other
Products
CM597-ETH AC500 Ethernet Communication Module
CM597-ETH AC500 Ethernet Communication Module
CM597-ETH AC500 Ethernet Communication Module

ABB CM597-ETH AC500 Ethernet Communication Module

EMAIL SALES
ABB official data reviewed
CM597-ETH — AC500 Ethernet Communication Module

ABB lists CM597-ETH in the AC500 communication module portfolio. The reviewed record combines its exact identity with published electrical, channel, connection and installation data.

AC500 communication moduleSwitched industrial Ethernet connectivityExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Exact modelCM597-ETH
Article number1SAP173700R0001
Ethernet ports2
Transfer rate10/100 Mbit/s
Duplex modeFull duplex
ProtocolsTCP/IP, UDP/IP, Modbus TCP
SwitchInternal
Replacement noteRequires project hardware update from CM577-ETH
  • Brand:

    ABB
  • Item NO.:

    CM597-ETH
  • Goods Stock:

    1
  • Part Number:

    CM597-ETH
  • Description:

    CM597-ETH is an ABB ac500 ethernet communication module documented for switched industrial ethernet connectivity. This page retains the complete order identity and manufacturer-published selection data.
CM597-ETH configuration inquiry

Get a precise quote for CM597-ETH

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CM597-ETH official identification

Selection review for CM597-ETH starts with the manufacturer record, then checks the installed interface and application duty as separate approval points.

Operating scopeSwitched industrial Ethernet connectivity
Mating arrangement2 × RJ45 with internal Ethernet switch
Host platformAC500 communication module
Verification sourceABB AC500 V3 Hardware Manual

Engineering and installation checks

  • ABB identifies CM597-ETH as ac500 ethernet communication module.
  • Article number: 1SAP173700R0001.
  • Duplex mode: Full duplex.
  • Manufacturer verification basis: ABB AC500 V3 Hardware Manual.
Official product data

CM597-ETH key specifications

Article number 1SAP173700R0001
Ethernet ports 2
Transfer rate 10/100 Mbit/s
Duplex mode Full duplex
Protocols TCP/IP, UDP/IP, Modbus TCP
Switch Internal
Replacement note Requires project hardware update from CM577-ETH

Source: ABB AC500 V3 Hardware Manual.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Seat CM597-ETH on the documented 2 × rj45 with internal ethernet switch arrangement and inspect every mating contact before power is applied.
  • Record the installed ethernet ports as 2 and preserve the existing terminal or network labels.
  • Check enclosure protection, horizontal or vertical mounting, airflow, temperature and conductor strain against the ABB installation instructions.
  • After energization, verify status indicators, diagnostics and the controlled switched industrial ethernet connectivity test before returning the loop or network to service.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Exact hardware identity
CM597-ETH
Article number
1SAP173700R0001
Transfer rate
10/100 Mbit/s
Installed interface
2 × RJ45 with internal Ethernet switch
Engineering boundary
Match ABB configuration and device revision for switched industrial ethernet connectivity
Final selection: Select CM597-ETH only after the complete article identity, ethernet ports, transfer rate, host hardware and installed wiring have been matched to the approved project record.
Recommended model families

More ABB models

ABB verified models 01ABB CI511-ETHCATABB CI502-PNIOABB CI501-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 02ABB DA502ABB AO561ABB AI562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 03ABB TU532ABB TU531ABB CM577-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 04ABB CI522-MODTCPABB CI521-MODTCPABB CI512-ETHCAT

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Schneider BMXDDO1602Schneider BMENOC0301GE SST-PFB3-VME2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Westinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPE

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Load Cell Central OM-19-2Schneider AP4423ABB 086364-001

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB ACS880-04-330A-7ABB NTR012-AABB NDBU-95 64008366D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB RAI02JABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01ABB DSTA002B 3BSE018317R1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CM597-ETH Order Guide

Use the complete ABB designation and installed hardware record for engineering review.
1Full designationCM597-ETH; do not shorten or append an unverified suffix.
2Documented device classAC500 Ethernet Communication Module
3Primary system roleSwitched industrial Ethernet connectivity
4Article number1SAP173700R0001
5Mating arrangement2 × RJ45 with internal Ethernet switch
6ABB verification recordABB AC500 V3 Hardware Manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

CM597-ETH identity controlReconcile the order code, device label and article number.
Ethernet ports reviewConfirm 2 against the installed load or network.
Connection-file auditPreserve 2 × rj45 with internal ethernet switch drawings and labels.
Commissioning evidenceCapture diagnostics and a controlled switched industrial ethernet connectivity result.

CM597-ETH FAQ

What must a receiving inspection verify on CM597-ETH when article number is 1SAP173700R0001?

Use the complete CM597-ETH designation together with article number 1SAP173700R0001. Reject any record that changes a suffix, article identity or documented device class.

For switched industrial ethernet connectivity, which quotation evidence confirms CM597-ETH with article number 1SAP173700R0001?

Include the nameplate, quantity, installed base or terminal unit, clear connector photographs, destination and the approved drawing that defines 2 × rj45 with internal ethernet switch.

How does the CM597-ETH ac500 ethernet communication module with article number 1SAP173700R0001 serve switched industrial ethernet connectivity?

ABB documents the unit for switched industrial ethernet connectivity. The project must independently confirm that this role matches the existing architecture and controlled cause-and-effect.

Before moving CM597-ETH wiring for switched industrial ethernet connectivity, what must be retained for transfer rate 10/100 Mbit/s?

Document 2 × RJ45 with internal Ethernet switch. Retain terminal numbers, polarity, shielding, grounding, device addresses and cable identifiers exactly as found.

For switched industrial ethernet connectivity, after energizing CM597-ETH, how should duplex mode Full duplex be checked?

Review LEDs and diagnostics, then test the relevant channels or communication path without bypassing site interlocks. File the result with the maintenance record.

Which mounting review supports switched industrial ethernet connectivity for CM597-ETH at article number 1SAP173700R0001?

Allow for the documented mating hardware, conductor bend radius, service access and the ABB environmental limits. Do not infer dimensions from a neighboring module.

Why must protocols TCP/IP, UDP/IP, Modbus TCP stay with CM597-ETH for switched industrial ethernet connectivity approval?

The review must preserve protocols TCP/IP, UDP/IP, Modbus TCP; then validate switch Internal against the field requirement.

Can another ac500 communication module device replace CM597-ETH when article number 1SAP173700R0001 or switch differs?

Compare every published channel, protocol, voltage, current, terminal and lifecycle field. A similar family name is not evidence that the alternative is interchangeable.

At receipt for switched industrial ethernet connectivity, which ethernet ports 2 evidence confirms CM597-ETH?

Inspect the label for CM597-ETH, verify the expected ac500 ethernet communication module, check connector condition and reconcile supplied accessories with the approved purchase record.

Which controlled documents authorize CM597-ETH, article number 1SAP173700R0001, for switched industrial ethernet connectivity?

The approved hardware configuration, I/O or network drawings, protection settings and commissioning procedure must collectively confirm switched industrial ethernet connectivity.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AC500 communication module application review

CM597-ETH Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · CM597-ETH controlled replacementPreserve the complete CM597-ETH identity when replacing an installed unit during a planned outage.
02 · Switched industrial Ethernet connectivity retrofit reviewConfirm that the approved architecture still requires switched industrial ethernet connectivity before changing hardware.
03 · AC500 communication module spare verificationValidate terminal, base, firmware and drawing compatibility for an on-site ac500 communication module spare.
04 · 2 application checkUse the ABB-published ethernet ports value 2 as a selection checkpoint.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify CM597-ETH. Check first: Seat CM597-ETH on the documented 2 × rj45 with internal ethernet switch arrangement and inspect every mating contact before power is applied.
Need help matching this ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp