other
Products
TC-CCN014 Single-Media ControlNet Interface
TC-CCN014 Single-Media ControlNet Interface
TC-CCN014 Single-Media ControlNet Interface

Honeywell TC-CCN014 Single-Media ControlNet Interface

EMAIL SALES
Honeywell official data reviewed
TC-CCN014 — Single-Media ControlNet Interface

TC-CCN014 is identified by Honeywell as a ControlNet interface for a single media arrangement.

Honeywell ControlNet Interface HardwareSingle-media ControlNet network interfacingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerHoneywell
Documented familyHoneywell ControlNet Interface Hardware
Product formSingle-Media ControlNet Interface
Primary functionSingle-media ControlNet network interfacing
Exact designationTC-CCN014
NetworkControlNet
Media arrangementSingle
Device classInterface module
  • Brand:

    Honeywell
  • Item NO.:

    TC-CCN014
  • Goods Stock:

    1
  • Part Number:

    TC-CCN014
  • Description:

    TC-CCN014 is identified by Honeywell as a ControlNet interface for a single media arrangement.
TC-CCN014 configuration inquiry

Get a precise quote for TC-CCN014

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

TC-CCN014 official identification

TC-CCN014 is identified by Honeywell as a ControlNet interface for a single media arrangement.

System roleSingle-media ControlNet network interfacing
Connection boundarySingle ControlNet media path
Selection focusMatch the exact TC-CCN014 code, single-media topology, node record and installed connector path.
Release evidenceFull model marking, network node record, media-path inspection, communication diagnostic and restart log

Engineering and installation checks

  • undefined
  • Capture the active node and media record before removing the existing interface.
  • Manufacturer verification basis: Honeywell January 2023 System HINTS — ControlNet interface identification.
Official product data

TC-CCN014 key specifications

Exact designation TC-CCN014
Network ControlNet
Media arrangement Single
Device class Interface module

Source: Honeywell January 2023 System HINTS — ControlNet interface identification.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of TC-CCN014.

  • Capture the active node and media record before removing the existing interface.
  • Keep the single network path labelled from connector to trunk connection.
  • Inspect the mating hardware and termination condition before reconnection.
  • Verify node visibility and stable network diagnostics after the controlled restart.
Record the as-found condition and the final full model marking, network node record, media-path inspection, communication diagnostic and restart log
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for TC-CCN014 before purchase approval.

Ordering code
TC-CCN014
Network type
ControlNet
Media count
Single
Installed identity
Match the recorded node assignment
Connection boundary
Retain the existing approved media path
Final selection: Use only the values published for TC-CCN014 in Honeywell January 2023 System HINTS — ControlNet interface identification; site suitability remains an engineering decision.
Recommended model families

More Honeywell models

Honeywell verified models 01Honeywell CC-TCF912Honeywell CC-GAIX21Honeywell CC-GDOL21

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 02Honeywell CC-TSP411 51306669-175Honeywell FC-TCNT11 51307928-176Honeywell 10014/I/F

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 03Honeywell FC-IOTA-NR24 51306507-175Honeywell FC-SCNTO2Honeywell FC-TSDO-04UNI

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 04Honeywell FS-TSDO-04UNIHoneywell FS-TSDO-0824Honeywell FS-TSRO-0824

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Bently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Schneider AP4423ABB 086364-001ABB ACS880-04-330A-7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB NTR012-AABB NDBU-95 64008366DABB RAI02J

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB 3BHE015619R0001 XVD825A01ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Schneider BMXDDO1602Schneider BMENOC0301GE SST-PFB3-VME2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Westinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

TC-CCN014 Order Guide

Use the complete Honeywell designation and installed hardware record for engineering review.
1Ordering identityTC-CCN014
2Official evidenceHoneywell January 2023 System HINTS — ControlNet interface identification
3Installation surveyKeep the single network path labelled from connector to trunk connection.
4Compatibility gateTC-CCN014
5Commissioning recordFull model marking, network node record, media-path inspection, communication diagnostic and restart log
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact TC-CCN014 source record named on this page.
Interface reviewSingle ControlNet media path
Receiving checkMatch the exact TC-CCN014 code, single-media topology, node record and installed connector path.
Release packageFull model marking, network node record, media-path inspection, communication diagnostic and restart log

TC-CCN014 FAQ

What maintenance record preserves the installed identity evidence for TC-CCN014 Single-Media ControlNet Interface in the single-media node restoration record?

Use Match the recorded node assignment as the controlled installed identity value in the Honeywell ControlNet Interface Hardware review. For single-path network interface service, capture the active node and media record before removing the existing interface. Mark the evidence source and revision so future reviewers can reproduce the decision. File this as single-media node restoration checkpoint 1; do not reuse the result for another model or channel group.

How does network limit a proposed TC-CCN014 Single-Media ControlNet Interface substitute in the single-media node restoration record?

Network is published as ControlNet for the Honeywell ControlNet Interface Hardware. For legacy node restoration, keep the single network path labelled from connector to trunk connection. Any mismatch requires an engineering disposition rather than an undocumented field adaptation. File this as single-media node restoration checkpoint 2; do not reuse the result for another model or channel group.

How can a technician test TC-CCN014 Single-Media ControlNet Interface without exceeding the stated ordering code in the single-media node restoration record?

The official TC-CCN014 record gives ordering code as TC-CCN014 for its single-media controlnet interface function. For controlnet cabinet maintenance, inspect the mating hardware and termination condition before reconnection. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request. File this as single-media node restoration checkpoint 3; do not reuse the result for another model or channel group.

When can the TC-CCN014 Single-Media ControlNet Interface installed identity entry be released for quotation in the single-media node restoration record?

For this single-media controlnet network interfacing selection, installed identity is Match the recorded node assignment. For documented communication replacement, verify node visibility and stable network diagnostics after the controlled restart. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification. File this as single-media node restoration checkpoint 4; do not reuse the result for another model or channel group.

How should engineers verify network before fitting TC-CCN014 Single-Media ControlNet Interface in the single-media node restoration record?

Use ControlNet as the controlled network value in the Honeywell ControlNet Interface Hardware review. For single-path network interface service, capture the active node and media record before removing the existing interface. The commissioning sheet should name the instrument, method, acceptance limit and approving person. File this as single-media node restoration checkpoint 5; do not reuse the result for another model or channel group.

What installation decision is controlled by ordering code on TC-CCN014 Single-Media ControlNet Interface in the single-media node restoration record?

Ordering code is published as TC-CCN014 for the Honeywell ControlNet Interface Hardware. For legacy node restoration, keep the single network path labelled from connector to trunk connection. Use the value as a selection boundary, not as a prediction of site performance. File this as single-media node restoration checkpoint 6; do not reuse the result for another model or channel group.

What commissioning check confirms the documented installed identity for TC-CCN014 Single-Media ControlNet Interface in the single-media node restoration record?

The official TC-CCN014 record gives installed identity as Match the recorded node assignment for its single-media controlnet interface function. For controlnet cabinet maintenance, inspect the mating hardware and termination condition before reconnection. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics. File this as single-media node restoration checkpoint 7; do not reuse the result for another model or channel group.

At which review gate should TC-CCN014 Single-Media ControlNet Interface network be challenged in the single-media node restoration record?

For this single-media controlnet network interfacing selection, network is ControlNet. For documented communication replacement, verify node visibility and stable network diagnostics after the controlled restart. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items. File this as single-media node restoration checkpoint 8; do not reuse the result for another model or channel group.

Which drawing or schedule should carry the TC-CCN014 Single-Media ControlNet Interface ordering code record in the single-media node restoration record?

Use TC-CCN014 as the controlled ordering code value in the Honeywell ControlNet Interface Hardware review. For single-path network interface service, capture the active node and media record before removing the existing interface. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement. File this as single-media node restoration checkpoint 9; do not reuse the result for another model or channel group.

Which companion item must agree with installed identity for TC-CCN014 Single-Media ControlNet Interface in the single-media node restoration record?

Installed identity is published as Match the recorded node assignment for the Honeywell ControlNet Interface Hardware. For legacy node restoration, keep the single network path labelled from connector to trunk connection. Log the comparison against the controlled parts list before the item enters the cabinet. File this as single-media node restoration checkpoint 10; do not reuse the result for another model or channel group.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Honeywell ControlNet Interface Hardware application review

TC-CCN014 Applications

These contexts use the manufacturer-documented function of TC-CCN014; each requires a separate site-fit decision.

Application contexts

01 · Single-path network interface serviceApply the documented single-media controlnet network interfacing only after confirming ordering code as TC-CCN014.
02 · Legacy node restorationApply the documented single-media controlnet network interfacing only after confirming network type as ControlNet.
03 · ControlNet cabinet maintenanceApply the documented single-media controlnet network interfacing only after confirming media count as Single.
04 · Documented communication replacementApply the documented single-media controlnet network interfacing only after confirming installed identity as Match the recorded node assignment.

Why choose Nordwel

Traceable identityTC-CCN014 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to single-media controlnet network interfacing, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain TC-CCN014, Single ControlNet media path, and the approved site record as three independent checks.
Need help matching this Honeywell configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp