A SIMATIC S7-200 SMART G2 expansion module identified in the Siemens G2 system manual as EM AT08 with eight 16-bit thermocouple inputs.
Brand:
SIEMENSItem NO.:
6ES7288-3AT08-0AA1Part Number:
6ES7288-3AT08-0AA1Weight:
See Siemens project dataDimensions:
15 × 118 mm front dimensionsCertification:
Siemens EMC, RoHS and UK conformity recordsDescription:
A SIMATIC S7-200 SMART G2 expansion module identified in the Siemens G2 system manual as EM AT08 with eight 16-bit thermocouple inputs.Siemens identifies 6ES7288-3AT08-0AA1 as EM AT08 thermocouple input module. A SIMATIC S7-200 SMART G2 expansion module identified in the Siemens G2 system manual as EM AT08 with eight 16-bit thermocouple inputs.
Verified SIMATIC S7-200 SMART analog-input and temperature-measurement options.
Verified analog, signal-board and compact I/O choices for S7-200 SMART systems.
Published communication and digital signal-board options with verified contact details.
Expandable S7-200 SMART CPU hosts and compatible compact control choices.
Verified Siemens analog-input, analog-output and temperature-measurement modules.
Verified S7-200 SMART CPUs, communication boards and compact digital I/O.
Published 8 mm and NSv proximity probe configurations.
Verified 5 mm, 11 mm, 25 mm, 50 mm and ceramic-capped probe options.
Verified probe housings, mounting studs and system cable accessories.
Published velocity, thrust, speed and vibration-sensing products.
Verified protection relays, controllers and machinery-monitoring products.
Additional verified automation, monitoring and I/O products published on Nordwel.
Use the exact manufacturer order number and verify the system constraints before procurement.
Use 6ES7288-3AT08-0AA1; the official G2 table does not list the requested 0AA0 suffix.
Map all eight thermocouple inputs and the required supported sensor types.
Check the exact S7-200 SMART G2 CPU and total expansion-module count.
Plan the project in STEP 7 Micro/WIN SMART V3.1 as specified for G2 support.
Allow 15 mm mounting width and 118 mm mounting height.
Use the current Siemens declaration for the destination-market compliance review.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
It is the SIMATIC S7-200 SMART G2 EM AT08 expansion module with eight 16-bit thermocouple inputs.
The Siemens G2 system manual lists 6ES7288-3AT08-0AA1.
The exact module description specifies eight thermocouple inputs.
The G2 manual identifies the module as TC 8 × 16 bit.
Siemens states that STEP 7 Micro/WIN SMART V3.1 fully supports G2 modules and migration.
The mounting face is listed as 15 mm wide and 118 mm high.
No. The exact G2 host CPU, expansion count and project version must be verified.
Yes. Siemens lists it in the 2025 EMC, RoHS, UK EMC and UK RoHS declaration set.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :