200CPU005-CE on the acceptance sheet. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How should boolean execution be written in the purchase record for IC200CPU005-CE VersaMax CPU005 Controller?

Boolean execution is published as 0.8 ms/K typical for the VersaMax modular controllers. For modular i/o control station, move the complete program and confirm battery-backed data before controlled startup. Use the value as a selection boundary, not as a prediction of site performance.

What field observation validates firmware identity for IC200CPU005-CE VersaMax CPU005 Controller?

For IC200CPU005-CE, firmware identity as Version 2.34 for its versamax cpu005 controller function. For cpu005-ce migration spare, test I/O scanning, serial communications, real-time clock and fault recovery. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

What fault could result from misreading expansion system on IC200CPU005-CE VersaMax CPU005 Controller?

For this controller execution with dual serial communication selection, expansion system is IC200CPU005-CE. For standalone machine controller, archive the application, hardware configuration, memory allocation and both serial-port settings. Trace the value to the published technical record and the as-installed drawing as separate evidence items.

What photograph or measurement proves firmware on received IC200CPU005-CE VersaMax CPU005 Controller?

Use 2.34 as the controlled firmware value in the VersaMax modular controllers review. For serial protocol gateway logic for ic200cpu005-ce, verify power-supply capacity, grounded DIN rail and the installed expansion topology. Record IC200CPU005-CE on the acceptance sheet. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax modular controllers application review

IC200CPU005-CE Applications

These contexts use IC200CPU005-CE for controller execution with dual serial communication, with project-specific connection and commissioning evidence.

Application contexts

01 · Standalone machine controllerApply the documented controller execution with dual serial communication only after confirming exact revision as IC200CPU005-CE.
02 · Serial protocol gateway logic for IC200CPU005-CEApply the documented controller execution with dual serial communication only after confirming firmware identity as Version 2.34.
03 · Modular I/O control stationApply the documented controller execution with dual serial communication only after confirming memory boundary as 128 kB configurable memory.
04 · CPU005-CE migration spareApply the documented controller execution with dual serial communication only after confirming serial interfaces as RS-232 and RS-485.

Why choose Nordwel

Base catalog number traceabilityIC200CPU005-CE is reviewed against IC200CPU005.
Revision controlCE is checked independently.
Memory boundary fit128 kB configurable memory
Coordinated releaseTiffany manages quotation, receiving evidence and commissioning records for IC200CPU005-CE.
Keep ordering identity, system fit and final acceptance as separate decisions for IC200CPU005-CE.
Need Tiffany to verify the IC200CPU005-CE acceptance package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp