other
Products
HFZ25 Parallel Ball-Bearing Air Gripper
HFZ25 Parallel Ball-Bearing Air Gripper
HFZ25 Parallel Ball-Bearing Air Gripper

AirTAC HFZ25 Parallel Ball-Bearing Air Gripper

EMAIL SALES
AirTAC official data reviewed
HFZ25 — Parallel Ball-Bearing Air Gripper

A size-25 HFZ parallel air gripper using a ball-bearing guide and a compact body with an M5 pneumatic connection.

AirTAC HFZ SeriesTwo-jaw parallel pneumatic grippingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerAirTAC
Documented familyAirTAC HFZ Series
Product formParallel Ball-Bearing Air Gripper
Primary functionTwo-jaw parallel pneumatic gripping
SeriesHFZ
Bore size25 mm
Motion styleParallel
Guide typeBall bearing
  • Brand:

    Others
  • Item NO.:

    HFZ25
  • Goods Stock:

    1
  • Part Number:

    HFZ25
  • Description:

    A size-25 HFZ parallel air gripper using a ball-bearing guide and a compact body with an M5 pneumatic connection.
HFZ25 configuration inquiry

Get a precise quote for HFZ25

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

HFZ25 official identification

A size-25 HFZ parallel air gripper using a ball-bearing guide and a compact body with an M5 pneumatic connection.

System roleTwo-jaw parallel pneumatic gripping
Connection boundaryM5 × 0.8 pneumatic port
Selection focusMatch bore size, jaw envelope, port thread and required external tooling.
Release evidenceBody dimension check, jaw alignment, pressure leak test and grip-retention trial

Engineering and installation checks

  • undefined
  • Reserve the published 103 mm overall envelope and jaw-motion space.
  • Manufacturer verification basis: AirTAC HFZ Series Air Gripper official catalog.
Official product data

HFZ25 key specifications

Series HFZ
Bore size 25 mm
Motion style Parallel
Guide type Ball bearing
Overall length A 103 mm
Body length reference 64 mm
Body width B 33.5 mm
Dimension C 71 mm
Dimension CA 52 mm
Port thread M5 × 0.8
Dimension DA 10 mm
Dimension DB 25 mm

Source: AirTAC HFZ Series Air Gripper official catalog.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of HFZ25.

  • Reserve the published 103 mm overall envelope and jaw-motion space.
  • Connect the M5 × 0.8 ports without loading the body.
  • Align custom fingers symmetrically to the parallel jaw travel.
  • Verify gripping stability with the actual center of gravity and acceleration.
Record the as-found condition and the final body dimension check, jaw alignment, pressure leak test and grip-retention trial
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for HFZ25 before purchase approval.

Nominal size
25 mm bore class
Jaw motion
Parallel closing and opening
Guide construction
Ball bearing
Pneumatic port
M5 × 0.8
Fixture envelope
Dimensions checked against the HFZ25 drawing
Final selection: Use only the values published for HFZ25 in AirTAC HFZ Series Air Gripper official catalog; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

AirTAC verified models 01ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

AirTAC verified models 0220F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

AirTAC verified models 036ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

AirTAC verified models 046ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7551-1AB00-0AB06ES7553-1AA00-0AB06ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

HFZ25 Order Guide

Use the complete AirTAC designation and installed hardware record for engineering review.
1Ordering identityHFZ25
2Official evidenceAirTAC HFZ Series Air Gripper official catalog
3Installation surveyConnect the M5 × 0.8 ports without loading the body.
4Compatibility gate25 mm bore class
5Commissioning recordBody dimension check, jaw alignment, pressure leak test and grip-retention trial
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact HFZ25 source record named on this page.
Interface reviewM5 × 0.8 pneumatic port
Receiving checkMatch bore size, jaw envelope, port thread and required external tooling.
Release packageBody dimension check, jaw alignment, pressure leak test and grip-retention trial

HFZ25 FAQ

What receiving evidence is required for the port thread stated for HFZ25 Parallel Ball-Bearing Air Gripper?

For this two-jaw parallel pneumatic gripping selection, port thread is M5 × 0.8. For robotic component gripping, reserve the published 103 mm overall envelope and jaw-motion space. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

How is nominal size separated from site-specific assumptions for HFZ25 Parallel Ball-Bearing Air Gripper?

Use 25 mm bore class as the controlled nominal size value in the AirTAC HFZ Series review. For transfer station handling, connect the M5 × 0.8 ports without loading the body. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

How should pneumatic port be written in the purchase record for HFZ25 Parallel Ball-Bearing Air Gripper?

Pneumatic port is published as M5 × 0.8 for the AirTAC HFZ Series. For machine tending fingers, align custom fingers symmetrically to the parallel jaw travel. Log the comparison against the controlled parts list before the item enters the cabinet.

What field observation validates bore size for HFZ25 Parallel Ball-Bearing Air Gripper?

The official HFZ25 record gives bore size as 25 mm for its parallel ball-bearing air gripper function. For parallel inspection fixture, verify gripping stability with the actual center of gravity and acceleration. Check the mating device, protective hardware and configured function before energization.

What fault could result from misreading overall length a on HFZ25 Parallel Ball-Bearing Air Gripper?

For this two-jaw parallel pneumatic gripping selection, overall length a is 103 mm. For robotic component gripping, reserve the published 103 mm overall envelope and jaw-motion space. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

What photograph or measurement proves dimension c on received HFZ25 Parallel Ball-Bearing Air Gripper?

Use 71 mm as the controlled dimension c value in the AirTAC HFZ Series review. For transfer station handling, connect the M5 × 0.8 ports without loading the body. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which dimension da value identifies the reviewed HFZ25 Parallel Ball-Bearing Air Gripper configuration?

Dimension DA is published as 10 mm for the AirTAC HFZ Series. For machine tending fingers, align custom fingers symmetrically to the parallel jaw travel. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

Why does jaw motion matter when selecting HFZ25 Parallel Ball-Bearing Air Gripper?

The official HFZ25 record gives jaw motion as Parallel closing and opening for its parallel ball-bearing air gripper function. For parallel inspection fixture, verify gripping stability with the actual center of gravity and acceleration. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

Which mismatch involving fixture envelope should stop approval of HFZ25 Parallel Ball-Bearing Air Gripper?

For this two-jaw parallel pneumatic gripping selection, fixture envelope is Dimensions checked against the HFZ25 drawing. For robotic component gripping, reserve the published 103 mm overall envelope and jaw-motion space. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What maintenance record preserves the motion style evidence for HFZ25 Parallel Ball-Bearing Air Gripper?

Use Parallel as the controlled motion style value in the AirTAC HFZ Series review. For transfer station handling, connect the M5 × 0.8 ports without loading the body. Release is appropriate only when the manufacturer value and the project requirement agree.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AirTAC HFZ Series application review

HFZ25 Applications

These contexts use the manufacturer-documented function of HFZ25; each requires a separate site-fit decision.

Application contexts

01 · Robotic component grippingApply the documented two-jaw parallel pneumatic gripping only after confirming nominal size as 25 mm bore class.
02 · Transfer station handlingApply the documented two-jaw parallel pneumatic gripping only after confirming jaw motion as Parallel closing and opening.
03 · Machine tending fingersApply the documented two-jaw parallel pneumatic gripping only after confirming guide construction as Ball bearing.
04 · Parallel inspection fixtureApply the documented two-jaw parallel pneumatic gripping only after confirming pneumatic port as M5 × 0.8.

Why choose Nordwel

Traceable identityHFZ25 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to two-jaw parallel pneumatic gripping, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain HFZ25, M5 × 0.8 pneumatic port, and the approved site record as three independent checks.
Need help matching this AirTAC configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp