other
Products
IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module
IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module
IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module

GE IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module

EMAIL SALES
GE official data reviewed
IC200ALG320F — VersaMax Four-Channel Voltage and Current Analog Output Module

A VersaMax analog output module providing four 12-bit voltage or current command channels. The complete inquiry identity is IC200ALG320F.

VersaMax modular analog I/OFour-channel analog voltage and current command outputExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax modular analog I/O
Exact modelIC200ALG320F
Verified functionFour-channel analog voltage and current command output
Interface boundaryFour 12-bit output channels for voltage or current signals
Base catalog numberIC200ALG320
Selection basisConfirm IC200ALG320F, output range, receiving load and carrier.
  • Brand:

    General Electric
  • Item NO.:

    IC200ALG320F
  • Goods Stock:

    1
  • Part Number:

    IC200ALG320F
  • Description:

    A VersaMax analog output module providing four 12-bit voltage or current command channels. The complete inquiry identity is IC200ALG320F.
IC200ALG320F configuration inquiry

Get a precise quote for IC200ALG320F

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200ALG320F official identification

A VersaMax analog output module providing four 12-bit voltage or current command channels. The complete inquiry identity is IC200ALG320F.

System responsibilityFour-channel analog voltage and current command output
Connection envelopeFour 12-bit output channels for voltage or current signals
Procurement decisionConfirm IC200ALG320F, output range, receiving load and carrier.
Acceptance recordIC200ALG320F label, carrier identity, load inventory, range setup, four-channel zero-span test and default-state test; exact IC200ALG320F identity

Engineering and installation checks

  • The controlling order and receiving identity is IC200ALG320F.
  • Record each output destination, required signal mode and receiving-device impedance.
  • Technical facts are limited to Emerson official VersaMax Modular I/O and Control data sheet; the trailing revision characters are not decoded beyond manufacturer-published evidence.
Official product data

IC200ALG320F key specifications

Base catalog number IC200ALG320
Signal direction Analog output
Channel count 4
Resolution 12 bit
Output types Voltage and current
Module family VersaMax modular I/O
Carrier requirement Compatible VersaMax I/O carrier
Load review Confirm receiving-device range and impedance
Revision identity F character retained

Source: Emerson official VersaMax Modular I/O and Control data sheet.

Pre-order check 01

Installation environment

Prepare the versamax four-channel voltage and current analog output module by recording the installed connections, settings and complete IC200ALG320F label.

  • Record each output destination, required signal mode and receiving-device impedance.
  • Isolate output loads and confirm the external supply before seating the module. Keep IC200ALG320F on the inspection record.
  • Command controlled low, midpoint and high values on every used channel.
  • Test configured output behavior during controller stop or communication loss.
Close the work with iC200ALG320F label, carrier identity, load inventory, range setup, four-channel zero-span test and default-state test; exact IC200ALG320F identity.
Pre-order check 02

Compatibility confirmation

Approve IC200ALG320F only when its documented base function and every listed boundary agree with the installed design.

Base function
IC200ALG320 four-channel analog output
Signal fit
Voltage or current as configured
Conversion
12-bit output resolution
Load boundary
Receiving-device range and impedance must match
Exact identity
IC200ALG320F
Final selection: Use only the values published for IC200ALG320F in Emerson official VersaMax Modular I/O and Control data sheet; site suitability remains an engineering decision.
Recommended model families

Verified Cross-Brand Models

Tiffany verified models 01B&R X20AP3111B&R X20CSL8100Siemens 6ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6ES7553-1AA00-0AB0Siemens 6ED1052-1MD08-0BA2Siemens 6ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7414-3FM07-0AB0Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7654-7HC00-0XA0ABB AI563ABB AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB DO572ABB PM5032-R-ETHABB PM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB PM564-RP-ACYokogawa ATSA3S-0Yokogawa ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0B&R 8BVI0330HWS0.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06B&R X20IF2181-2B&R 8B0C0320HW00.000-1Siemens 6GK1161-6AA02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6SL3120-1TE15-0AA4Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES7407-0RA01-0AA0Siemens 6ES5305-7LA11B&R 8BVI0220HWD0.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200ALG320F Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200ALG320F
2Manufacturer evidenceEmerson official VersaMax Modular I/O and Control data sheet
3Installed-condition captureIsolate output loads and confirm the external supply before seating the module. Keep IC200ALG320F on the inspection record.
4Compatibility gateBase function: IC200ALG320 four-channel analog output
5Commissioning proofIC200ALG320F label, carrier identity, load inventory, range setup, four-channel zero-span test and default-state test; exact IC200ALG320F identity
6Release decisionConfirm IC200ALG320F, output range, receiving load and carrier.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200ALG320F.

Support scope

Signal direction evidenceAnalog output is checked against the received unit.
Signal fit reviewVoltage or current as configured
Channel count checkpoint4
Acceptance packageIC200ALG320F label, carrier identity, load inventory, range setup, four-channel zero-span test and default-state test; exact IC200ALG320F identity

IC200ALG320F FAQ

How does revision identity limit a proposed IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module substitute?

Revision identity is published as F character retained for the VersaMax modular analog I/O. For four-loop valve command, record each output destination, required signal mode and receiving-device impedance. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module without exceeding the stated conversion?

The official IC200ALG320F record gives conversion as 12-bit output resolution for its versamax four-channel voltage and current analog output module function. For drive speed reference for ic200alg320f, isolate output loads and confirm the external supply before seating the module. Keep IC200ALG320F on the inspection record. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module base catalog number entry be released for quotation?

For this four-channel analog voltage and current command output selection, base catalog number is IC200ALG320. For analog setpoint distribution, command controlled low, midpoint and high values on every used channel. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify resolution before fitting IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module?

Use 12 bit as the controlled resolution value in the VersaMax modular analog I/O review. For revision-f output replacement, test configured output behavior during controller stop or communication loss. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by carrier requirement on IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module?

Carrier requirement is published as Compatible VersaMax I/O carrier for the VersaMax modular analog I/O. For four-loop valve command, record each output destination, required signal mode and receiving-device impedance. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What commissioning check confirms the documented base function for IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module?

The official IC200ALG320F record gives base function as IC200ALG320 four-channel analog output for its versamax four-channel voltage and current analog output module function. For drive speed reference for ic200alg320f, isolate output loads and confirm the external supply before seating the module. Keep IC200ALG320F on the inspection record. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

At which review gate should IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module load boundary be challenged?

For this four-channel analog voltage and current command output selection, load boundary is Receiving-device range and impedance must match. For analog setpoint distribution, command controlled low, midpoint and high values on every used channel. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

Which drawing or schedule should carry the IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module signal direction record?

Use Analog output as the controlled signal direction value in the VersaMax modular analog I/O review. For revision-f output replacement, test configured output behavior during controller stop or communication loss. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which companion item must agree with output types for IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module?

Output types is published as Voltage and current for the VersaMax modular analog I/O. For four-loop valve command, record each output destination, required signal mode and receiving-device impedance. Use the value as a selection boundary, not as a prediction of site performance.

How should a discrepancy in load review be closed for IC200ALG320F VersaMax Four-Channel Voltage and Current Analog Output Module?

The official IC200ALG320F record gives load review as Confirm receiving-device range and impedance for its versamax four-channel voltage and current analog output module function. For drive speed reference for ic200alg320f, isolate output loads and confirm the external supply before seating the module. Keep IC200ALG320F on the inspection record. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax modular analog I/O application review

IC200ALG320F Applications

These contexts use IC200ALG320F for four-channel analog voltage and current command output; each requires its own installed-system evidence.

Application contexts

01 · Four-loop valve commandApply the documented four-channel analog voltage and current command output only after confirming base function as IC200ALG320 four-channel analog output.
02 · Drive speed reference for IC200ALG320FApply the documented four-channel analog voltage and current command output only after confirming signal fit as Voltage or current as configured.
03 · Analog setpoint distributionApply the documented four-channel analog voltage and current command output only after confirming conversion as 12-bit output resolution.
04 · Revision-F output replacementApply the documented four-channel analog voltage and current command output only after confirming load boundary as Receiving-device range and impedance must match.

Why choose Nordwel

Base catalog number traceabilityIC200ALG320F is reviewed against IC200ALG320.
Signal direction boundaryAnalog output is checked independently.
Conversion control12-bit output resolution
Coordinated releaseTiffany manages quotation, receiving evidence and ic200alg320f label, carrier identity, load inventory, range setup, four-channel zero-span test and default-state test; exact ic200alg320f identity.
Keep exact identity, interface fit and final acceptance as separate decisions for IC200ALG320F.
Need Tiffany to verify the IC200ALG320F evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp