other
Products
VS6003 DeltaV SISNet Distance Extender Pair
VS6003 DeltaV SISNet Distance Extender Pair
VS6003 DeltaV SISNet Distance Extender Pair

Emerson VS6003 DeltaV SISNet Distance Extender Pair

EMAIL SALES
Emerson official data reviewed
VS6003 — DeltaV SISNet Distance Extender Pair

A redundant pair of DeltaV SISNet distance extenders associated with KJ2222X1-BA1 hardware for extending safety-rated fiber communication between remote SISNet nodes.

DeltaV SISNet fiber componentsRedundant conversion between multimode and single-mode SISNet fiberExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Commercial modelVS6003
Hardware identityKJ2222X1-BA1
Network purposeRemote SISNet extension
Power input24 VDC, 250 mA maximum
Multimode interfaceDuplex SC
Single-mode interfaceDuplex LC
Temperature range−40 to +70 °C
Protection ratingIP20 / NEMA 12
  • Brand:

    Emerson
  • Item NO.:

    VS6003
  • Goods Stock:

    1
  • Part Number:

    VS6003
  • Description:

    A redundant pair of DeltaV SISNet distance extenders associated with KJ2222X1-BA1 hardware for extending safety-rated fiber communication between remote SISNet nodes.
VS6003 configuration inquiry

Get a precise quote for VS6003

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

VS6003 official identification

A redundant pair of DeltaV SISNet distance extenders associated with KJ2222X1-BA1 hardware for extending safety-rated fiber communication between remote SISNet nodes.

Conversion taskMultimode-to-single-mode optical conversion
Redundancy boundaryInstall as one extender on each SISNet ring
Selection controlVerify connector, optical budget and paired quantity
Acceptance proofRecord both labels and prove both communication paths

Engineering and installation checks

  • VS6003 is documented as a redundant SISNet distance-extender order, while KJ2222X1-BA1 is the exact hardware identity used for technical verification.
  • The extender converts multimode SISNet signals to single-mode fiber and does not replace the SISNet repeater.
  • Manufacturer verification basis: Emerson DeltaV SISNet Fiber Components and the official KJ2222X1-BA1 certification sheet.
Official product data

VS6003 key specifications

Commercial reference VS6003
Hardware part number KJ2222X1-BA1
Supply 24 VDC, 250 mA maximum
Multimode connector Duplex SC
Single-mode connector Duplex LC
Nominal multimode distance 2 km one way
Nominal single-mode distance 60 km one way
Operating temperature −40 to +70 °C
Relative humidity 5–95%, non-condensing
Protection IP20 / NEMA 12

Source: Emerson DeltaV SISNet Fiber Components and KJ2222X1-BA1 official records.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of VS6003.

  • Mount both extenders on DIN rail with the documented airflow and hazardous-area clearances.
  • Land the 24 VDC conductors on the four-position terminal without reversing supply and return.
  • Keep SC multimode jumpers on the repeater side and LC single-mode links between distance extenders.
  • Measure fiber attenuation and confirm both counter-rotating rings before functional release.
Record the as-found condition and the final commercial reference, both hardware labels, optical-loss calculation and dual-ring communication test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for VS6003 before purchase approval.

Commercial identity
VS6003 redundant pair
Installed hardware
Two KJ2222X1-BA1 distance extenders
Local optical side
Multimode SC connection to SISNet repeater
Remote optical side
Single-mode LC connection between extenders
Network release
Both redundant rings pass communication and diagnostic checks
Final selection: Use only the values published for VS6003 in Emerson DeltaV SISNet Fiber Components and KJ2222X1-BA1 official records; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson VE3051C1Emerson VE3051C2Emerson VE3051C3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson VE3051C4Emerson KJ4002X1-BA1Emerson KJ4002X1-CA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson KJ3002X1-BH1Emerson VE4005S2B2Emerson VE4005S2B3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson VE4005S2B4Emerson VE4035S2B4Emerson VE4005S2B5

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0720F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

VS6003 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Commercial orderRetain VS6003 as the requested commercial reference.
2Hardware labelsConfirm two KJ2222X1-BA1 devices are included.
3Optical designReview SC/LC connectors, fiber type and attenuation.
4Power designProvide a verified 24 VDC supply for each extender.
5Redundancy testProve primary and secondary SISNet paths separately.
6Handover recordArchive labels, optical readings and network diagnostics.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Identity reconciliationMatch VS6003 to the paired KJ2222X1-BA1 hardware before quotation.
Fiber reviewCheck connector polish, fiber type and total link attenuation.
Hazardous-area recordRetain the applicable approval and installation drawing.
Commissioning evidenceStore power, LED and redundant-ring test results.

VS6003 FAQ

Is VS6003 a single extender or a redundant assembly?

VS6003 is documented as a redundant SISNet distance-extender order. Confirm that the delivered scope contains two KJ2222X1-BA1 units so one device can serve each SISNet ring.

Which hardware number should appear on the VS6003 devices?

Use KJ2222X1-BA1 as the hardware identity. Record both labels during receiving inspection and keep VS6003 as the commercial ordering reference.

Where are the multimode and single-mode fibers connected?

The multimode side uses duplex SC connections toward the SISNet repeater. The long-distance side uses duplex LC connections between the two distance extenders.

How far can the VS6003 optical link extend?

The manufacturer data gives a nominal 2 km one-way multimode span and a nominal 60 km one-way single-mode span. Actual distance remains limited by measured fiber attenuation and connector losses.

What power supply is required for KJ2222X1-BA1?

Provide 24 VDC with a maximum current requirement of 250 mA per extender. Verify polarity and terminal assignment before energization.

Can VS6003 replace a SISNet repeater?

No. It extends the optical distance between SISNet repeaters by converting multimode signals to single-mode fiber; it does not perform the repeater role.

What environmental limits must be checked before installation?

Confirm an ambient range of −40 to +70 °C, 5–95% non-condensing humidity and an enclosure appropriate to the IP20/NEMA 12 component rating.

How should the redundant fiber paths be commissioned?

Test each counter-rotating ring independently, verify receive indicators at every node and retain the diagnostic results with the optical-loss measurements.

Which mismatch should stop a VS6003 quotation?

Stop approval if the commercial reference, paired quantity, KJ2222X1-BA1 labels, connector types or fiber design do not match the installed safety-network record.

What records should accompany a VS6003 replacement?

Keep photographs of both labels, 24 VDC measurements, fiber type and length, attenuation readings, connector map and the final redundant-ring communication test.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV SISNet fiber components application review

VS6003 Applications

These contexts use the manufacturer-documented function of VS6003; each requires a separate site-fit decision.

Application contexts

01 · Long-distance safety-node couplingApply the documented redundant conversion between multimode and single-mode sisnet fiber only after confirming commercial identity as VS6003 redundant pair.
02 · Separated process-area SIS linksApply the documented redundant conversion between multimode and single-mode sisnet fiber only after confirming installed hardware as Two KJ2222X1-BA1 distance extenders.
03 · Redundant plant fiber backboneApply the documented redundant conversion between multimode and single-mode sisnet fiber only after confirming local optical side as Multimode SC connection to SISNet repeater.
04 · Remote logic-solver inter-trip networkApply the documented redundant conversion between multimode and single-mode sisnet fiber only after confirming remote optical side as Single-mode LC connection between extenders.

Why choose Nordwel

Extended reachSingle-mode links support remote SISNet nodes beyond the local multimode span.
Independent pathsA paired arrangement preserves the two counter-rotating safety rings.
Traceable hardwareKJ2222X1-BA1 provides the exact device identity for receiving inspection.
Controlled handoverPower, optics and diagnostics are documented as separate acceptance checks.
Application boundary: retain VS6003, Duplex SC multimode fiber, duplex LC single-mode fiber and 24 VDC power, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp