other
Products
7MH4900-3AA01 SIWAREX FTC Weighing Module
7MH4900-3AA01 SIWAREX FTC Weighing Module
7MH4900-3AA01 SIWAREX FTC Weighing Module

Siemens 7MH4900-3AA01 SIWAREX FTC Weighing Module

EMAIL SALES
Siemens official data reviewed
7MH4900-3AA01 — SIWAREX FTC Weighing Module

A single-channel weighing module for belt scales, solids flowmeters and loss-in-weight applications using analog strain-gauge load cells.

SIWAREX FTC weighing electronicsContinuous weighing and force measurementExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familySIWAREX FTC weighing electronics
Product formSIWAREX FTC Weighing Module
Primary functionContinuous weighing and force measurement
Channels1
Digital inputs7
Digital outputs8
Load-cell sensitivity1–4 mV/V
  • Brand:

    SIEMENS
  • Item NO.:

    7MH4900-3AA01
  • Goods Stock:

    1
  • Part Number:

    7MH4900-3AA01
  • Description:

    A single-channel weighing module for belt scales, solids flowmeters and loss-in-weight applications using analog strain-gauge load cells.
7MH4900-3AA01 configuration inquiry

Get a precise quote for 7MH4900-3AA01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

7MH4900-3AA01 official identification

A single-channel weighing module for belt scales, solids flowmeters and loss-in-weight applications using analog strain-gauge load cells.

System roleContinuous weighing and force measurement
Connection boundaryAnalog load-cell input with digital I/O, serial interfaces and analog output
Selection focusConfirm load-cell sensitivity, process function, I/O allocation and host-rack compatibility.
Release evidenceLoad-cell record, wiring schedule, calibration file and controlled test-weight result

Engineering and installation checks

  • undefined
  • Separate low-level load-cell wiring from noisy power conductors.
  • Manufacturer verification basis: Siemens 7MH4900-3AA01 official product record.
Official product data

7MH4900-3AA01 key specifications

Channels 1
Digital inputs 7
Counter inputs 1
Digital outputs 8
Analog outputs 1
RS485 interfaces 1
RS232 interfaces 1
Load-cell interface 1
Load-cell sensitivity 1–4 mV/V
Lifecycle Phase-out started; discontinued 2023-10-01

Source: Siemens 7MH4900-3AA01 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 7MH4900-3AA01.

  • Separate low-level load-cell wiring from noisy power conductors.
  • Verify bridge excitation and signal polarity before calibration.
  • Document each digital and serial connection against the approved design.
  • Perform zero, span and process-function checks using the project procedure.
Record the as-found condition and the final load-cell record, wiring schedule, calibration file and controlled test-weight result
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 7MH4900-3AA01 before purchase approval.

Measurement element
Analog full-bridge strain-gauge load cell
Sensitivity range
1–4 mV/V
Application mode
Belt, flow, loss-in-weight or force measurement
Host arrangement
Approved rack and engineering environment
Calibration
Project-specific calibration is mandatory
Final selection: Use only the values published for 7MH4900-3AA01 in Siemens 7MH4900-3AA01 official product record; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7553-1AA00-0AB06ED1052-1MD08-0BA2AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

7MH4900-3AA01 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity7MH4900-3AA01
2Official evidenceSiemens 7MH4900-3AA01 official product record
3Installation surveyVerify bridge excitation and signal polarity before calibration.
4Compatibility gateAnalog full-bridge strain-gauge load cell
5Commissioning recordLoad-cell record, wiring schedule, calibration file and controlled test-weight result
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 7MH4900-3AA01 source record named on this page.
Interface reviewAnalog load-cell input with digital I/O, serial interfaces and analog output
Receiving checkConfirm load-cell sensitivity, process function, I/O allocation and host-rack compatibility.
Release packageLoad-cell record, wiring schedule, calibration file and controlled test-weight result

7MH4900-3AA01 FAQ

How should engineers verify digital outputs before fitting 7MH4900-3AA01 SIWAREX FTC Weighing Module?

Use 8 as the controlled digital outputs value in the SIWAREX FTC weighing electronics review. For belt scale control, separate low-level load-cell wiring from noisy power conductors. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by rs232 interfaces on 7MH4900-3AA01 SIWAREX FTC Weighing Module?

RS232 interfaces is published as 1 for the SIWAREX FTC weighing electronics. For solids flow measurement, verify bridge excitation and signal polarity before calibration. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented lifecycle for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

The official 7MH4900-3AA01 record gives lifecycle as Phase-out started; discontinued 2023-10-01 for its siwarex ftc weighing module function. For loss-in-weight dosing, document each digital and serial connection against the approved design. Check the mating device, protective hardware and configured function before energization.

At which review gate should 7MH4900-3AA01 SIWAREX FTC Weighing Module application mode be challenged?

For this continuous weighing and force measurement selection, application mode is Belt, flow, loss-in-weight or force measurement. For industrial force measurement, perform zero, span and process-function checks using the project procedure. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the 7MH4900-3AA01 SIWAREX FTC Weighing Module channels record?

Use 1 as the controlled channels value in the SIWAREX FTC weighing electronics review. For belt scale control, separate low-level load-cell wiring from noisy power conductors. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which companion item must agree with digital outputs for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

Digital outputs is published as 8 for the SIWAREX FTC weighing electronics. For solids flow measurement, verify bridge excitation and signal polarity before calibration. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How should a discrepancy in rs232 interfaces be closed for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

The official 7MH4900-3AA01 record gives rs232 interfaces as 1 for its siwarex ftc weighing module function. For loss-in-weight dosing, document each digital and serial connection against the approved design. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What receiving evidence is required for the lifecycle stated for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

For this continuous weighing and force measurement selection, lifecycle is Phase-out started; discontinued 2023-10-01. For industrial force measurement, perform zero, span and process-function checks using the project procedure. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How is application mode separated from site-specific assumptions for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

Use Belt, flow, loss-in-weight or force measurement as the controlled application mode value in the SIWAREX FTC weighing electronics review. For belt scale control, separate low-level load-cell wiring from noisy power conductors. Release is appropriate only when the manufacturer value and the project requirement agree.

How should channels be written in the purchase record for 7MH4900-3AA01 SIWAREX FTC Weighing Module?

Channels is published as 1 for the SIWAREX FTC weighing electronics. For solids flow measurement, verify bridge excitation and signal polarity before calibration. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SIWAREX FTC weighing electronics application review

7MH4900-3AA01 Applications

These contexts use the manufacturer-documented function of 7MH4900-3AA01; each requires a separate site-fit decision.

Application contexts

01 · Belt scale controlApply the documented continuous weighing and force measurement only after confirming measurement element as Analog full-bridge strain-gauge load cell.
02 · Solids flow measurementApply the documented continuous weighing and force measurement only after confirming sensitivity range as 1–4 mV/V.
03 · Loss-in-weight dosingApply the documented continuous weighing and force measurement only after confirming application mode as Belt, flow, loss-in-weight or force measurement.
04 · Industrial force measurementApply the documented continuous weighing and force measurement only after confirming host arrangement as Approved rack and engineering environment.

Why choose Nordwel

Traceable identity7MH4900-3AA01 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to continuous weighing and force measurement, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 7MH4900-3AA01, Analog load-cell input with digital I/O, serial interfaces and analog output, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp