A 74712 high-temperature two-wire velocity transducer for vertical / 90-degree orientation, with 4.5 Hz (270 cpm) minimum operating frequency, isolated circular M10×1 base, top-mount connector and no approval option.
Brand:
Bently NevadaItem NO.:
74712-03-11-02-00Goods Stock:
1Part Number:
74712-03-11-02-00Weight:
See exact manufacturer shipment dataDimensions:
102 mm high × 41 mm diameterCertification:
00 — no approvalsDescription:
A 74712 high-temperature two-wire velocity transducer for vertical / 90-degree orientation, with 4.5 Hz (270 cpm) minimum operating frequency, isolated circular M10×1 base, top-mount connector and no approval option.Bently Nevada identifies 74712-03-11-02-00 as high-temperature two-wire Seismoprobe velocity transducer. A 74712 high-temperature two-wire velocity transducer for vertical / 90-degree orientation, with 4.5 Hz (270 cpm) minimum operating frequency, isolated circular M10×1 base, top-mount connector and no approval option.
Published 8 mm and NSv proximity probe options with verified sales contact details.
Published 5 mm, 11 mm, 25 mm and 50 mm proximity sensing options.
Verified probe housings, mounting hardware and cable accessories.
Verified vibration, thrust, speed and machinery-monitoring products.
Verified Siemens analog-input, analog-output and temperature-measurement modules.
Verified S7-200 SMART CPUs, communication boards and compact digital I/O.
Published 8 mm and NSv proximity probe configurations.
Verified 5 mm, 11 mm, 25 mm, 50 mm and ceramic-capped probe options.
Verified probe housings, mounting studs and system cable accessories.
Published velocity, thrust, speed and vibration-sensing products.
Verified protection relays, controllers and machinery-monitoring products.
Additional verified automation, monitoring and I/O products published on Nordwel.
Use the exact manufacturer order number and verify the system constraints before procurement.
Quote 74712-03-11-02-00 exactly, including leading zeros, country suffixes and any MOD reference.
Confirm whether the order is for a probe, cable, sensor, transmitter, housing, accessory or control module.
Check thread, connector, mounting, cable length, power and field wiring against the installed drawings.
Do not mix unmatched transducer-system lengths, families, calibrations or host platforms.
Confirm the destination hazardous-area and country approval requirement from the current manufacturer record.
Provide a clear nameplate photograph and the equipment drawing with the commercial inquiry.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Bently Nevada official product documentation for this exact order number.
90° ±2.5°
4.5 Hz (270 cpm)
Option 11 is an isolated circular base with an M10×1 stud.
Option 02 specifies a top-mount connector.
No. The final 00 means no approval option.
The 74712 is the high-temperature two-wire Seismoprobe family rated to +204°C under the documented conditions.
No. The mounting angle is part of the transducer calibration and ordering identity.
Choose a manufacturer-listed Seismoprobe cable with the required connector, temperature rating and exact length.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
