other
Products
DI572 S500-eCo AC Digital Input Module
DI572 S500-eCo AC Digital Input Module
DI572 S500-eCo AC Digital Input Module

ABB DI572 S500-eCo AC Digital Input Module

EMAIL SALES
ABB official data reviewed
DI572 — S500-eCo AC Digital Input Module

ABB lists DI572 in the S500-eCo digital input portfolio. The reviewed record combines its exact identity with published electrical, channel, connection and installation data.

S500-eCo digital inputSixteen-channel AC status acquisitionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Exact modelDI572
Input channels16 digital inputs
Input voltage100…240 V AC
Channel grouping2 groups
IsolationModule-wise galvanic isolation
Terminal blocks9-pin + 11-pin
MountingDIN rail or wall mounting
Minimum device indexA1 for I/O firmware 3.0.14 or later
  • Brand:

    ABB
  • Item NO.:

    DI572
  • Goods Stock:

    1
  • Part Number:

    DI572
  • Description:

    DI572 is an ABB s500-eco ac digital input module documented for sixteen-channel ac status acquisition. This page retains the complete order identity and manufacturer-published selection data.
DI572 configuration inquiry

Get a precise quote for DI572

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DI572 official identification

Selection review for DI572 starts with the manufacturer record, then checks the installed interface and application duty as separate approval points.

Operating scopeSixteen-channel AC status acquisition
Mating arrangementI/O bus with one 9-pin and one 11-pin terminal block
Host platformS500-eCo digital input
Verification sourceABB Automation Builder online help and AC500 hardware manual

Engineering and installation checks

  • ABB identifies DI572 as s500-eco ac digital input module.
  • Input channels: 16 digital inputs.
  • Isolation: Module-wise galvanic isolation.
  • Manufacturer verification basis: ABB Automation Builder online help and AC500 hardware manual.
Official product data

DI572 key specifications

Input channels 16 digital inputs
Input voltage 100…240 V AC
Channel grouping 2 groups
Isolation Module-wise galvanic isolation
Terminal blocks 9-pin + 11-pin
Mounting DIN rail or wall mounting
Minimum device index A1 for I/O firmware 3.0.14 or later

Source: ABB Automation Builder online help and AC500 hardware manual.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Seat DI572 on the documented i/o bus with one 9-pin and one 11-pin terminal block arrangement and inspect every mating contact before power is applied.
  • Record the installed input voltage as 100…240 V AC and preserve the existing terminal or network labels.
  • Check enclosure protection, horizontal or vertical mounting, airflow, temperature and conductor strain against the ABB installation instructions.
  • After energization, verify status indicators, diagnostics and the controlled sixteen-channel ac status acquisition test before returning the loop or network to service.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Exact hardware identity
DI572
Input channels
16 digital inputs
Channel grouping
2 groups
Installed interface
I/O bus with one 9-pin and one 11-pin terminal block
Engineering boundary
Match ABB configuration and device revision for sixteen-channel ac status acquisition
Final selection: Select DI572 only after the complete article identity, input voltage, channel grouping, host hardware and installed wiring have been matched to the approved project record.
Recommended model families

More ABB models

ABB verified models 01ABB DA502ABB AO561ABB AI562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 02ABB TU532ABB TU531ABB CM577-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 03ABB CI522-MODTCPABB CI521-MODTCPABB CI512-ETHCAT

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 04ABB CI511-ETHCATABB CI502-PNIOABB CI501-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Westinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPE

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Load Cell Central OM-19-2Schneider AP4423ABB 086364-001

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB ACS880-04-330A-7ABB NTR012-AABB NDBU-95 64008366D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB RAI02JABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01ABB DSTA002B 3BSE018317R1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602Schneider BMENOC0301

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DI572 Order Guide

Use the complete ABB designation and installed hardware record for engineering review.
1Full designationDI572; do not shorten or append an unverified suffix.
2Documented device classS500-eCo AC Digital Input Module
3Primary system roleSixteen-channel AC status acquisition
4Input channels16 digital inputs
5Mating arrangementI/O bus with one 9-pin and one 11-pin terminal block
6ABB verification recordABB Automation Builder online help and AC500 hardware manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

DI572 identity controlReconcile the order code, device label and input channels.
Input voltage reviewConfirm 100…240 V AC against the installed load or network.
Connection-file auditPreserve i/o bus with one 9-pin and one 11-pin terminal block drawings and labels.
Commissioning evidenceCapture diagnostics and a controlled sixteen-channel ac status acquisition result.

DI572 FAQ

What field record should accompany DI572 when input channels is 16 digital inputs?

Use the complete DI572 designation together with input channels 16 digital inputs. Reject any record that changes a suffix, article identity or documented device class.

For sixteen-channel ac status acquisition, which quotation evidence confirms DI572 with input channels 16 digital inputs?

Include the nameplate, quantity, installed base or terminal unit, clear connector photographs, destination and the approved drawing that defines i/o bus with one 9-pin and one 11-pin terminal block.

How does the DI572 s500-eco ac digital input module with input channels 16 digital inputs serve sixteen-channel ac status acquisition?

ABB documents the unit for sixteen-channel ac status acquisition. The project must independently confirm that this role matches the existing architecture and controlled cause-and-effect.

Before moving DI572 wiring for sixteen-channel ac status acquisition, what must be retained for channel grouping 2 groups?

Document I/O bus with one 9-pin and one 11-pin terminal block. Retain terminal numbers, polarity, shielding, grounding, device addresses and cable identifiers exactly as found.

For sixteen-channel ac status acquisition, after energizing DI572, how should isolation Module-wise galvanic isolation be checked?

Review LEDs and diagnostics, then test the relevant channels or communication path without bypassing site interlocks. File the result with the maintenance record.

Which mounting review supports sixteen-channel ac status acquisition for DI572 at input channels 16 digital inputs?

Allow for the documented mating hardware, conductor bend radius, service access and the ABB environmental limits. Do not infer dimensions from a neighboring module.

Why must terminal blocks 9-pin + 11-pin stay with DI572 for sixteen-channel ac status acquisition approval?

The review must preserve terminal blocks 9-pin + 11-pin; then validate mounting DIN rail or wall mounting against the field requirement.

Can another s500-eco digital input device replace DI572 when input channels 16 digital inputs or mounting differs?

Compare every published channel, protocol, voltage, current, terminal and lifecycle field. A similar family name is not evidence that the alternative is interchangeable.

At receipt for sixteen-channel ac status acquisition, which input voltage 100…240 V AC evidence confirms DI572?

Inspect the label for DI572, verify the expected s500-eco ac digital input module, check connector condition and reconcile supplied accessories with the approved purchase record.

Which controlled documents authorize DI572, input channels 16 digital inputs, for sixteen-channel ac status acquisition?

The approved hardware configuration, I/O or network drawings, protection settings and commissioning procedure must collectively confirm sixteen-channel ac status acquisition.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
S500-eCo digital input application review

DI572 Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · DI572 controlled replacementPreserve the complete DI572 identity when replacing an installed unit during a planned outage.
02 · Sixteen-channel AC status acquisition retrofit reviewConfirm that the approved architecture still requires sixteen-channel ac status acquisition before changing hardware.
03 · S500-eCo digital input spare verificationValidate terminal, base, firmware and drawing compatibility for an on-site s500-eco digital input spare.
04 · 100…240 V AC application checkUse the ABB-published input voltage value 100…240 V AC as a selection checkpoint.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify DI572. Check first: Seat DI572 on the documented i/o bus with one 9-pin and one 11-pin terminal block arrangement and inspect every mating contact before power is applied.
Need help matching this ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp