Runs deterministic control logic and coordinates backplane I/O and communication modules. 300 MHz processor, 10 MB user memory; GV release corresponds to firmware 5.70.
Brand:
General ElectricItem NO.:
IC695CPU310-GVGoods Stock:
1Part Number:
IC695CPU310-GVDescription:
Runs deterministic control logic and coordinates backplane I/O and communication modulesRuns deterministic control logic and coordinates backplane I/O and communication modules. 300 MHz processor, 10 MB user memory; GV release corresponds to firmware 5.70.
| Processor | 300 MHz |
|---|---|
| User memory | 10 MB |
| GV firmware release | 5.70 |
| Backplane context | RX3i universal backplane |
| Power draw at 3.3 VDC | 1250 mA |
| Power draw at 5 VDC | 1000 mA |
| Exact revision | GV retained for firmware and receiving control |
Source: Official Emerson IC695CPU310 release history and RX3i system manual.
Verify the installed conditions before this exact model is removed or energized.
Match every item to the installed configuration.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected published products for regional sourcing and exact-code comparison.
Runs deterministic control logic and coordinates backplane I/O and communication modules. Verify the complete model, quantity, label condition, connector integrity and supplied accessories against the purchase record.
Confirm normal power status, absence of faults, expected communication and a controlled functional test before service release.
Include identity checks, wiring or connector map, configuration restored, measured results, alarms tested and final authorization.
Provide the complete code, quantity, clear label image, installed-system context, destination and required timing.
Keep it dry, protected from static and impact, traceably labelled and within the manufacturer storage conditions.
Only after connector type, pin assignment, shielding, grounding, damage and route suitability are verified.
Use the official lifecycle context to plan spares, documentation retention and a controlled migration path without assuming interchangeability.
Confirm cabinet temperature, humidity, contamination, ventilation, altitude and any required approval against the official instructions.
Stage identity, fit and configuration checks before shutdown and prepare a labelled rollback plan plus acceptance test.
Treat the complete nameplate as controlling and approve ratings and compatibility only from exact configuration evidence.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
