other
Products
ASV220F-M5-06 Speed Exhaust Controller
ASV220F-M5-06 Speed Exhaust Controller
ASV220F-M5-06 Speed Exhaust Controller

SMC ASV220F-M5-06 Speed Exhaust Controller

EMAIL SALES
SMC official data reviewed
ASV220F-M5-06 — Speed Exhaust Controller

A compact speed exhaust controller combining flow adjustment and rapid exhaust for an M5 port and 6 mm tubing.

SMC ASV SeriesCombined cylinder speed and quick-exhaust controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSMC
Documented familySMC ASV Series
Product formSpeed Exhaust Controller
Primary functionCombined cylinder speed and quick-exhaust control
Tube outside diameter6 mm
Port threadM5 × 0.8
Controller functionSpeed exhaust
Hexagon width8 mm
  • Brand:

    Others
  • Item NO.:

    ASV220F-M5-06
  • Goods Stock:

    1
  • Part Number:

    ASV220F-M5-06
  • Description:

    A compact speed exhaust controller combining flow adjustment and rapid exhaust for an M5 port and 6 mm tubing.
ASV220F-M5-06 configuration inquiry

Get a precise quote for ASV220F-M5-06

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

ASV220F-M5-06 official identification

A compact speed exhaust controller combining flow adjustment and rapid exhaust for an M5 port and 6 mm tubing.

System roleCombined cylinder speed and quick-exhaust control
Connection boundaryM5 × 0.8 thread with 6 mm tube connection
Selection focusConfirm the cylinder port thread, tube diameter and required exhaust path.
Release evidencePort fit, tube pull check, exhaust direction and end-of-stroke behavior

Engineering and installation checks

  • undefined
  • Fit the M5 thread without transferring load into the resin body.
  • Manufacturer verification basis: SMC ASV Series Speed Exhaust Controller catalog.
Official product data

ASV220F-M5-06 key specifications

Tube outside diameter 6 mm
Port thread M5 × 0.8
Controller function Speed exhaust
Hexagon width 8 mm
Body diameter D1 11.6 mm
Body diameter D2 9.6 mm
Length L1 23.6 mm
Length L2 28.4 mm
Length L3 11.1 mm
Length L4 31.4 mm

Source: SMC ASV Series Speed Exhaust Controller catalog.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of ASV220F-M5-06.

  • Fit the M5 thread without transferring load into the resin body.
  • Route the 6 mm tube so it does not obstruct the exhaust opening.
  • Set speed from a low-flow starting position during controlled cycling.
  • Check that exhaust air cannot create a personnel or contamination hazard.
Record the as-found condition and the final port fit, tube pull check, exhaust direction and end-of-stroke behavior
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for ASV220F-M5-06 before purchase approval.

Actuator port
M5 × 0.8
Tubing
6 mm outside diameter
Envelope
L4 31.4 mm maximum reference length
Tool access
8 mm hexagon
Circuit objective
Metering with local rapid exhaust
Final selection: Use only the values published for ASV220F-M5-06 in SMC ASV Series Speed Exhaust Controller catalog; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

SMC verified models 016ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 026ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 03AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 04CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7553-1AA00-0AB06ED1052-1MD08-0BA2CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CM598-CNDC562DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

ASV220F-M5-06 Order Guide

Use the complete SMC designation and installed hardware record for engineering review.
1Ordering identityASV220F-M5-06
2Official evidenceSMC ASV Series Speed Exhaust Controller catalog
3Installation surveyRoute the 6 mm tube so it does not obstruct the exhaust opening.
4Compatibility gateM5 × 0.8
5Commissioning recordPort fit, tube pull check, exhaust direction and end-of-stroke behavior
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact ASV220F-M5-06 source record named on this page.
Interface reviewM5 × 0.8 thread with 6 mm tube connection
Receiving checkConfirm the cylinder port thread, tube diameter and required exhaust path.
Release packagePort fit, tube pull check, exhaust direction and end-of-stroke behavior

ASV220F-M5-06 FAQ

How should engineers verify hexagon width before fitting ASV220F-M5-06 Speed Exhaust Controller?

Use 8 mm as the controlled hexagon width value in the SMC ASV Series review. For short-stroke cylinder cycling, fit the M5 thread without transferring load into the resin body. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by length l1 on ASV220F-M5-06 Speed Exhaust Controller?

Length L1 is published as 23.6 mm for the SMC ASV Series. For compact gripper exhaust, route the 6 mm tube so it does not obstruct the exhaust opening. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented length l4 for ASV220F-M5-06 Speed Exhaust Controller?

The official ASV220F-M5-06 record gives length l4 as 31.4 mm for its speed exhaust controller function. For assembly fixture motion, set speed from a low-flow starting position during controlled cycling. Check the mating device, protective hardware and configured function before energization.

At which review gate should ASV220F-M5-06 Speed Exhaust Controller envelope be challenged?

For this combined cylinder speed and quick-exhaust control selection, envelope is L4 31.4 mm maximum reference length. For high-cycle pneumatic tooling, check that exhaust air cannot create a personnel or contamination hazard. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the ASV220F-M5-06 Speed Exhaust Controller tube outside diameter record?

Use 6 mm as the controlled tube outside diameter value in the SMC ASV Series review. For short-stroke cylinder cycling, fit the M5 thread without transferring load into the resin body. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which companion item must agree with hexagon width for ASV220F-M5-06 Speed Exhaust Controller?

Hexagon width is published as 8 mm for the SMC ASV Series. For compact gripper exhaust, route the 6 mm tube so it does not obstruct the exhaust opening. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How should a discrepancy in length l1 be closed for ASV220F-M5-06 Speed Exhaust Controller?

The official ASV220F-M5-06 record gives length l1 as 23.6 mm for its speed exhaust controller function. For assembly fixture motion, set speed from a low-flow starting position during controlled cycling. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What receiving evidence is required for the length l4 stated for ASV220F-M5-06 Speed Exhaust Controller?

For this combined cylinder speed and quick-exhaust control selection, length l4 is 31.4 mm. For high-cycle pneumatic tooling, check that exhaust air cannot create a personnel or contamination hazard. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How is envelope separated from site-specific assumptions for ASV220F-M5-06 Speed Exhaust Controller?

Use L4 31.4 mm maximum reference length as the controlled envelope value in the SMC ASV Series review. For short-stroke cylinder cycling, fit the M5 thread without transferring load into the resin body. Release is appropriate only when the manufacturer value and the project requirement agree.

How should tube outside diameter be written in the purchase record for ASV220F-M5-06 Speed Exhaust Controller?

Tube outside diameter is published as 6 mm for the SMC ASV Series. For compact gripper exhaust, route the 6 mm tube so it does not obstruct the exhaust opening. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SMC ASV Series application review

ASV220F-M5-06 Applications

These contexts use the manufacturer-documented function of ASV220F-M5-06; each requires a separate site-fit decision.

Application contexts

01 · Short-stroke cylinder cyclingApply the documented combined cylinder speed and quick-exhaust control only after confirming actuator port as M5 × 0.8.
02 · Compact gripper exhaustApply the documented combined cylinder speed and quick-exhaust control only after confirming tubing as 6 mm outside diameter.
03 · Assembly fixture motionApply the documented combined cylinder speed and quick-exhaust control only after confirming envelope as L4 31.4 mm maximum reference length.
04 · High-cycle pneumatic toolingApply the documented combined cylinder speed and quick-exhaust control only after confirming tool access as 8 mm hexagon.

Why choose Nordwel

Traceable identityASV220F-M5-06 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to combined cylinder speed and quick-exhaust control, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain ASV220F-M5-06, M5 × 0.8 thread with 6 mm tube connection, and the approved site record as three independent checks.
Need help matching this SMC configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp