other
Products
6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module
6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module
6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module

Siemens 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module

EMAIL SALES
Siemens official data reviewed
6AG1155-6AU01-7BN0 — SIPLUS IM155-6 PN ST Interface Module

A conformal-coated IM155-6 PN ST interface module for up to 32 local I/O modules and 16 downstream ET 200AL modules.

ET 200SP coated interface modulesRemote I/O station interface for harsh environmentsExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familyET 200SP coated interface modules
Product formSIPLUS IM155-6 PN ST Interface Module
Primary functionRemote I/O station interface for harsh environments
Product designationIM155-6 PN ST
Based on6ES7155-6AU01-0BN0
CoatingConformal coated
Operating range−40 to +70 °C
  • Brand:

    SIEMENS
  • Item NO.:

    6AG1155-6AU01-7BN0
  • Goods Stock:

    1
  • Part Number:

    6AG1155-6AU01-7BN0
  • Description:

    A conformal-coated IM155-6 PN ST interface module for up to 32 local I/O modules and 16 downstream ET 200AL modules.
6AG1155-6AU01-7BN0 configuration inquiry

Get a precise quote for 6AG1155-6AU01-7BN0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6AG1155-6AU01-7BN0 official identification

A conformal-coated IM155-6 PN ST interface module for up to 32 local I/O modules and 16 downstream ET 200AL modules.

System roleRemote I/O station interface for harsh environments
Connection boundaryPROFINET with one BusAdapter slot
Selection focusConfirm coated variant, temperature range, BusAdapter, station size and base product revision.
Release evidenceArticle number, BusAdapter identity, module count and network diagnostic test

Engineering and installation checks

  • undefined
  • Verify the conformal-coated order code rather than only the base module.
  • Manufacturer verification basis: Siemens 6AG1155-6AU01-7BN0 official product record.
Official product data

6AG1155-6AU01-7BN0 key specifications

Product designation IM155-6 PN ST
Based on 6ES7155-6AU01-0BN0
Coating Conformal coated
Operating range −40 to +70 °C
BusAdapter slots 1
Local I/O modules Maximum 32
Downstream modules Maximum 16 ET 200AL
Module replacement Single hot swap
Supply 24 VDC
Power loss 1.9 W typical

Source: Siemens 6AG1155-6AU01-7BN0 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 6AG1155-6AU01-7BN0.

  • Verify the conformal-coated order code rather than only the base module.
  • Install the correct BusAdapter and document both network ports.
  • Keep the configured local and downstream module counts within published limits.
  • Test station diagnostics and a controlled single-module replacement procedure.
Record the as-found condition and the final article number, busadapter identity, module count and network diagnostic test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 6AG1155-6AU01-7BN0 before purchase approval.

Base hardware
6ES7155-6AU01-0BN0
Environment
−40 to +70 °C coated application
Station capacity
32 local plus 16 downstream modules maximum
Network
PROFINET through one BusAdapter
Replacement mode
Single hot swap only
Final selection: Use only the values published for 6AG1155-6AU01-7BN0 in Siemens 6AG1155-6AU01-7BN0 official product record; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7654-7HC00-0XA06ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7551-1AB00-0AB06ES7553-1AA00-0AB0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CM598-CNDC562DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6AG1155-6AU01-7BN0 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6AG1155-6AU01-7BN0
2Official evidenceSiemens 6AG1155-6AU01-7BN0 official product record
3Installation surveyInstall the correct BusAdapter and document both network ports.
4Compatibility gate6ES7155-6AU01-0BN0
5Commissioning recordArticle number, BusAdapter identity, module count and network diagnostic test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 6AG1155-6AU01-7BN0 source record named on this page.
Interface reviewPROFINET with one BusAdapter slot
Receiving checkConfirm coated variant, temperature range, BusAdapter, station size and base product revision.
Release packageArticle number, BusAdapter identity, module count and network diagnostic test

6AG1155-6AU01-7BN0 FAQ

Which drawing or schedule should carry the 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module busadapter slots record?

Use 1 as the controlled busadapter slots value in the ET 200SP coated interface modules review. For harsh-environment remote i/o, verify the conformal-coated order code rather than only the base module. Release is appropriate only when the manufacturer value and the project requirement agree.

Which companion item must agree with module replacement for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

Module replacement is published as Single hot swap for the ET 200SP coated interface modules. For coated control cabinet, install the correct BusAdapter and document both network ports. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How should a discrepancy in base hardware be closed for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

The official 6AG1155-6AU01-7BN0 record gives base hardware as 6ES7155-6AU01-0BN0 for its siplus im155-6 pn st interface module function. For extended-temperature station, keep the configured local and downstream module counts within published limits. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

What receiving evidence is required for the network stated for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

For this remote i/o station interface for harsh environments selection, network is PROFINET through one BusAdapter. For remote i/o modernization, test station diagnostics and a controlled single-module replacement procedure. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How is based on separated from site-specific assumptions for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

Use 6ES7155-6AU01-0BN0 as the controlled based on value in the ET 200SP coated interface modules review. For harsh-environment remote i/o, verify the conformal-coated order code rather than only the base module. Mark the evidence source and revision so future reviewers can reproduce the decision.

How should busadapter slots be written in the purchase record for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

BusAdapter slots is published as 1 for the ET 200SP coated interface modules. For coated control cabinet, install the correct BusAdapter and document both network ports. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What field observation validates module replacement for 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

The official 6AG1155-6AU01-7BN0 record gives module replacement as Single hot swap for its siplus im155-6 pn st interface module function. For extended-temperature station, keep the configured local and downstream module counts within published limits. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

What fault could result from misreading base hardware on 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

For this remote i/o station interface for harsh environments selection, base hardware is 6ES7155-6AU01-0BN0. For remote i/o modernization, test station diagnostics and a controlled single-module replacement procedure. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

What photograph or measurement proves network on received 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module?

Use PROFINET through one BusAdapter as the controlled network value in the ET 200SP coated interface modules review. For harsh-environment remote i/o, verify the conformal-coated order code rather than only the base module. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which based on value identifies the reviewed 6AG1155-6AU01-7BN0 SIPLUS IM155-6 PN ST Interface Module configuration?

Based on is published as 6ES7155-6AU01-0BN0 for the ET 200SP coated interface modules. For coated control cabinet, install the correct BusAdapter and document both network ports. Use the value as a selection boundary, not as a prediction of site performance.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ET 200SP coated interface modules application review

6AG1155-6AU01-7BN0 Applications

These contexts use the manufacturer-documented function of 6AG1155-6AU01-7BN0; each requires a separate site-fit decision.

Application contexts

01 · Harsh-environment remote I/OApply the documented remote i/o station interface for harsh environments only after confirming base hardware as 6ES7155-6AU01-0BN0.
02 · Coated control cabinetApply the documented remote i/o station interface for harsh environments only after confirming environment as −40 to +70 °C coated application.
03 · Extended-temperature stationApply the documented remote i/o station interface for harsh environments only after confirming station capacity as 32 local plus 16 downstream modules maximum.
04 · Remote I/O modernizationApply the documented remote i/o station interface for harsh environments only after confirming network as PROFINET through one BusAdapter.

Why choose Nordwel

Traceable identity6AG1155-6AU01-7BN0 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to remote i/o station interface for harsh environments, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 6AG1155-6AU01-7BN0, PROFINET with one BusAdapter slot, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp