A legacy CPU 414-2 article identified in Siemens official communication-processor compatibility records with hardware level 2.
Brand:
SIEMENSItem NO.:
6ES7414-2XG02-0AB0Goods Stock:
1Part Number:
6ES7414-2XG02-0AB0Description:
A legacy CPU 414-2 article identified in Siemens official communication-processor compatibility records with hardware level 2.A legacy CPU 414-2 article identified in Siemens official communication-processor compatibility records with hardware level 2.
| Exact article | 6ES7414-2XG02-0AB0 |
|---|---|
| CPU designation | CPU 414-2 |
| Documented hardware level | 2 |
| Official evidence | Communication-processor compatibility list |
| Technical-data boundary | Unlisted values omitted |
Source: Siemens official CPU and communication-processor compatibility list.
Prepare 6ES7414-2XG02-0AB0 from documented physical, electrical and project conditions before work begins.
Approve 6ES7414-2XG02-0AB0 only when every listed selection boundary agrees with the installed system.
Use this group when recover the original project, communication partners and rack position.
Compare each candidate against exact article and hardware level 2.
Keep communication compatibility must follow the installed project and official matrix as its own decision.
Release only with nameplate image, hardware level, archived project and network inventory.
The legacy central program execution requirement stays traceable to the approved project.
Do not extend data beyond this boundary: Official reviewed material confirms the CPU 414-2 identity and hardware level 2; memory, dimensions and electrical ratings are not inferred for this page.
Catalog checkpoint: The official compatibility list identifies 6ES7414-2XG02-0AB0 as CPU 414-2 at hardware level 2.
Configuration checkpoint: Detailed current product specifications were not located in the reviewed manufacturer material and are deliberately omitted.
Use installed evidence to close the remaining site-specific checks for 6ES7414-2XG02-0AB0.
Confirm quantity and destination only after the technical record is complete.
Inspect received labels and connections before the item reaches the cabinet.
Close commissioning with the test evidence assigned to 6ES7414-2XG02-0AB0.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Output-module reference for control-system projects.
Tiffany-verified targetEthernet-module reference for network compatibility review.
Tiffany-verified targetProximity-sensor reference for machinery applications.
Tiffany-verified targetAccelerometer reference for vibration-monitoring projects.
Tiffany-verified targetProcessor-module reference for installed control systems.
Tiffany-verified targetAnalog-input board reference for replacement review.
Tiffany-verified targetIt identifies 6ES7414-2XG02-0AB0 as a CPU 414-2 and records hardware level 2; the page does not extend that evidence to unstated ratings.
No exact-model memory figure was located in the reviewed official material, so adding a value from a neighboring revision would violate the evidence boundary.
Photograph the complete side or front label, keep the image readable, and reconcile the level with both the official matrix and the archived hardware configuration.
Secure the source project, current configuration, access credentials, diagnostic status and a verified restoration method under change control.
List each processor article and revision, locate the corresponding CPU row in the official matrix, and retain the matrix edition used for the decision.
No. Family identity does not resolve article suffix, hardware level, firmware behavior, project support or connected communication hardware.
Quarantine the item, compare the purchase record and request an authorized disposition before it reaches the cabinet.
Use a photographed slot map with connector and cable labels, then require a second-person check during removal and reinstallation.
Confirm diagnostics, run state, input/output updates, network partners and the plant functions named in the site acceptance procedure.
Evaluate it as a separate engineered migration with explicit hardware, software, interface and acceptance evidence; do not treat it as an automatic replacement.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
