other
Products
IC200EBI001-P VersaMax Ethernet Network Interface Unit
IC200EBI001-P VersaMax Ethernet Network Interface Unit
IC200EBI001-P VersaMax Ethernet Network Interface Unit

GE IC200EBI001-P VersaMax Ethernet Network Interface Unit

EMAIL SALES
GE official data reviewed
IC200EBI001-P — VersaMax Ethernet Network Interface Unit

A VersaMax Ethernet network interface unit for connecting a remote modular I/O station. The complete ordering identity is IC200EBI001-P.

VersaMax remote I/O interfacesRemote VersaMax I/O station connection over EthernetExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax remote I/O interfaces
Exact modelIC200EBI001-P
Verified functionRemote VersaMax I/O station connection over Ethernet
Interface boundaryEthernet NIU with EGD and Modbus Ethernet support
Base catalog numberIC200EBI001
Selection basisConfirm revision, IP settings and I/O support.
  • Brand:

    General Electric
  • Item NO.:

    IC200EBI001-P
  • Goods Stock:

    1
  • Part Number:

    IC200EBI001-P
  • Description:

    A VersaMax Ethernet network interface unit for connecting a remote modular I/O station. The complete ordering identity is IC200EBI001-P.
IC200EBI001-P configuration inquiry

Get a precise quote for IC200EBI001-P

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200EBI001-P official identification

A VersaMax Ethernet network interface unit for connecting a remote modular I/O station. The complete ordering identity is IC200EBI001-P.

Operating scopeRemote VersaMax I/O station connection over Ethernet
Mating arrangementEthernet NIU with EGD and Modbus Ethernet support
Host platformEGD and Modbus Ethernet
Field verificationcomplete EBI001 label, IP and exchange configuration, module inventory, power budget, I/O scan and network recovery test; exact IC200EBI001-P identity

Engineering and installation checks

  • The ordering and receiving identity is IC200EBI001-P.
  • Export the IP settings, EGD or Modbus data map and complete remote-station inventory.
  • The technical definition follows Emerson official VersaMax Modular I/O and Control data sheet.
Official product data

IC200EBI001-P key specifications

Base catalog number IC200EBI001
Product role Ethernet network interface unit
Station type Remote VersaMax I/O
Ethernet services EGD and Modbus Ethernet
System family VersaMax modular I/O
Configuration boundary Installed I/O inventory and network parameters

Source: Emerson official VersaMax Modular I/O and Control data sheet.

Pre-order check 01

Installation environment

Prepare the versamax ethernet network interface unit by recording its installed connections, settings and complete IC200EBI001-P label.

  • Export the IP settings, EGD or Modbus data map and complete remote-station inventory.
  • Verify the main power supply, grounded DIN rail and adjacent carrier connections.
  • Reconnect Ethernet and field wiring without changing the approved network or I/O addressing.
  • Prove controller communication, I/O scanning, diagnostics and network recovery. Record IC200EBI001-P on the acceptance sheet.
Close the work with complete EBI001 label, IP and exchange configuration, module inventory, power budget, I/O scan and network recovery test; exact IC200EBI001-P identity.
Pre-order check 02

Compatibility confirmation

Approve IC200EBI001-P only when the documented function and every listed interface boundary agree with the installed design.

Base function
IC200EBI001 Ethernet NIU
Protocol support
EGD and Modbus Ethernet
Station role
Remote VersaMax I/O interface
I/O boundary
Every installed module must be supported by the NIU revision
Revision identity
IC200EBI001-P
Final selection: Use only the values published for IC200EBI001-P in Emerson official VersaMax Modular I/O and Control data sheet; site suitability remains an engineering decision.
Recommended model families

More GE models

GE verified models 01GE IC086SLN080-AGE IC200ALG230DGE IC200ALG230J

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 02GE IC200ALG240-KEGE IC200ALG264AGE IC200ALG264G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 03GE IC200ALG264LGE IC200ALG265DGE IC200ALG265G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 04GE IC200ALG320FGE IC200ALG322GGE IC200ALG326K

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ES7157-0AA82-0XA0Siemens 6ES7407-0RA01-0AA0Siemens 6ES5305-7LA11

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02B&R 8BVI0220HWD0.000-1B&R X20AP3111B&R X20CSL8100

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0Siemens 6ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7521-7EH00-0AB0Siemens 6ES7414-3FM07-0AB0Siemens 6ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0ABB AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB AO568ABB CD522ABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CI542-DPABB CI592-CS31ABB CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200EBI001-P Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200EBI001-P
2Configuration captureExport the IP settings, EGD or Modbus data map and complete remote-station inventory.
3Mechanical fitVerify the main power supply, grounded DIN rail and adjacent carrier connections.
4Connection reviewReconnect Ethernet and field wiring without changing the approved network or I/O addressing.
5Commissioning proofcomplete EBI001 label, IP and exchange configuration, module inventory, power budget, I/O scan and network recovery test; exact IC200EBI001-P identity
6Release decisionConfirm IC200EBI001-P; confirm the complete revision, Ethernet services, IP configuration, I/O-module support, power and carrier layout.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200EBI001-P.

Support scope

Product role reviewEthernet network interface unit is checked against the received unit.
Protocol support reviewEGD and Modbus Ethernet
Station type checkpointRemote VersaMax I/O
Acceptance packagecomplete EBI001 label, IP and exchange configuration, module inventory, power budget, I/O scan and network recovery test; exact IC200EBI001-P identity

IC200EBI001-P FAQ

How does product role limit a proposed IC200EBI001-P VersaMax Ethernet Network Interface Unit substitute?

Product role is published as Ethernet network interface unit for the VersaMax remote I/O interfaces. For remote ethernet i/o station, export the IP settings, EGD or Modbus data map and complete remote-station inventory. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test IC200EBI001-P VersaMax Ethernet Network Interface Unit without exceeding the stated system family?

For IC200EBI001-P, system family as VersaMax modular I/O for its versamax ethernet network interface unit function. For egd field i/o node, verify the main power supply, grounded DIN rail and adjacent carrier connections. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the IC200EBI001-P VersaMax Ethernet Network Interface Unit protocol support entry be released for quotation?

For this remote versamax i/o station connection over ethernet selection, protocol support is EGD and Modbus Ethernet. For modbus ethernet i/o island, reconnect Ethernet and field wiring without changing the approved network or I/O addressing. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify revision identity before fitting IC200EBI001-P VersaMax Ethernet Network Interface Unit?

Use IC200EBI001-P as the controlled revision identity value in the VersaMax remote I/O interfaces review. For niu replacement for ic200ebi001-p, prove controller communication, I/O scanning, diagnostics and network recovery. Record IC200EBI001-P on the acceptance sheet. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by station type on IC200EBI001-P VersaMax Ethernet Network Interface Unit?

Station type is published as Remote VersaMax I/O for the VersaMax remote I/O interfaces. For remote ethernet i/o station, export the IP settings, EGD or Modbus data map and complete remote-station inventory. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What commissioning check confirms the documented configuration boundary for IC200EBI001-P VersaMax Ethernet Network Interface Unit?

For IC200EBI001-P, configuration boundary as Installed I/O inventory and network parameters for its versamax ethernet network interface unit function. For egd field i/o node, verify the main power supply, grounded DIN rail and adjacent carrier connections. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

At which review gate should IC200EBI001-P VersaMax Ethernet Network Interface Unit station role be challenged?

For this remote versamax i/o station connection over ethernet selection, station role is Remote VersaMax I/O interface. For modbus ethernet i/o island, reconnect Ethernet and field wiring without changing the approved network or I/O addressing. If the received label and controlled record disagree, hold the item until the exact identity is reconciled.

Which drawing or schedule should carry the IC200EBI001-P VersaMax Ethernet Network Interface Unit base catalog number record?

Use IC200EBI001 as the controlled base catalog number value in the VersaMax remote I/O interfaces review. For niu replacement for ic200ebi001-p, prove controller communication, I/O scanning, diagnostics and network recovery. Record IC200EBI001-P on the acceptance sheet. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which companion item must agree with ethernet services for IC200EBI001-P VersaMax Ethernet Network Interface Unit?

Ethernet services is published as EGD and Modbus Ethernet for the VersaMax remote I/O interfaces. For remote ethernet i/o station, export the IP settings, EGD or Modbus data map and complete remote-station inventory. Use the value as a selection boundary, not as a prediction of site performance.

How should a discrepancy in base function be closed for IC200EBI001-P VersaMax Ethernet Network Interface Unit?

For IC200EBI001-P, base function as IC200EBI001 Ethernet NIU for its versamax ethernet network interface unit function. For egd field i/o node, verify the main power supply, grounded DIN rail and adjacent carrier connections. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax remote I/O interfaces application review

IC200EBI001-P Applications

These contexts use IC200EBI001-P for remote versamax i/o station connection over ethernet, with project-specific connection and commissioning evidence.

Application contexts

01 · Remote Ethernet I/O stationApply the documented remote versamax i/o station connection over ethernet only after confirming base function as IC200EBI001 Ethernet NIU.
02 · EGD field I/O nodeApply the documented remote versamax i/o station connection over ethernet only after confirming protocol support as EGD and Modbus Ethernet.
03 · Modbus Ethernet I/O islandApply the documented remote versamax i/o station connection over ethernet only after confirming station role as Remote VersaMax I/O interface.
04 · NIU replacement for IC200EBI001-PApply the documented remote versamax i/o station connection over ethernet only after confirming i/o boundary as Every installed module must be supported by the NIU revision.

Why choose Nordwel

Base catalog number traceabilityIC200EBI001-P is reviewed against IC200EBI001.
Product role controlEthernet network interface unit is checked independently.
Station role fitRemote VersaMax I/O interface
Coordinated releaseTiffany manages quotation, receiving evidence and commissioning records for IC200EBI001-P.
Keep ordering identity, system fit and final acceptance as separate decisions for IC200EBI001-P.
Need Tiffany to verify the IC200EBI001-P acceptance package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp