other
Products
VE4036P2 Redundant M-series Two-Port Serial Interface Assembly
VE4036P2 Redundant M-series Two-Port Serial Interface Assembly
VE4036P2 Redundant M-series Two-Port Serial Interface Assembly

Emerson VE4036P2 Redundant M-series Two-Port Serial Interface Assembly

EMAIL SALES
Emerson official data reviewed
VE4036P2 — Redundant M-series Two-Port Serial Interface Assembly

A redundant serial interface assembly containing two cards and a redundant terminal block, with Modbus software installed.

DeltaV M-series serial interfacesRedundant serial-device integrationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series serial interfaces
Product formRedundant M-series Two-Port Serial Interface Assembly
Primary functionRedundant serial-device integration
AssemblyTwo interface cards plus redundant terminal block
Ports per card2
Datasets per card32
Datasets per port16
  • Brand:

    Emerson
  • Item NO.:

    VE4036P2
  • Goods Stock:

    1
  • Part Number:

    VE4036P2
  • Description:

    A redundant serial interface assembly containing two cards and a redundant terminal block, with Modbus software installed.
VE4036P2 configuration inquiry

Get a precise quote for VE4036P2

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

VE4036P2 official identification

A redundant serial interface assembly containing two cards and a redundant terminal block, with Modbus software installed.

System roleRedundant serial-device integration
Connection boundaryTwo isolated RS232 or RS422/485 ports per card
Selection focusConfirm redundant terminal block, port electrical modes, baud settings and connected-device redundancy behavior.
Release evidenceAssembly code, card/terminal inventory, dataset map and failover test

Engineering and installation checks

  • undefined
  • Identify active and standby serial cables before disconnecting the terminal block.
  • Manufacturer verification basis: Emerson M-series Serial Interface Series 2 product data sheet.
Official product data

VE4036P2 key specifications

Assembly Two interface cards plus redundant terminal block
Ports per card 2
Datasets per card 32
Datasets per port 16
Port standards RS232 or RS422/485
Baud range 300–115200
Parity Even, odd or none
Data bits 7 or 8
Stop bits 1 or 2
Protection IP20

Source: Emerson M-series Serial Interface Series 2 product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of VE4036P2.

  • Identify active and standby serial cables before disconnecting the terminal block.
  • Ground each isolated port as required by the installation design.
  • Restore per-port electrical mode, baud, framing and timeout values.
  • Test automatic transfer using an approved non-destructive fault scenario.
Record the as-found condition and the final assembly code, card/terminal inventory, dataset map and failover test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for VE4036P2 before purchase approval.

Redundancy
Two-card assembly with redundant terminal block
Serial electrical mode
RS232 or RS422/485
Dataset capacity
32 per card, 16 per port
Connected device
Must support the intended redundant serial arrangement
System boundary
M-series carrier and compatible control release
Final selection: Use only the values published for VE4036P2 in Emerson M-series Serial Interface Series 2 product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson IC086SLM082Emerson KJ4001X1-NA1 12P3373X022Emerson 960177-02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson PR6423/000-010 CON021Emerson KJ3241X1-BA1 12P2506X042Emerson A6210

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson KJ3002X1-BG2 12P1731X082 VE4003S5B1Emerson WH5D-2FF 1X00416H03Emerson A6510 A6510-T

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson A6120Emerson KJ3222X1-BA1 12P2532X122 VE4003S2B2Emerson KJ2101X1-BA1 12P2690X012

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0520F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7551-1AB00-0AB06ES7553-1AA00-0AB06ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

VE4036P2 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityVE4036P2
2Official evidenceEmerson M-series Serial Interface Series 2 product data sheet
3Installation surveyGround each isolated port as required by the installation design.
4Compatibility gateTwo-card assembly with redundant terminal block
5Commissioning recordAssembly code, card/terminal inventory, dataset map and failover test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact VE4036P2 source record named on this page.
Interface reviewTwo isolated RS232 or RS422/485 ports per card
Receiving checkConfirm redundant terminal block, port electrical modes, baud settings and connected-device redundancy behavior.
Release packageAssembly code, card/terminal inventory, dataset map and failover test

VE4036P2 FAQ

What photograph or measurement proves serial electrical mode on received VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

Use RS232 or RS422/485 as the controlled serial electrical mode value in the DeltaV M-series serial interfaces review. For redundant modbus link, identify active and standby serial cables before disconnecting the terminal block. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which system boundary value identifies the reviewed VE4036P2 Redundant M-series Two-Port Serial Interface Assembly configuration?

System boundary is published as M-series carrier and compatible control release for the DeltaV M-series serial interfaces. For serial analyzer integration, ground each isolated port as required by the installation design. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

Why does datasets per card matter when selecting VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

The official VE4036P2 record gives datasets per card as 32 for its redundant m-series two-port serial interface assembly function. For package-unit communications, restore per-port electrical mode, baud, framing and timeout values. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

Which mismatch involving baud range should stop approval of VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

For this redundant serial-device integration selection, baud range is 300–115200. For high-availability legacy interface, test automatic transfer using an approved non-destructive fault scenario. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What maintenance record preserves the stop bits evidence for VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

Use 1 or 2 as the controlled stop bits value in the DeltaV M-series serial interfaces review. For redundant modbus link, identify active and standby serial cables before disconnecting the terminal block. Release is appropriate only when the manufacturer value and the project requirement agree.

How does serial electrical mode limit a proposed VE4036P2 Redundant M-series Two-Port Serial Interface Assembly substitute?

Serial electrical mode is published as RS232 or RS422/485 for the DeltaV M-series serial interfaces. For serial analyzer integration, ground each isolated port as required by the installation design. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test VE4036P2 Redundant M-series Two-Port Serial Interface Assembly without exceeding the stated system boundary?

The official VE4036P2 record gives system boundary as M-series carrier and compatible control release for its redundant m-series two-port serial interface assembly function. For package-unit communications, restore per-port electrical mode, baud, framing and timeout values. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the VE4036P2 Redundant M-series Two-Port Serial Interface Assembly datasets per card entry be released for quotation?

For this redundant serial-device integration selection, datasets per card is 32. For high-availability legacy interface, test automatic transfer using an approved non-destructive fault scenario. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify baud range before fitting VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

Use 300–115200 as the controlled baud range value in the DeltaV M-series serial interfaces review. For redundant modbus link, identify active and standby serial cables before disconnecting the terminal block. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by stop bits on VE4036P2 Redundant M-series Two-Port Serial Interface Assembly?

Stop bits is published as 1 or 2 for the DeltaV M-series serial interfaces. For serial analyzer integration, ground each isolated port as required by the installation design. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series serial interfaces application review

VE4036P2 Applications

These contexts use the manufacturer-documented function of VE4036P2; each requires a separate site-fit decision.

Application contexts

01 · Redundant Modbus linkApply the documented redundant serial-device integration only after confirming redundancy as Two-card assembly with redundant terminal block.
02 · Serial analyzer integrationApply the documented redundant serial-device integration only after confirming serial electrical mode as RS232 or RS422/485.
03 · Package-unit communicationsApply the documented redundant serial-device integration only after confirming dataset capacity as 32 per card, 16 per port.
04 · High-availability legacy interfaceApply the documented redundant serial-device integration only after confirming connected device as Must support the intended redundant serial arrangement.

Why choose Nordwel

Traceable identityVE4036P2 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to redundant serial-device integration, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain VE4036P2, Two isolated RS232 or RS422/485 ports per card, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp