other
Products
6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module
6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module
6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module

Siemens 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module

EMAIL SALES
Siemens official data reviewed
6ES7157-0AA82-0XA0 — IM157 Y-Link DPV1 Interface Module

An IM157 Y-Link interface module for redundant-system coupling to a lower DP master system with DPV1 support.

Y-Link interface modulesRedundant upper bus to lower DP master-system couplingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familyY-Link interface modules
Product formIM157 Y-Link DPV1 Interface Module
Primary functionRedundant upper bus to lower DP master-system coupling
Interface moduleIM157 Y-Link
Protocol levelDPV1 supported
Upper-system functionRedundant connection
Lower-system functionDP master segment
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7157-0AA82-0XA0
  • Goods Stock:

    1
  • Part Number:

    6ES7157-0AA82-0XA0
  • Description:

    An IM157 Y-Link interface module for redundant-system coupling to a lower DP master system with DPV1 support.
6ES7157-0AA82-0XA0 configuration inquiry

Get a precise quote for 6ES7157-0AA82-0XA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7157-0AA82-0XA0 official identification

An IM157 Y-Link interface module for redundant-system coupling to a lower DP master system with DPV1 support.

System roleRedundant upper bus to lower DP master-system coupling
Connection boundaryRedundant host connection with subordinate PROFIBUS DP segment
Selection focusConfirm redundancy architecture, supported lower-bus devices, GSD revision and diagnostic behavior.
Release evidenceModule code, topology drawing, GSD file and redundancy-changeover test

Engineering and installation checks

  • undefined
  • Document both redundant upper paths and the lower DP segment before disconnection.
  • Manufacturer verification basis: Siemens IM157 Y-Link official manual.
Official product data

6ES7157-0AA82-0XA0 key specifications

Interface module IM157 Y-Link
Protocol level DPV1 supported
Upper-system function Redundant connection
Lower-system function DP master segment
GSD requirement Revision 5 or later for DPV1
Configuration basis Required GSD feature flags
Diagnostics Y-Link-specific behavior
Selection boundary Supported lower devices only

Source: Siemens IM157 Y-Link official manual.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 6ES7157-0AA82-0XA0.

  • Document both redundant upper paths and the lower DP segment before disconnection.
  • Use a GSD revision that supports the required DPV1 functions.
  • Check address allocation and permitted device types on the subordinate bus.
  • Test diagnostic reporting and switchover without disturbing the process.
Record the as-found condition and the final module code, topology drawing, gsd file and redundancy-changeover test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 6ES7157-0AA82-0XA0 before purchase approval.

System architecture
Redundant host with lower DP network
Engineering file
GSD revision 5 or later for DPV1
Subordinate devices
Only Y-Link-supported DP devices
Addressing
Project address map must be retained
Diagnostics
Controller and Y-Link diagnostic handling must match
Final selection: Use only the values published for 6ES7157-0AA82-0XA0 in Siemens IM157 Y-Link official manual; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ES7654-7HC00-0XA06ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0720F11RC015JA0NNNNN6ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6ES7157-0AA82-0XA0 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6ES7157-0AA82-0XA0
2Official evidenceSiemens IM157 Y-Link official manual
3Installation surveyUse a GSD revision that supports the required DPV1 functions.
4Compatibility gateRedundant host with lower DP network
5Commissioning recordModule code, topology drawing, GSD file and redundancy-changeover test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 6ES7157-0AA82-0XA0 source record named on this page.
Interface reviewRedundant host connection with subordinate PROFIBUS DP segment
Receiving checkConfirm redundancy architecture, supported lower-bus devices, GSD revision and diagnostic behavior.
Release packageModule code, topology drawing, GSD file and redundancy-changeover test

6ES7157-0AA82-0XA0 FAQ

How does lower-system function limit a proposed 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module substitute?

Lower-system function is published as DP master segment for the Y-Link interface modules. For redundant remote i/o link, document both redundant upper paths and the lower DP segment before disconnection. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module without exceeding the stated diagnostics?

The official 6ES7157-0AA82-0XA0 record gives diagnostics as Y-Link-specific behavior for its im157 y-link dpv1 interface module function. For dp device integration, use a GSD revision that supports the required DPV1 functions. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module engineering file entry be released for quotation?

For this redundant upper bus to lower dp master-system coupling selection, engineering file is GSD revision 5 or later for DPV1. For legacy bus segmentation, check address allocation and permitted device types on the subordinate bus. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify diagnostics before fitting 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module?

Use Controller and Y-Link diagnostic handling must match as the controlled diagnostics value in the Y-Link interface modules review. For high-availability fieldbus coupling, test diagnostic reporting and switchover without disturbing the process. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by upper-system function on 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module?

Upper-system function is published as Redundant connection for the Y-Link interface modules. For redundant remote i/o link, document both redundant upper paths and the lower DP segment before disconnection. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What commissioning check confirms the documented configuration basis for 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module?

The official 6ES7157-0AA82-0XA0 record gives configuration basis as Required GSD feature flags for its im157 y-link dpv1 interface module function. For dp device integration, use a GSD revision that supports the required DPV1 functions. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

At which review gate should 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module system architecture be challenged?

For this redundant upper bus to lower dp master-system coupling selection, system architecture is Redundant host with lower DP network. For legacy bus segmentation, check address allocation and permitted device types on the subordinate bus. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

Which drawing or schedule should carry the 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module addressing record?

Use Project address map must be retained as the controlled addressing value in the Y-Link interface modules review. For high-availability fieldbus coupling, test diagnostic reporting and switchover without disturbing the process. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which companion item must agree with protocol level for 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module?

Protocol level is published as DPV1 supported for the Y-Link interface modules. For redundant remote i/o link, document both redundant upper paths and the lower DP segment before disconnection. Use the value as a selection boundary, not as a prediction of site performance.

How should a discrepancy in gsd requirement be closed for 6ES7157-0AA82-0XA0 IM157 Y-Link DPV1 Interface Module?

The official 6ES7157-0AA82-0XA0 record gives gsd requirement as Revision 5 or later for DPV1 for its im157 y-link dpv1 interface module function. For dp device integration, use a GSD revision that supports the required DPV1 functions. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Y-Link interface modules application review

6ES7157-0AA82-0XA0 Applications

These contexts use the manufacturer-documented function of 6ES7157-0AA82-0XA0; each requires a separate site-fit decision.

Application contexts

01 · Redundant remote I/O linkApply the documented redundant upper bus to lower dp master-system coupling only after confirming system architecture as Redundant host with lower DP network.
02 · DP device integrationApply the documented redundant upper bus to lower dp master-system coupling only after confirming engineering file as GSD revision 5 or later for DPV1.
03 · Legacy bus segmentationApply the documented redundant upper bus to lower dp master-system coupling only after confirming subordinate devices as Only Y-Link-supported DP devices.
04 · High-availability fieldbus couplingApply the documented redundant upper bus to lower dp master-system coupling only after confirming addressing as Project address map must be retained.

Why choose Nordwel

Traceable identity6ES7157-0AA82-0XA0 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to redundant upper bus to lower dp master-system coupling, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 6ES7157-0AA82-0XA0, Redundant host connection with subordinate PROFIBUS DP segment, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp