other
Products
CE4003S2B10 16-Channel HART Analog Input Assembly
CE4003S2B10 16-Channel HART Analog Input Assembly
CE4003S2B10 16-Channel HART Analog Input Assembly

Emerson CE4003S2B10 16-Channel HART Analog Input Assembly

EMAIL SALES
Emerson official data reviewed
CE4003S2B10 — 16-Channel HART Analog Input Assembly

A simplex Series 2 Plus analog input assembly for sixteen 4–20 mA HART channels using a four-wire standard termination block.

DeltaV M-series Series 2 Plus I/OFour-wire 4–20 mA HART signal acquisitionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Series 2 Plus I/O
Product form16-Channel HART Analog Input Assembly
Primary functionFour-wire 4–20 mA HART signal acquisition
Analog directionInput
Channel count16
Signal range4–20 mA
Digital protocolHART
  • Brand:

    Emerson
  • Item NO.:

    CE4003S2B10
  • Goods Stock:

    1
  • Part Number:

    CE4003S2B10
  • Description:

    A simplex Series 2 Plus analog input assembly for sixteen 4–20 mA HART channels using a four-wire standard termination block.
CE4003S2B10 configuration inquiry

Get a precise quote for CE4003S2B10

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4003S2B10 official identification

A simplex Series 2 Plus analog input assembly for sixteen 4–20 mA HART channels using a four-wire standard termination block.

System roleFour-wire 4–20 mA HART signal acquisition
Connection boundary4-wire standard I/O termination block
Selection focusConfirm four-wire field power topology and the B10 standard termination block.
Release evidenceLoop-power diagram, HART device inventory, channel calibration and diagnostic scan

Engineering and installation checks

  • undefined
  • Separate transmitter power conductors from the measured loop pair.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4003S2B10 key specifications

Analog direction Input
Channel count 16
Signal range 4–20 mA
Digital protocol HART
Wiring method 4 wire
Termination Standard I/O block
Card generation Series 2 Plus
Redundancy Simplex

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4003S2B10.

  • Separate transmitter power conductors from the measured loop pair.
  • Map all sixteen channels to the four-wire termination assignments.
  • Retain shields and grounds exactly as shown in the loop drawings.
  • Calibrate current endpoints and confirm HART communication per channel.
Record the as-found condition and the final loop-power diagram, hart device inventory, channel calibration and diagnostic scan
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4003S2B10 before purchase approval.

Loop type
4-wire transmitters
Measured signal
4–20 mA
Device communication
HART
Capacity
16 input channels
Termination hardware
B10 four-wire standard block
Final selection: Use only the values published for CE4003S2B10 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson KJ4002X1-CA1Emerson KJ3002X1-BH1Emerson VE4005S2B2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson VE4005S2B3Emerson CE4001S2T1B1Emerson CE4001S2T2B7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson CE4002S1T2B6Emerson CE4002S1T2B8Emerson CE4003S2B9

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CE4031S2T2B6Emerson CE4032S1T2B8Emerson CE4033S2B10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4003S2B10 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4003S2B10
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyMap all sixteen channels to the four-wire termination assignments.
4Compatibility gate4-wire transmitters
5Commissioning recordLoop-power diagram, HART device inventory, channel calibration and diagnostic scan
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4003S2B10 source record named on this page.
Interface review4-wire standard I/O termination block
Receiving checkConfirm four-wire field power topology and the B10 standard termination block.
Release packageLoop-power diagram, HART device inventory, channel calibration and diagnostic scan

CE4003S2B10 FAQ

At which review gate should CE4003S2B10 16-Channel HART Analog Input Assembly device communication be challenged?

For this four-wire 4–20 ma hart signal acquisition selection, device communication is HART. For externally powered transmitters, separate transmitter power conductors from the measured loop pair. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

Which drawing or schedule should carry the CE4003S2B10 16-Channel HART Analog Input Assembly analog direction record?

Use Input as the controlled analog direction value in the DeltaV M-series Series 2 Plus I/O review. For analyzer input collection, map all sixteen channels to the four-wire termination assignments. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which companion item must agree with digital protocol for CE4003S2B10 16-Channel HART Analog Input Assembly?

Digital protocol is published as HART for the DeltaV M-series Series 2 Plus I/O. For four-wire flow measurement, retain shields and grounds exactly as shown in the loop drawings. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How should a discrepancy in card generation be closed for CE4003S2B10 16-Channel HART Analog Input Assembly?

The official CE4003S2B10 record gives card generation as Series 2 Plus for its 16-channel hart analog input assembly function. For hart asset diagnostics, calibrate current endpoints and confirm HART communication per channel. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

What receiving evidence is required for the measured signal stated for CE4003S2B10 16-Channel HART Analog Input Assembly?

For this four-wire 4–20 ma hart signal acquisition selection, measured signal is 4–20 mA. For externally powered transmitters, separate transmitter power conductors from the measured loop pair. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How is termination hardware separated from site-specific assumptions for CE4003S2B10 16-Channel HART Analog Input Assembly?

Use B10 four-wire standard block as the controlled termination hardware value in the DeltaV M-series Series 2 Plus I/O review. For analyzer input collection, map all sixteen channels to the four-wire termination assignments. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How should signal range be written in the purchase record for CE4003S2B10 16-Channel HART Analog Input Assembly?

Signal range is published as 4–20 mA for the DeltaV M-series Series 2 Plus I/O. For four-wire flow measurement, retain shields and grounds exactly as shown in the loop drawings. Use the value as a selection boundary, not as a prediction of site performance.

What field observation validates termination for CE4003S2B10 16-Channel HART Analog Input Assembly?

The official CE4003S2B10 record gives termination as Standard I/O block for its 16-channel hart analog input assembly function. For hart asset diagnostics, calibrate current endpoints and confirm HART communication per channel. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

What fault could result from misreading loop type on CE4003S2B10 16-Channel HART Analog Input Assembly?

For this four-wire 4–20 ma hart signal acquisition selection, loop type is 4-wire transmitters. For externally powered transmitters, separate transmitter power conductors from the measured loop pair. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

What photograph or measurement proves capacity on received CE4003S2B10 16-Channel HART Analog Input Assembly?

Use 16 input channels as the controlled capacity value in the DeltaV M-series Series 2 Plus I/O review. For analyzer input collection, map all sixteen channels to the four-wire termination assignments. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Series 2 Plus I/O application review

CE4003S2B10 Applications

These contexts use the manufacturer-documented function of CE4003S2B10; each requires a separate site-fit decision.

Application contexts

01 · Externally powered transmittersApply the documented four-wire 4–20 ma hart signal acquisition only after confirming loop type as 4-wire transmitters.
02 · Analyzer input collectionApply the documented four-wire 4–20 ma hart signal acquisition only after confirming measured signal as 4–20 mA.
03 · Four-wire flow measurementApply the documented four-wire 4–20 ma hart signal acquisition only after confirming device communication as HART.
04 · HART asset diagnosticsApply the documented four-wire 4–20 ma hart signal acquisition only after confirming capacity as 16 input channels.

Why choose Nordwel

Traceable identityCE4003S2B10 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to four-wire 4–20 ma hart signal acquisition, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4003S2B10, 4-wire standard I/O termination block, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp