other
Products
6SL3040-0LA00-0AA1 CU310 DP Control Unit
6SL3040-0LA00-0AA1 CU310 DP Control Unit
6SL3040-0LA00-0AA1 CU310 DP Control Unit

Siemens 6SL3040-0LA00-0AA1 CU310 DP Control Unit

EMAIL SALES
Siemens official data reviewed
6SL3040-0LA00-0AA1 — CU310 DP Control Unit

A CU310 DP control unit with PROFIBUS communications and an X23 interface supporting HTL, TTL and SSI encoders.

S120 CU310 control unitsPROFIBUS-based single-axis drive controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familyS120 CU310 control units
Product formCU310 DP Control Unit
Primary functionPROFIBUS-based single-axis drive control
Control unitCU310 DP
FieldbusPROFIBUS
Encoder connectorX23, 15-pin D-sub
Encoder standardsHTL / TTL / SSI
  • Brand:

    SIEMENS
  • Item NO.:

    6SL3040-0LA00-0AA1
  • Goods Stock:

    1
  • Part Number:

    6SL3040-0LA00-0AA1
  • Description:

    A CU310 DP control unit with PROFIBUS communications and an X23 interface supporting HTL, TTL and SSI encoders.
6SL3040-0LA00-0AA1 configuration inquiry

Get a precise quote for 6SL3040-0LA00-0AA1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6SL3040-0LA00-0AA1 official identification

A CU310 DP control unit with PROFIBUS communications and an X23 interface supporting HTL, TTL and SSI encoders.

System rolePROFIBUS-based single-axis drive control
Connection boundaryPROFIBUS plus X23 encoder interface
Selection focusConfirm PROFIBUS configuration, encoder standard, encoder supply and sensor-temperature input.
Release evidenceControl-unit label, project archive, encoder signal check and drive-ready record

Engineering and installation checks

  • undefined
  • Record PROFIBUS address and project parameters before exchange.
  • Manufacturer verification basis: Siemens S120 control-unit manual.
Official product data

6SL3040-0LA00-0AA1 key specifications

Control unit CU310 DP
Fieldbus PROFIBUS
Encoder connector X23, 15-pin D-sub
Encoder standards HTL / TTL / SSI
Encoder supply 5 V or 24 V
Temperature sensors KTY or PTC supported
Encoder channels Dual-channel functions documented
Drive family S120

Source: Siemens S120 control-unit manual.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 6SL3040-0LA00-0AA1.

  • Record PROFIBUS address and project parameters before exchange.
  • Verify X23 encoder type and supply voltage before connection.
  • Check temperature-sensor wiring separately from encoder channels.
  • Run encoder direction, speed feedback and drive-enable checks at low risk.
Record the as-found condition and the final control-unit label, project archive, encoder signal check and drive-ready record
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 6SL3040-0LA00-0AA1 before purchase approval.

Communications
PROFIBUS
Encoder input
HTL, TTL or SSI at X23
Encoder supply
Selected 5 V or 24 V
Temperature monitoring
KTY or PTC as configured
Drive context
Compatible S120 axis configuration
Final selection: Use only the values published for 6SL3040-0LA00-0AA1 in Siemens S120 control-unit manual; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 0120F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6SL3040-0LA00-0AA1 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6SL3040-0LA00-0AA1
2Official evidenceSiemens S120 control-unit manual
3Installation surveyVerify X23 encoder type and supply voltage before connection.
4Compatibility gatePROFIBUS
5Commissioning recordControl-unit label, project archive, encoder signal check and drive-ready record
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 6SL3040-0LA00-0AA1 source record named on this page.
Interface reviewPROFIBUS plus X23 encoder interface
Receiving checkConfirm PROFIBUS configuration, encoder standard, encoder supply and sensor-temperature input.
Release packageControl-unit label, project archive, encoder signal check and drive-ready record

6SL3040-0LA00-0AA1 FAQ

At which review gate should 6SL3040-0LA00-0AA1 CU310 DP Control Unit encoder supply be challenged?

For this profibus-based single-axis drive control selection, encoder supply is Selected 5 V or 24 V. For single-axis drive control, record PROFIBUS address and project parameters before exchange. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

Which drawing or schedule should carry the 6SL3040-0LA00-0AA1 CU310 DP Control Unit control unit record?

Use CU310 DP as the controlled control unit value in the S120 CU310 control units review. For encoder-based speed loop, verify X23 encoder type and supply voltage before connection. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which companion item must agree with encoder standards for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

Encoder standards is published as HTL / TTL / SSI for the S120 CU310 control units. For profibus machine axis, check temperature-sensor wiring separately from encoder channels. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How should a discrepancy in encoder channels be closed for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

The official 6SL3040-0LA00-0AA1 record gives encoder channels as Dual-channel functions documented for its cu310 dp control unit function. For legacy cu310 replacement, run encoder direction, speed feedback and drive-enable checks at low risk. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

What receiving evidence is required for the encoder input stated for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

For this profibus-based single-axis drive control selection, encoder input is HTL, TTL or SSI at X23. For single-axis drive control, record PROFIBUS address and project parameters before exchange. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How is drive context separated from site-specific assumptions for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

Use Compatible S120 axis configuration as the controlled drive context value in the S120 CU310 control units review. For encoder-based speed loop, verify X23 encoder type and supply voltage before connection. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How should encoder connector be written in the purchase record for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

Encoder connector is published as X23, 15-pin D-sub for the S120 CU310 control units. For profibus machine axis, check temperature-sensor wiring separately from encoder channels. Use the value as a selection boundary, not as a prediction of site performance.

What field observation validates temperature sensors for 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

The official 6SL3040-0LA00-0AA1 record gives temperature sensors as KTY or PTC supported for its cu310 dp control unit function. For legacy cu310 replacement, run encoder direction, speed feedback and drive-enable checks at low risk. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

What fault could result from misreading communications on 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

For this profibus-based single-axis drive control selection, communications is PROFIBUS. For single-axis drive control, record PROFIBUS address and project parameters before exchange. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

What photograph or measurement proves temperature monitoring on received 6SL3040-0LA00-0AA1 CU310 DP Control Unit?

Use KTY or PTC as configured as the controlled temperature monitoring value in the S120 CU310 control units review. For encoder-based speed loop, verify X23 encoder type and supply voltage before connection. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
S120 CU310 control units application review

6SL3040-0LA00-0AA1 Applications

These contexts use the manufacturer-documented function of 6SL3040-0LA00-0AA1; each requires a separate site-fit decision.

Application contexts

01 · Single-axis drive controlApply the documented profibus-based single-axis drive control only after confirming communications as PROFIBUS.
02 · Encoder-based speed loopApply the documented profibus-based single-axis drive control only after confirming encoder input as HTL, TTL or SSI at X23.
03 · PROFIBUS machine axisApply the documented profibus-based single-axis drive control only after confirming encoder supply as Selected 5 V or 24 V.
04 · Legacy CU310 replacementApply the documented profibus-based single-axis drive control only after confirming temperature monitoring as KTY or PTC as configured.

Why choose Nordwel

Traceable identity6SL3040-0LA00-0AA1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to profibus-based single-axis drive control, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 6SL3040-0LA00-0AA1, PROFIBUS plus X23 encoder interface, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp