other
Products
IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable
IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable
IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable

GE IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable

EMAIL SALES
GE official data reviewed
IC200CBL600C — VersaMax One-Metre Single-Ended Expansion Cable

A prefabricated one-metre cable for a single-ended VersaMax expansion-rack connection. The complete ordering identity is IC200CBL600C.

VersaMax expansion accessoriesSingle-ended local expansion-rack connectionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax expansion accessories
Exact modelIC200CBL600C
Verified functionSingle-ended local expansion-rack connection
Interface boundaryOne-metre prefabricated cable between a main rack and one expansion rack
Base catalog numberIC200CBL600
Selection basisConfirm cable length, ports and orientation.
  • Brand:

    General Electric
  • Item NO.:

    IC200CBL600C
  • Goods Stock:

    1
  • Part Number:

    IC200CBL600C
  • Description:

    A prefabricated one-metre cable for a single-ended VersaMax expansion-rack connection. The complete ordering identity is IC200CBL600C.
IC200CBL600C configuration inquiry

Get a precise quote for IC200CBL600C

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200CBL600C official identification

A prefabricated one-metre cable for a single-ended VersaMax expansion-rack connection. The complete ordering identity is IC200CBL600C.

Operating scopeSingle-ended local expansion-rack connection
Mating arrangementOne-metre prefabricated cable between a main rack and one expansion rack
Host platformOne main rack and one local expansion rack
Field verificationcomplete cable label, connector condition, one-metre route, rack topology and continuity test; exact IC200CBL600C identity

Engineering and installation checks

  • The ordering and receiving identity is IC200CBL600C.
  • Record both rack identities and cable routing before disturbing the installed connection.
  • The technical definition follows Emerson VersaMax PLC User’s Manual GFK-1503F.
Official product data

IC200CBL600C key specifications

Base catalog number IC200CBL600
Accessory type Single-ended expansion cable
Cable length 1 metre
System arrangement Main rack to one expansion rack
Receiver pairing IC200ERM002 non-isolated expansion receiver
Maximum single-ended route 1 metre

Source: Emerson VersaMax PLC User’s Manual GFK-1503F.

Pre-order check 01

Installation environment

Prepare the versamax one-metre single-ended expansion cable by recording its installed connections, settings and complete IC200CBL600C label.

  • Record both rack identities and cable routing before disturbing the installed connection.
  • De-energize the main and expansion rack power supplies before mating either connector. Record IC200CBL600C on the acceptance sheet.
  • Secure the prefabricated cable without sharp bends, tension or unsupported connector weight.
  • Restore power and verify expansion-rack scanning and module diagnostics.
Close the work with complete cable label, connector condition, one-metre route, rack topology and continuity test; exact IC200CBL600C identity.
Pre-order check 02

Compatibility confirmation

Approve IC200CBL600C only when the documented function and every listed interface boundary agree with the installed design.

Base function
IC200CBL600 single-ended expansion cable
Topology
One main rack and one local expansion rack
Distance boundary
One-metre single-ended connection
Receiver requirement
Non-isolated IC200ERM002 expansion receiver
Revision identity
IC200CBL600C
Final selection: Use only the values published for IC200CBL600C in Emerson VersaMax PLC User’s Manual GFK-1503F; site suitability remains an engineering decision.
Recommended model families

More GE models

GE verified models 01GE IC200ALG264GGE IC200ALG264LGE IC200ALG265D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 02GE IC200ALG265GGE IC200ALG320FGE IC200ALG322G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 03GE IC200ALG326KGE IC200ALG327GE IC200ALG328D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 04GE IC200ALG630-GDGE IC086SLN080-AGE IC200ALG230D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB AO568ABB CD522ABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CI542-DPABB CI592-CS31ABB CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CM598-CNABB DC562ABB DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB DO572ABB PM5032-R-ETHABB PM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB PM564-RP-ACYokogawa ATSA3S-0Yokogawa ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200CBL600C Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200CBL600C
2Configuration captureRecord both rack identities and cable routing before disturbing the installed connection.
3Mechanical fitDe-energize the main and expansion rack power supplies before mating either connector. Record IC200CBL600C on the acceptance sheet.
4Connection reviewSecure the prefabricated cable without sharp bends, tension or unsupported connector weight.
5Commissioning proofcomplete cable label, connector condition, one-metre route, rack topology and continuity test; exact IC200CBL600C identity
6Release decisionConfirm IC200CBL600C; confirm a single expansion rack, one-metre route, matching expansion ports and correct cable orientation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200CBL600C.

Support scope

Accessory type reviewSingle-ended expansion cable is checked against the received unit.
Topology reviewOne main rack and one local expansion rack
Cable length checkpoint1 metre
Acceptance packagecomplete cable label, connector condition, one-metre route, rack topology and continuity test; exact IC200CBL600C identity

IC200CBL600C FAQ

What fault could result from misreading receiver requirement on IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

For this single-ended local expansion-rack connection selection, receiver requirement is Non-isolated IC200ERM002 expansion receiver. For single local expansion rack, record both rack identities and cable routing before disturbing the installed connection. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves accessory type on received IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

Use Single-ended expansion cable as the controlled accessory type value in the VersaMax expansion accessories review. For compact panel expansion for ic200cbl600c, de-energize the main and expansion rack power supplies before mating either connector. Record IC200CBL600C on the acceptance sheet. Release is appropriate only when the manufacturer value and the project requirement agree.

Which receiver pairing value identifies the reviewed IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable configuration?

Receiver pairing is published as IC200ERM002 non-isolated expansion receiver for the VersaMax expansion accessories. For cpu-to-expansion connection, secure the prefabricated cable without sharp bends, tension or unsupported connector weight. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does topology matter when selecting IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

For IC200CBL600C, topology as One main rack and one local expansion rack for its versamax one-metre single-ended expansion cable function. For revision-controlled cable replacement, restore power and verify expansion-rack scanning and module diagnostics. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving revision identity should stop approval of IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

For this single-ended local expansion-rack connection selection, revision identity is IC200CBL600C. For single local expansion rack, record both rack identities and cable routing before disturbing the installed connection. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What maintenance record preserves the cable length evidence for IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

Use 1 metre as the controlled cable length value in the VersaMax expansion accessories review. For compact panel expansion for ic200cbl600c, de-energize the main and expansion rack power supplies before mating either connector. Record IC200CBL600C on the acceptance sheet. Mark the evidence source and revision so future reviewers can reproduce the decision.

How does maximum single-ended route limit a proposed IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable substitute?

Maximum single-ended route is published as 1 metre for the VersaMax expansion accessories. For cpu-to-expansion connection, secure the prefabricated cable without sharp bends, tension or unsupported connector weight. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How can a technician test IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable without exceeding the stated distance boundary?

For IC200CBL600C, distance boundary as One-metre single-ended connection for its versamax one-metre single-ended expansion cable function. For revision-controlled cable replacement, restore power and verify expansion-rack scanning and module diagnostics. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

When can the IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable base catalog number entry be released for quotation?

For this single-ended local expansion-rack connection selection, base catalog number is IC200CBL600. For single local expansion rack, record both rack identities and cable routing before disturbing the installed connection. If the received label and controlled record disagree, hold the item until the exact identity is reconciled.

How should engineers verify system arrangement before fitting IC200CBL600C VersaMax One-Metre Single-Ended Expansion Cable?

Use Main rack to one expansion rack as the controlled system arrangement value in the VersaMax expansion accessories review. For compact panel expansion for ic200cbl600c, de-energize the main and expansion rack power supplies before mating either connector. Record IC200CBL600C on the acceptance sheet. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax expansion accessories application review

IC200CBL600C Applications

These contexts use IC200CBL600C for single-ended local expansion-rack connection, with project-specific connection and commissioning evidence.

Application contexts

01 · Single local expansion rackApply the documented single-ended local expansion-rack connection only after confirming base function as IC200CBL600 single-ended expansion cable.
02 · Compact panel expansion for IC200CBL600CApply the documented single-ended local expansion-rack connection only after confirming topology as One main rack and one local expansion rack.
03 · CPU-to-expansion connectionApply the documented single-ended local expansion-rack connection only after confirming distance boundary as One-metre single-ended connection.
04 · Revision-controlled cable replacementApply the documented single-ended local expansion-rack connection only after confirming receiver requirement as Non-isolated IC200ERM002 expansion receiver.

Why choose Nordwel

Base catalog number traceabilityIC200CBL600C is reviewed against IC200CBL600.
Accessory type controlSingle-ended expansion cable is checked independently.
Distance boundary fitOne-metre single-ended connection
Coordinated releaseTiffany manages quotation, receiving evidence and commissioning records for IC200CBL600C.
Keep ordering identity, system fit and final acceptance as separate decisions for IC200CBL600C.
Need Tiffany to verify the IC200CBL600C acceptance package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp