other
Products
DS200LDCCH1AKA Drive Control and LAN Communications Board
DS200LDCCH1AKA Drive Control and LAN Communications Board
DS200LDCCH1AKA Drive Control and LAN Communications Board

GE DS200LDCCH1AKA Drive Control and LAN Communications Board

EMAIL SALES
GE official data reviewed
DS200LDCCH1AKA — Drive Control and LAN Communications Board

GEI-100216 identifies the LDCC as the drive-control and LAN-communications board used with documented legacy drive and exciter systems.

DS200 LDCC control boardsDrive processing, motor control and local-network communicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyDS200 LDCC control boards
Exact modelDS200LDCCH1AKA
Verified functionDrive processing, motor control and local-network communication
Manufacturer sourceGeneral Electric GEI-100216 Drive Control/LAN Communications Board manual
Functional acronymLDCC
Selection basisConfirm the H1AKA revision, host cabinet, installed PROM set, LAN connections, operator interface and configuration archive.
  • Brand:

    General Electric
  • Item NO.:

    DS200LDCCH1AKA
  • Goods Stock:

    1
  • Part Number:

    DS200LDCCH1AKA
  • Description:

    GEI-100216 identifies the LDCC as the drive-control and LAN-communications board used with documented legacy drive and exciter systems.
DS200LDCCH1AKA configuration inquiry

Get a precise quote for DS200LDCCH1AKA

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DS200LDCCH1AKA official identification

GEI-100216 identifies the LDCC as the drive-control and LAN-communications board used with documented legacy drive and exciter systems.

System responsibilityDrive processing, motor control and local-network communication
Connection boundaryInternal drive, operator-interface and LAN connections defined by the host cabinet
Procurement decisionConfirm the H1AKA revision, host cabinet, installed PROM set, LAN connections, operator interface and configuration archive.
Acceptance recordExact label, GEI-100216 comparison, PROM inventory, cable map, LAN diagnostic and controlled drive test

Engineering and installation checks

  • Retain DS200LDCCH1AKA as the controlling inquiry identity.
  • Capture the PROM labels and all cable positions before removing the board.
  • Use only facts traceable to General Electric GEI-100216 Drive Control/LAN Communications Board manual.
Official product data

DS200LDCCH1AKA key specifications

Exact model DS200LDCCH1AKA
Functional acronym LDCC
Manufacturer publication GEI-100216
Primary role Drive control and LAN communications
Documented host family DIRECTO-MATIC 2000 drives and exciters
First functional revision A
Second functional revision K
Artwork revision A

Source: General Electric GEI-100216 Drive Control/LAN Communications Board manual.

Pre-order check 01

Installation environment

Prepare DS200LDCCH1AKA by recording the installed connections, configuration and complete nameplate.

  • Capture the PROM labels and all cable positions before removing the board.
  • Use ESD controls and keep the board orientation recorded.
  • Restore project configuration and LAN addressing from the controlled archive.
  • Verify operator access, communications and drive response in separate tests.
Close the work with exact label, GEI-100216 comparison, PROM inventory, cable map, LAN diagnostic and controlled drive test.
Pre-order check 02

Compatibility confirmation

Approve DS200LDCCH1AKA only when its documented function and every listed boundary agree with the installed design.

Functional board
LDCC
Exact identity
DS200LDCCH1AKA
Host equipment
Documented compatible drive or exciter cabinet
Firmware set
Installed PROM versions matched
Communications
Original LAN and operator-interface paths
Final selection: The exact H1AKA identity is preserved. Firmware contents, field ratings and interchangeability with nearby LDCC revisions are not inferred.
Recommended model families

Verified Industrial Models

Tiffany verified models 01ABB CI541-DPABB CI542-DPABB CI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CM5640-2ETHABB CM582-DPABB CM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CM589-PNIOABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB DO526ABB DO572ABB PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ED1052-1MD08-0BA2Siemens 6ED1052-1FB08-0BA2Siemens 6ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6ES7414-3FM07-0AB0Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7654-7HC00-0XA0ABB AI563ABB AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CD522ABB PM5072-T-2ETHABB PM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Yokogawa ATSA3S-0Yokogawa ATSS3D-0Industrial 20F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Industrial 20F11RC015JA0NNNNNSiemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6ES7414-2XG02-0AB0Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES7515-2AN03-0AB0Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DS200LDCCH1AKA Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityDS200LDCCH1AKA
2Manufacturer evidenceGeneral Electric GEI-100216 Drive Control/LAN Communications Board manual
3Installed conditionUse ESD controls and keep the board orientation recorded.
4Compatibility gateFunctional board: LDCC
5Commissioning proofExact label, GEI-100216 comparison, PROM inventory, cable map, LAN diagnostic and controlled drive test
6Release decisionConfirm the H1AKA revision, host cabinet, installed PROM set, LAN connections, operator interface and configuration archive.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Exact-code review, sourcing, receiving and controlled release support for DS200LDCCH1AKA.

Support scope

Exact model checkDS200LDCCH1AKA is matched to the received unit.
Exact identity reviewDS200LDCCH1AKA
Manufacturer publication evidenceGEI-100216
Acceptance packageExact label, GEI-100216 comparison, PROM inventory, cable map, LAN diagnostic and controlled drive test

DS200LDCCH1AKA FAQ

Which equipment family should be checked before installing DS200LDCCH1AKA?

Confirm the exact host drive or exciter and its approved LDCC parts list. Family resemblance alone does not establish cabinet compatibility.

Why are the installed PROM markings important on an LDCC board?

They carry revision-sensitive configuration or operating content. Inventory every device and compare it with the controlled spare record before startup.

What does the AKA revision string contribute to the purchase identity?

It distinguishes functional and artwork revisions associated with this board. Retain the full DS200LDCCH1AKA code in quotation and receiving records.

How should LAN compatibility be verified after replacement?

Restore the recorded connections and settings, then prove the intended communication path and diagnostics separately from motor-control operation.

Which manufacturer document is the primary board reference?

Use General Electric publication GEI-100216 for the Drive Control/LAN Communications Board, together with the site-specific cabinet documentation.

Can a different LDCC revision be fitted because it uses the same acronym?

Not without engineering approval. Firmware, hardware revision and host configuration can differ even when the functional acronym is identical.

What operator-interface check belongs in commissioning?

Confirm that the approved operator path communicates, displays expected status and does not report unresolved board or network diagnostics.

How should the board be protected while it is outside the rack?

Use controlled ESD handling, support the assembly by its edges and protect connectors and programmed devices from contact or contamination.

Which tests should be separated during return to service?

Verify board power and diagnostics, LAN communication, operator access and drive response in staged steps so a fault can be isolated.

What should the quotation package show for a configured LDCC spare?

Provide both sides of the label, PROM markings, host cabinet, slot, connector photos, quantity and the required revision acceptance criteria.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DS200 LDCC control boards application review

DS200LDCCH1AKA Applications

These applications use DS200LDCCH1AKA for drive processing, motor control and local-network communication; final suitability depends on the controlled site record.

Application contexts

01 · Legacy drive-control repairApply the documented drive processing, motor control and local-network communication only after confirming functional board as LDCC.
02 · Exciter communications serviceApply the documented drive processing, motor control and local-network communication only after confirming exact identity as DS200LDCCH1AKA.
03 · Operator-interface path restorationApply the documented drive processing, motor control and local-network communication only after confirming host equipment as Documented compatible drive or exciter cabinet.
04 · Configured LDCC spare preparationApply the documented drive processing, motor control and local-network communication only after confirming firmware set as Installed PROM versions matched.

Why choose Nordwel

Exact model traceabilityDS200LDCCH1AKA remains tied to DS200LDCCH1AKA.
Functional acronym boundaryLDCC
Host equipment controlDocumented compatible drive or exciter cabinet
Coordinated releaseTiffany manages evidence, quotation and exact label, gei-100216 comparison, prom inventory, cable map, lan diagnostic and controlled drive test.
Keep functional board, firmware set and final acceptance as separate decisions.
Need Tiffany to verify the DS200LDCCH1AKA evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp