other
Products
MEL-BSSRH-CC MasterLogic 50 Mixed-Media Ethernet I/O Adapter
MEL-BSSRH-CC MasterLogic 50 Mixed-Media Ethernet I/O Adapter
MEL-BSSRH-CC MasterLogic 50 Mixed-Media Ethernet I/O Adapter

Honeywell MEL-BSSRH-CC MasterLogic 50 Mixed-Media Ethernet I/O Adapter

EMAIL SALES
Honeywell official data reviewed
MEL-BSSRH-CC — Mixed-media Ethernet I/O adapter

The complete MEL-BSSRH-CC identity belongs to the MasterLogic 50 mixed-media Smart Remote I/O adapter family.

MasterLogic 50 Smart Remote I/OCopper-and-fiber remote I/O adaptationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyMasterLogic 50 Smart Remote I/O
Exact modelMEL-BSSRH-CC
Verified functionCopper-and-fiber remote I/O adaptation
Interface boundary100BASE-TX copper plus fiber family interface
Network mediaCopper and fiber
Selection basisConfirm the complete -CC label, port media, fiber mode and installed firmware record.
  • Brand:

    Honeywell
  • Item NO.:

    MEL-BSSRH-CC
  • Goods Stock:

    1
  • Part Number:

    MEL-BSSRH-CC
  • Description:

    The complete MEL-BSSRH-CC identity belongs to the MasterLogic 50 mixed-media Smart Remote I/O adapter family.
MEL-BSSRH-CC configuration inquiry

Get a precise quote for MEL-BSSRH-CC

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

MEL-BSSRH-CC official identification

The complete MEL-BSSRH-CC identity belongs to the MasterLogic 50 mixed-media Smart Remote I/O adapter family.

System responsibilityCopper-and-fiber remote I/O adaptation
Connection envelope100BASE-TX copper plus fiber family interface
Procurement decisionConfirm the complete -CC label, port media, fiber mode and installed firmware record.
Acceptance recordExact label, installed hardware record and functional test results for MEL-BSSRH-CC.

Engineering and installation checks

  • Use MEL-BSSRH-CC as the controlling receiving and quotation identity.
  • Check the installed design against 100base-tx copper plus fiber family interface.
  • Release the unit only after confirming copper-and-fiber remote i/o adaptation in the intended assembly.
Official product data

MEL-BSSRH-CC key specifications

Exact model MEL-BSSRH-CC
Module family MasterLogic 50
Adapter role Smart Remote I/O
Copper interface 100BASE-TX UTP/CAT5
Additional medium Multi-mode or single-mode fiber

Source: Honeywell official MasterLogic publications.

Pre-order check 01

Installation environment

Prepare the installation record for MEL-BSSRH-CC before field work begins.

  • Record the complete MEL-BSSRH-CC nameplate before removal or installation.
  • Verify 100base-tx copper plus fiber family interface against the approved wiring or system drawing.
  • Confirm the required carrier, terminal, host or interface hardware before energization.
  • Complete a point-by-point or function-by-function acceptance test for copper-and-fiber remote i/o adaptation.
Keep the full ordering code, wiring record and acceptance result together.
Pre-order check 02

Compatibility confirmation

Approve the item only when every published boundary agrees with the installed design.

Exact identity
MEL-BSSRH-CC
Product family
MasterLogic 50 Smart Remote I/O
Functional boundary
Copper-and-fiber remote I/O adaptation
Installation boundary
100BASE-TX copper plus fiber family interface
Network media
Copper and fiber
Final selection: retain the exact MEL-BSSRH-CC identity and confirm installation suitability against the approved engineering record.
Recommended model families

More Honeywell models

Honeywell verified models 01Honeywell MLI-DN60SUHoneywell MLI-DP60SUHoneywell MLI-DP40SU

Each target page carries the approved Tiffany Guan contact details.

Honeywell verified models 02Honeywell MLI-DR28UHoneywell MLI-DN32UHoneywell MLC-DN32H/DC

Each target page carries the approved Tiffany Guan contact details.

Honeywell verified models 03Honeywell MLL-CSEAHoneywell MLL-CMEAHoneywell MLL-PMEC

Each target page carries the approved Tiffany Guan contact details.

Honeywell verified models 04Honeywell MLL-EIPTHoneywell MLC-DN64H/DCHoneywell MLI-DN64H

Each target page carries the approved Tiffany Guan contact details.

Need help matching an installed unit?CHECK WITH SALES
Additional published brands

Additional Advantage Models

Published model group 01Siemens 6ED1052-1MD08-0BA2Siemens 6ES7521-7EH00-0AB0Siemens 6ES7414-3FM07-0AB0

Each target page carries the approved Tiffany Guan contact details.

Published model group 02Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0

Each target page carries the approved Tiffany Guan contact details.

Published model group 03ABB AI563ABB AO568Yokogawa ATSS3D-0

Each target page carries the approved Tiffany Guan contact details.

Published model group 04Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0

Each target page carries the approved Tiffany Guan contact details.

Published model group 05Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0

Each target page carries the approved Tiffany Guan contact details.

Published model group 06Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0Siemens 7MH4900-3AA01

Each target page carries the approved Tiffany Guan contact details.

Published model group 07Siemens 6FC5370-5AA20-0AA0Siemens 6SL3352-3AG38-8AA0Siemens 6AG1155-6AU01-7BN0

Each target page carries the approved Tiffany Guan contact details.

Published model group 08GE IC086SLN080-AGE IC200ALG230DSiemens 6ES7553-1AA00-0AB0

Each target page carries the approved Tiffany Guan contact details.

Need a coordinated cross-brand quotation?EMAIL TIFFANY

MEL-BSSRH-CC Order Guide

Use the complete Honeywell designation and installed hardware record for engineering review.

1Ordering identityMEL-BSSRH-CC
2Published functionCopper-and-fiber remote I/O adaptation
3Installed-condition capture100BASE-TX copper plus fiber family interface
4Hardware fitConfirm the complete -CC label, port media, fiber mode and installed firmware record.
5Commissioning proofRecord functional test results for copper-fiber transition panel.
6Release packageNameplate, wiring or host record, inspection result and approval.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of MEL-BSSRH-CC.

Support scope

Network mediaCopper and fiber
Functional scopeCopper-and-fiber remote I/O adaptation
Installation boundary100BASE-TX copper plus fiber family interface
Acceptance packageExact label, installed hardware record and functional test result

MEL-BSSRH-CC FAQ

How should a technician document MEL-BSSRH-CC during a controlled replacement?

Photograph the original and replacement labels, record mating hardware and wiring positions, and attach the functional test result. Keep the exact model value of MEL-BSSRH-CC in the inspection record.

What installation mistake should be avoided with MEL-BSSRH-CC?

Do not assume adjacent family members share the same wiring or interface limits. Confirm 100base-tx copper plus fiber family interface and isolate the circuit before changing connections.

Which cabinet or machine record should reference MEL-BSSRH-CC?

The bill of materials, I/O or network schedule, wiring drawing and commissioning sheet should all use the exact MEL-BSSRH-CC identity for firmware-controlled remote rack.

How is the published copper interface value used during acceptance for MEL-BSSRH-CC?

Verify 100BASE-TX UTP/CAT5 against the received unit and the installed design. It is a selection boundary and must be confirmed together with the complete model and mating hardware.

What should be checked before energizing MEL-BSSRH-CC?

Confirm the exact label, protective measures, supply or signal boundary, terminals and configured function. Energize only after the point-to-point review supports copper-and-fiber remote i/o adaptation.

What receiving evidence confirms MEL-BSSRH-CC for legacy adapter replacement?

Use the complete MEL-BSSRH-CC label, the approved purchase description and the installed-system record. The controlled published value for exact model is MEL-BSSRH-CC; any mismatch requires hold-and-review before installation.

How should engineers verify module family before wiring MEL-BSSRH-CC?

Treat MasterLogic 50 as the documented module family boundary. Compare it with the field drawing, terminal plan and measured supply or interface condition before conductors are landed.

Which compatibility item is most important when replacing MEL-BSSRH-CC in coated mixed-media I/O node?

Confirm 100base-tx copper plus fiber family interface, then verify the carrier, terminal, host or interface hardware. A matching housing alone does not establish functional compatibility.

What commissioning result demonstrates the intended function of MEL-BSSRH-CC?

Commission the installed channel, output, controller or display function against an approved test case for copper-and-fiber remote i/o adaptation. Record the expected state, observed state and acceptance decision.

Can MEL-BSSRH-CC be selected from its family name alone?

No. Keep MEL-BSSRH-CC as the purchasing identity and use MasterLogic 50 Smart Remote I/O only as system context. The full order code must match the quotation, received label and maintenance record.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
MasterLogic 50 Smart Remote I/O application review

MEL-BSSRH-CC Applications

Each application below requires its own installed-system evidence and exact-model confirmation.

Application contexts

01 · coated mixed-media I/O nodeApply copper-and-fiber remote i/o adaptation only after confirming exact model as MEL-BSSRH-CC.
02 · copper-fiber transition panelApply copper-and-fiber remote i/o adaptation only after confirming module family as MasterLogic 50.
03 · legacy adapter replacementApply copper-and-fiber remote i/o adaptation only after confirming adapter role as Smart Remote I/O.
04 · firmware-controlled remote rackApply copper-and-fiber remote i/o adaptation only after confirming copper interface as 100BASE-TX UTP/CAT5.

Why choose Nordwel

Exact identity controlMEL-BSSRH-CC remains the sole purchasing identity.
Published boundary review100BASE-TX copper plus fiber family interface is checked independently.
Network media traceabilityCopper and fiber
Coordinated releaseTiffany manages quotation, receiving evidence and acceptance records.
Keep exact identity, interface fit and final acceptance as separate decisions for MEL-BSSRH-CC.
Need Tiffany to verify the MEL-BSSRH-CC evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp