Provides large-memory control execution for an RX3i universal-backplane system. 1 GHz processor and 64 MB user memory; complete GL revision retained.
Brand:
General ElectricItem NO.:
IC695CPU320-GLGoods Stock:
1Part Number:
IC695CPU320-GLDescription:
Provides large-memory control execution for an RX3i universal-backplane systemProvides large-memory control execution for an RX3i universal-backplane system. 1 GHz processor and 64 MB user memory; complete GL revision retained.
| Processor | 1 GHz |
|---|---|
| User memory | 64 MB |
| Backplane context | RX3i universal backplane |
| Power draw at 3.3 VDC | 1000 mA |
| Power draw at 5 VDC | 1200 mA |
| Documentation family | IC695CPU320 |
| Exact revision | GL retained without unsupported decoding |
Source: Official Emerson RX3i system manual and CPU reference documentation.
Verify the installed conditions before this exact model is removed or energized.
Match every item to the installed configuration.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected published products for regional sourcing and exact-code comparison.
PACSystems RX3i Redundancy Memory Xchange Module
Tiffany-verified targetProvides large-memory control execution for an RX3i universal-backplane system. Use the official lifecycle context to plan spares, documentation retention and a controlled migration path without assuming interchangeability.
Confirm cabinet temperature, humidity, contamination, ventilation, altitude and any required approval against the official instructions.
Stage identity, fit and configuration checks before shutdown and prepare a labelled rollback plan plus acceptance test.
Treat the complete nameplate as controlling and approve ratings and compatibility only from exact configuration evidence.
Follow the site isolation, lockout and verification procedure before touching installed wiring or hardware.
No. Family-level data explains context, but final approval still requires the complete code and installed configuration.
Confirm the configured hardware entry, address, communication parameters, diagnostics and dependent devices.
Use the complete model in every message and attach the label, quantity, destination and installed-system notes.
Match the complete order code, installed family, interface, mounting and approved project record before purchase.
Yes. Keep the entire suffix in the quotation, purchase order and receiving record because it can identify a hardware or release revision.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
