other
Products
8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module
8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module
8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module

B&R 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module

EMAIL SALES
B&R official data reviewed
8BVI0330HWS0.000-1 — ACOPOSmulti Wall-Mount Inverter Module

A wall-mounted ACOPOSmulti inverter module with two plug-in slots, functional-safety support and a 24.4 kW continuous-power figure.

ACOPOSmulti single-axis inverter modulesHigh-power servo-axis conversionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerB&R
Documented familyACOPOSmulti single-axis inverter modules
Product formACOPOSmulti Wall-Mount Inverter Module
Primary functionHigh-power servo-axis conversion
MountingWall mounting
Plug-in module slots2
Nominal DC bus750 VDC
Continuous power consumption24.4 kW
  • Brand:

    Others
  • Item NO.:

    8BVI0330HWS0.000-1
  • Goods Stock:

    1
  • Part Number:

    8BVI0330HWS0.000-1
  • Description:

    A wall-mounted ACOPOSmulti inverter module with two plug-in slots, functional-safety support and a 24.4 kW continuous-power figure.
8BVI0330HWS0.000-1 configuration inquiry

Get a precise quote for 8BVI0330HWS0.000-1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

8BVI0330HWS0.000-1 official identification

A wall-mounted ACOPOSmulti inverter module with two plug-in slots, functional-safety support and a 24.4 kW continuous-power figure.

System roleHigh-power servo-axis conversion
Connection boundary750 VDC bus with ACOPOSmulti backplane connections
Selection focusConfirm DC-bus envelope, wall-mount cooling, plug-in modules and motor-current duty.
Release evidenceModel label, DC-bus record, slot inventory and controlled motor-current test

Engineering and installation checks

  • undefined
  • Mount the module only in an approved wall orientation with required cooling space.
  • Manufacturer verification basis: B&R 8BVI0330HWS0.000-1 official product record.
Official product data

8BVI0330HWS0.000-1 key specifications

Mounting Wall mounting
Plug-in module slots 2
Nominal DC bus 750 VDC
Continuous power consumption 24.4 kW
DC bus capacitance 990 µF
24 V input 25 VDC ±1.6%
Maximum auxiliary consumption 25 W plus connected loads
Functional safety Supported
B&R ID code 0xAD78
Maximum motor cable 25 m at 5, 10 or 20 kHz

Source: B&R 8BVI0330HWS0.000-1 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 8BVI0330HWS0.000-1.

  • Mount the module only in an approved wall orientation with required cooling space.
  • Isolate and discharge the DC bus before touching power terminals.
  • Record both plug-in modules and their settings before exchanging the inverter.
  • Verify motor cable length, shielding and holding-brake wiring before enabling torque.
Record the as-found condition and the final model label, dc-bus record, slot inventory and controlled motor-current test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 8BVI0330HWS0.000-1 before purchase approval.

DC-bus platform
ACOPOSmulti, nominal 750 VDC
Mechanical form
Wall-mounted inverter module
Option capacity
Two plug-in module slots
Motor cabling
Maximum 25 m at documented switching frequencies
Safety boundary
Retain the validated functional-safety configuration
Final selection: Use only the values published for 8BVI0330HWS0.000-1 in B&R 8BVI0330HWS0.000-1 official product record; site suitability remains an engineering decision.
Recommended model families

More B&R models

B&R verified models 016ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

B&R verified models 026ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

B&R verified models 036ES7654-7HC00-0XA0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

B&R verified models 04CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02PM564-RP-ACATSA3S-0ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0320F11NC104JA0NNNNN20F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

8BVI0330HWS0.000-1 Order Guide

Use the complete B&R designation and installed hardware record for engineering review.
1Ordering identity8BVI0330HWS0.000-1
2Official evidenceB&R 8BVI0330HWS0.000-1 official product record
3Installation surveyIsolate and discharge the DC bus before touching power terminals.
4Compatibility gateACOPOSmulti, nominal 750 VDC
5Commissioning recordModel label, DC-bus record, slot inventory and controlled motor-current test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 8BVI0330HWS0.000-1 source record named on this page.
Interface review750 VDC bus with ACOPOSmulti backplane connections
Receiving checkConfirm DC-bus envelope, wall-mount cooling, plug-in modules and motor-current duty.
Release packageModel label, DC-bus record, slot inventory and controlled motor-current test

8BVI0330HWS0.000-1 FAQ

What fault could result from misreading nominal dc bus on 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

For this high-power servo-axis conversion selection, nominal dc bus is 750 VDC. For high-power servo axis, mount the module only in an approved wall orientation with required cooling space. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves 24 v input on received 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

Use 25 VDC ±1.6% as the controlled 24 v input value in the ACOPOSmulti single-axis inverter modules review. For coordinated machine drive, isolate and discharge the DC bus before touching power terminals. Release is appropriate only when the manufacturer value and the project requirement agree.

Which b&r id code value identifies the reviewed 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module configuration?

B&R ID code is published as 0xAD78 for the ACOPOSmulti single-axis inverter modules. For regenerative dc-bus system, record both plug-in modules and their settings before exchanging the inverter. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does mechanical form matter when selecting 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

The official 8BVI0330HWS0.000-1 record gives mechanical form as Wall-mounted inverter module for its acoposmulti wall-mount inverter module function. For safety-rated motion cabinet, verify motor cable length, shielding and holding-brake wiring before enabling torque. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving safety boundary should stop approval of 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

For this high-power servo-axis conversion selection, safety boundary is Retain the validated functional-safety configuration. For high-power servo axis, mount the module only in an approved wall orientation with required cooling space. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What maintenance record preserves the nominal dc bus evidence for 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

Use 750 VDC as the controlled nominal dc bus value in the ACOPOSmulti single-axis inverter modules review. For coordinated machine drive, isolate and discharge the DC bus before touching power terminals. Mark the evidence source and revision so future reviewers can reproduce the decision.

How does 24 v input limit a proposed 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module substitute?

24 V input is published as 25 VDC ±1.6% for the ACOPOSmulti single-axis inverter modules. For regenerative dc-bus system, record both plug-in modules and their settings before exchanging the inverter. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How can a technician test 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module without exceeding the stated b&r id code?

The official 8BVI0330HWS0.000-1 record gives b&r id code as 0xAD78 for its acoposmulti wall-mount inverter module function. For safety-rated motion cabinet, verify motor cable length, shielding and holding-brake wiring before enabling torque. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

When can the 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module mechanical form entry be released for quotation?

For this high-power servo-axis conversion selection, mechanical form is Wall-mounted inverter module. For high-power servo axis, mount the module only in an approved wall orientation with required cooling space. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How should engineers verify safety boundary before fitting 8BVI0330HWS0.000-1 ACOPOSmulti Wall-Mount Inverter Module?

Use Retain the validated functional-safety configuration as the controlled safety boundary value in the ACOPOSmulti single-axis inverter modules review. For coordinated machine drive, isolate and discharge the DC bus before touching power terminals. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ACOPOSmulti single-axis inverter modules application review

8BVI0330HWS0.000-1 Applications

These contexts use the manufacturer-documented function of 8BVI0330HWS0.000-1; each requires a separate site-fit decision.

Application contexts

01 · High-power servo axisApply the documented high-power servo-axis conversion only after confirming dc-bus platform as ACOPOSmulti, nominal 750 VDC.
02 · Coordinated machine driveApply the documented high-power servo-axis conversion only after confirming mechanical form as Wall-mounted inverter module.
03 · Regenerative DC-bus systemApply the documented high-power servo-axis conversion only after confirming option capacity as Two plug-in module slots.
04 · Safety-rated motion cabinetApply the documented high-power servo-axis conversion only after confirming motor cabling as Maximum 25 m at documented switching frequencies.

Why choose Nordwel

Traceable identity8BVI0330HWS0.000-1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to high-power servo-axis conversion, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 8BVI0330HWS0.000-1, 750 VDC bus with ACOPOSmulti backplane connections, and the approved site record as three independent checks.
Need help matching this B&R configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp