other
Products
CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly
CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly
CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly

Emerson CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly

EMAIL SALES
Emerson official data reviewed
CE4003S2B9 — 16-Channel Two-Wire HART Analog Input Assembly

A simplex Series 2 Plus analog input card for sixteen two-wire 4–20 mA HART loops with a standard termination block.

DeltaV M-series Series 2 Plus I/OTwo-wire 4–20 mA HART transmitter inputExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Series 2 Plus I/O
Product form16-Channel Two-Wire HART Analog Input Assembly
Primary functionTwo-wire 4–20 mA HART transmitter input
Measurement directionInput
Available channels16
Current signal4–20 mA
Communication overlayHART
  • Brand:

    Emerson
  • Item NO.:

    CE4003S2B9
  • Goods Stock:

    1
  • Part Number:

    CE4003S2B9
  • Description:

    A simplex Series 2 Plus analog input card for sixteen two-wire 4–20 mA HART loops with a standard termination block.
CE4003S2B9 configuration inquiry

Get a precise quote for CE4003S2B9

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4003S2B9 official identification

A simplex Series 2 Plus analog input card for sixteen two-wire 4–20 mA HART loops with a standard termination block.

System roleTwo-wire 4–20 mA HART transmitter input
Connection boundary2-wire standard I/O termination block
Selection focusConfirm loop-powered two-wire devices and B9 termination before replacing B10 or other variants.
Release evidenceLoop-voltage survey, polarity check, HART tag comparison and sixteen-channel calibration

Engineering and installation checks

  • undefined
  • Verify adequate loop voltage at the farthest two-wire transmitter.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4003S2B9 key specifications

Measurement direction Input
Available channels 16
Current signal 4–20 mA
Communication overlay HART
Field wiring 2 wire
Termination block Standard I/O, B9
Hardware level Series 2 Plus
Configuration Simplex

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4003S2B9.

  • Verify adequate loop voltage at the farthest two-wire transmitter.
  • Observe polarity while landing each pair on the B9 block.
  • Keep intrinsic-safety interface details with the individual loop record where used.
  • Compare HART device tags with the configured channel database.
Record the as-found condition and the final loop-voltage survey, polarity check, hart tag comparison and sixteen-channel calibration
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4003S2B9 before purchase approval.

Transmitter supply
Loop powered
Conductor count
Two per loop
Analog range
4–20 mA
Protocol requirement
HART-capable channel
Block selection
B9 standard termination
Final selection: Use only the values published for CE4003S2B9 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson VE4005S2B2Emerson VE4005S2B3Emerson CE4001S2T1B1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CE4001S2T2B7Emerson CE4002S1T2B6Emerson CE4002S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson CE4003S2B10Emerson CE4031S2T2B6Emerson CE4032S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CE4033S2B10Emerson CE4036P2Emerson CS6002

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0520F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7551-1AB00-0AB06ES7553-1AA00-0AB06ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4003S2B9 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4003S2B9
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyObserve polarity while landing each pair on the B9 block.
4Compatibility gateLoop powered
5Commissioning recordLoop-voltage survey, polarity check, HART tag comparison and sixteen-channel calibration
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4003S2B9 source record named on this page.
Interface review2-wire standard I/O termination block
Receiving checkConfirm loop-powered two-wire devices and B9 termination before replacing B10 or other variants.
Release packageLoop-voltage survey, polarity check, HART tag comparison and sixteen-channel calibration

CE4003S2B9 FAQ

What photograph or measurement proves protocol requirement on received CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

Use HART-capable channel as the controlled protocol requirement value in the DeltaV M-series Series 2 Plus I/O review. For pressure transmitter loops, verify adequate loop voltage at the farthest two-wire transmitter. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which available channels value identifies the reviewed CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly configuration?

Available channels is published as 16 for the DeltaV M-series Series 2 Plus I/O. For loop-powered level devices, observe polarity while landing each pair on the B9 block. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

Why does field wiring matter when selecting CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

The official CE4003S2B9 record gives field wiring as 2 wire for its 16-channel two-wire hart analog input assembly function. For hart temperature inputs, keep intrinsic-safety interface details with the individual loop record where used. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

Which mismatch involving configuration should stop approval of CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

For this two-wire 4–20 ma hart transmitter input selection, configuration is Simplex. For two-wire flow instruments, compare HART device tags with the configured channel database. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What maintenance record preserves the analog range evidence for CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

Use 4–20 mA as the controlled analog range value in the DeltaV M-series Series 2 Plus I/O review. For pressure transmitter loops, verify adequate loop voltage at the farthest two-wire transmitter. Release is appropriate only when the manufacturer value and the project requirement agree.

How does measurement direction limit a proposed CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly substitute?

Measurement direction is published as Input for the DeltaV M-series Series 2 Plus I/O. For loop-powered level devices, observe polarity while landing each pair on the B9 block. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly without exceeding the stated communication overlay?

The official CE4003S2B9 record gives communication overlay as HART for its 16-channel two-wire hart analog input assembly function. For hart temperature inputs, keep intrinsic-safety interface details with the individual loop record where used. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly hardware level entry be released for quotation?

For this two-wire 4–20 ma hart transmitter input selection, hardware level is Series 2 Plus. For two-wire flow instruments, compare HART device tags with the configured channel database. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify conductor count before fitting CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

Use Two per loop as the controlled conductor count value in the DeltaV M-series Series 2 Plus I/O review. For pressure transmitter loops, verify adequate loop voltage at the farthest two-wire transmitter. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by block selection on CE4003S2B9 16-Channel Two-Wire HART Analog Input Assembly?

Block selection is published as B9 standard termination for the DeltaV M-series Series 2 Plus I/O. For loop-powered level devices, observe polarity while landing each pair on the B9 block. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Series 2 Plus I/O application review

CE4003S2B9 Applications

These contexts use the manufacturer-documented function of CE4003S2B9; each requires a separate site-fit decision.

Application contexts

01 · Pressure transmitter loopsApply the documented two-wire 4–20 ma hart transmitter input only after confirming transmitter supply as Loop powered.
02 · Loop-powered level devicesApply the documented two-wire 4–20 ma hart transmitter input only after confirming conductor count as Two per loop.
03 · HART temperature inputsApply the documented two-wire 4–20 ma hart transmitter input only after confirming analog range as 4–20 mA.
04 · Two-wire flow instrumentsApply the documented two-wire 4–20 ma hart transmitter input only after confirming protocol requirement as HART-capable channel.

Why choose Nordwel

Traceable identityCE4003S2B9 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to two-wire 4–20 ma hart transmitter input, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4003S2B9, 2-wire standard I/O termination block, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp