A sixteen-point output-only MOSFET module for rapid, high-cycle 24 V DC actuation in an expandable S7-200 SMART system.
Brand:
SIEMENSItem NO.:
6ES7288-2QT16-0AA0Part Number:
6ES7288-2QT16-0AA0Weight:
186 gDimensions:
45 × 100 × 81 mmCertification:
CE; IP20Description:
A sixteen-point output-only MOSFET module for rapid, high-cycle 24 V DC actuation in an expandable S7-200 SMART system.Siemens identifies 6ES7288-2QT16-0AA0 as the SIMATIC S7-200 SMART EM QT16 / DQ 16 × 24 V DC Transistor. A sixteen-point output-only MOSFET module for rapid, high-cycle 24 V DC actuation in an expandable S7-200 SMART system.
Published digital and analog input modules for adding field signals.
Sourcing MOSFET options for fast 24 V DC output expansion.
Dry-contact relay options for documented AC and DC field loads.
Published standard S7-200 SMART CPUs that support expansion-module architectures.
Selected ABB control, I/O and measurement products already published on Nordwel.
Selected Honeywell controller, IOTA and Safety Manager products published on Nordwel.
Selected GE turbine-control, communication and I/O products published on Nordwel.
Square D belongs to Schneider Electric; these linked Schneider products are already published on Nordwel.
Selected Bently Nevada 330904 NSv proximity probes with verified Nordwel contact details.
Selected Vibro-Meter proximity and vibration sensor products published on Nordwel.
Selected Bently Nevada 330904 and 330905 NSv proximity probes with verified Nordwel contact details.
Selected Bently Nevada 330905, 330910 and 3500 system products with verified Nordwel contact details.
Use the exact Siemens order number and verify the system constraints before procurement.
Verify every load is suitable for a sourcing 24 V DC MOSFET output.
Hold each common at or below 3 A, including simultaneous operation.
The outputs are not short-circuit protected, so use suitable external fuses.
Reserve sixteen DQ bits; this module does not add input channels.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
It is an output-only S7-200 SMART expansion module with sixteen sourcing transistor outputs.
No. It provides sixteen outputs and zero inputs.
The output field supply must remain within 20.4 to 28.8 V DC.
They are arranged in four groups, with a 3 A maximum current per common.
Each channel is rated 0.75 A and the documented lamp load is 5 W.
No. Its outputs are 24 V DC transistors; use a compatible interface or relay-output module for AC loads.
No. Siemens lists no short-circuit protection for these outputs.
Power consumption is 1.7 W and dimensions are 45 × 100 × 81 mm; listed weight is 186 g.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :