other
Products
TK-IAH061 Six-Point Analog Input Module
TK-IAH061 Six-Point Analog Input Module
TK-IAH061 Six-Point Analog Input Module

Honeywell TK-IAH061 Six-Point Analog Input Module

EMAIL SALES
Honeywell official data reviewed
TK-IAH061 — Six-Point Analog Input Module

TK-IAH061 is the Honeywell-listed coated six-point analog input module for 4–20 mA and 10 V signal types.

Honeywell Legacy Process I/OSix-channel current or voltage signal acquisitionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerHoneywell
Documented familyHoneywell Legacy Process I/O
Product formSix-Point Analog Input Module
Primary functionSix-channel current or voltage signal acquisition
Exact designationTK-IAH061
Input points6
Current input4–20 mA
Voltage input10 V
  • Brand:

    Honeywell
  • Item NO.:

    TK-IAH061
  • Goods Stock:

    1
  • Part Number:

    TK-IAH061
  • Description:

    TK-IAH061 is the Honeywell-listed coated six-point analog input module for 4–20 mA and 10 V signal types.
TK-IAH061 configuration inquiry

Get a precise quote for TK-IAH061

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

TK-IAH061 official identification

TK-IAH061 is the Honeywell-listed coated six-point analog input module for 4–20 mA and 10 V signal types.

System roleSix-channel current or voltage signal acquisition
Connection boundary6 analog inputs accepting 4–20 mA or 10 V signals
Selection focusIdentify each channel as 4–20 mA or 10 V, then confirm scaling, polarity, coating requirement and terminal assignment.
Release evidenceTK-IAH061 marking, channel signal-class table, scaling record, injected-value test and displayed-result capture

Engineering and installation checks

  • undefined
  • Classify every field signal as current or voltage before disconnecting it.
  • Manufacturer verification basis: Honeywell November 2020 System HINTS — legacy module identification.
Official product data

TK-IAH061 key specifications

Exact designation TK-IAH061
Input points 6
Current input 4–20 mA
Voltage input 10 V
Conformal coating Yes
Signal direction Analog input

Source: Honeywell November 2020 System HINTS — legacy module identification.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of TK-IAH061.

  • Classify every field signal as current or voltage before disconnecting it.
  • Preserve polarity and shield treatment for the six individual input circuits.
  • Check the coated assembly for handling damage before connector engagement.
  • Apply a safe reference value appropriate to each configured signal type and record the displayed measurement.
Record the as-found condition and the final tk-iah061 marking, channel signal-class table, scaling record, injected-value test and displayed-result capture
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for TK-IAH061 before purchase approval.

Input count
6
Current mode
4–20 mA
Voltage mode
10 V
Channel configuration
Match the installed signal class
Environmental option
Coated module
Final selection: Use only the values published for TK-IAH061 in Honeywell November 2020 System HINTS — legacy module identification; site suitability remains an engineering decision.
Recommended model families

More Honeywell models

Honeywell verified models 01Honeywell CC-TSP411 51306669-175Honeywell FC-TCNT11 51307928-176Honeywell 10014/I/F

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 02Honeywell FC-IOTA-NR24 51306507-175Honeywell FC-SCNTO2Honeywell FC-TSDO-04UNI

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 03Honeywell FS-TSDO-04UNIHoneywell FS-TSDO-0824Honeywell FS-TSRO-0824

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 04Honeywell FS-TSAI-1620MHoneywell FS-TSGAS-1624Honeywell FS-IOBUS-CPIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB 3BHE015619R0001 XVD825A01ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Schneider BMXDDO1602Schneider BMENOC0301GE SST-PFB3-VME2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Westinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPE

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Load Cell Central OM-19-2Schneider AP4423ABB 086364-001

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB ACS880-04-330A-7ABB NTR012-AABB NDBU-95 64008366D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

TK-IAH061 Order Guide

Use the complete Honeywell designation and installed hardware record for engineering review.
1Ordering identityTK-IAH061
2Official evidenceHoneywell November 2020 System HINTS — legacy module identification
3Installation surveyPreserve polarity and shield treatment for the six individual input circuits.
4Compatibility gate6
5Commissioning recordTK-IAH061 marking, channel signal-class table, scaling record, injected-value test and displayed-result capture
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact TK-IAH061 source record named on this page.
Interface review6 analog inputs accepting 4–20 mA or 10 V signals
Receiving checkIdentify each channel as 4–20 mA or 10 V, then confirm scaling, polarity, coating requirement and terminal assignment.
Release packageTK-IAH061 marking, channel signal-class table, scaling record, injected-value test and displayed-result capture

TK-IAH061 FAQ

At which review gate should TK-IAH061 Six-Point Analog Input Module environmental option be challenged in the mixed-signal input scaling record?

For this six-channel current or voltage signal acquisition selection, environmental option is Coated module. For mixed current-voltage monitoring, classify every field signal as current or voltage before disconnecting it. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence. File this as mixed-signal input scaling checkpoint 1; do not reuse the result for another model or channel group.

Which drawing or schedule should carry the TK-IAH061 Six-Point Analog Input Module current input record in the mixed-signal input scaling record?

Use 4–20 mA as the controlled current input value in the Honeywell Legacy Process I/O review. For six-loop input replacement, preserve polarity and shield treatment for the six individual input circuits. Mark the evidence source and revision so future reviewers can reproduce the decision. File this as mixed-signal input scaling checkpoint 2; do not reuse the result for another model or channel group.

Which companion item must agree with signal direction for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

Signal direction is published as Analog input for the Honeywell Legacy Process I/O. For signal-class migration audit, check the coated assembly for handling damage before connector engagement. Any mismatch requires an engineering disposition rather than an undocumented field adaptation. File this as mixed-signal input scaling checkpoint 3; do not reuse the result for another model or channel group.

How should a discrepancy in voltage mode be closed for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

The official TK-IAH061 record gives voltage mode as 10 V for its six-point analog input module function. For coated measurement cabinet, apply a safe reference value appropriate to each configured signal type and record the displayed measurement. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request. File this as mixed-signal input scaling checkpoint 4; do not reuse the result for another model or channel group.

What receiving evidence is required for the exact designation stated for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

For this six-channel current or voltage signal acquisition selection, exact designation is TK-IAH061. For mixed current-voltage monitoring, classify every field signal as current or voltage before disconnecting it. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification. File this as mixed-signal input scaling checkpoint 5; do not reuse the result for another model or channel group.

How is voltage input separated from site-specific assumptions for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

Use 10 V as the controlled voltage input value in the Honeywell Legacy Process I/O review. For six-loop input replacement, preserve polarity and shield treatment for the six individual input circuits. The commissioning sheet should name the instrument, method, acceptance limit and approving person. File this as mixed-signal input scaling checkpoint 6; do not reuse the result for another model or channel group.

How should input count be written in the purchase record for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

Input count is published as 6 for the Honeywell Legacy Process I/O. For signal-class migration audit, check the coated assembly for handling damage before connector engagement. Use the value as a selection boundary, not as a prediction of site performance. File this as mixed-signal input scaling checkpoint 7; do not reuse the result for another model or channel group.

What field observation validates channel configuration for TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

The official TK-IAH061 record gives channel configuration as Match the installed signal class for its six-point analog input module function. For coated measurement cabinet, apply a safe reference value appropriate to each configured signal type and record the displayed measurement. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics. File this as mixed-signal input scaling checkpoint 8; do not reuse the result for another model or channel group.

What fault could result from misreading input points on TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

For this six-channel current or voltage signal acquisition selection, input points is 6. For mixed current-voltage monitoring, classify every field signal as current or voltage before disconnecting it. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items. File this as mixed-signal input scaling checkpoint 9; do not reuse the result for another model or channel group.

What photograph or measurement proves conformal coating on received TK-IAH061 Six-Point Analog Input Module in the mixed-signal input scaling record?

Use Yes as the controlled conformal coating value in the Honeywell Legacy Process I/O review. For six-loop input replacement, preserve polarity and shield treatment for the six individual input circuits. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement. File this as mixed-signal input scaling checkpoint 10; do not reuse the result for another model or channel group.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Honeywell Legacy Process I/O application review

TK-IAH061 Applications

These contexts use the manufacturer-documented function of TK-IAH061; each requires a separate site-fit decision.

Application contexts

01 · Mixed current-voltage monitoringApply the documented six-channel current or voltage signal acquisition only after confirming input count as 6.
02 · Six-loop input replacementApply the documented six-channel current or voltage signal acquisition only after confirming current mode as 4–20 mA.
03 · Signal-class migration auditApply the documented six-channel current or voltage signal acquisition only after confirming voltage mode as 10 V.
04 · Coated measurement cabinetApply the documented six-channel current or voltage signal acquisition only after confirming channel configuration as Match the installed signal class.

Why choose Nordwel

Traceable identityTK-IAH061 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to six-channel current or voltage signal acquisition, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain TK-IAH061, 6 analog inputs accepting 4–20 mA or 10 V signals, and the approved site record as three independent checks.
Need help matching this Honeywell configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp