other
Products
NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway
NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway
NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway

Hilscher NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway

EMAIL SALES
Hilscher official data reviewed
NT100-RE-DN — netTAP 100 Real-Time Ethernet to DeviceNet Gateway

A netTAP 100 gateway with loadable firmware, DeviceNet master capability and sub-10 ms I/O conversion.

Hilscher netTAP 100 gatewaysProtocol conversion between industrial Ethernet and DeviceNetExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerHilscher
Documented familyHilscher netTAP 100 gateways
Product formnetTAP 100 Real-Time Ethernet to DeviceNet Gateway
Primary functionProtocol conversion between industrial Ethernet and DeviceNet
Part number1712.170
Ethernet interface10/100BASE-T, isolated
Ethernet connectors2 RJ45
DeviceNet interfaceISO 11898, optically isolated
  • Brand:

    Others
  • Item NO.:

    NT100-RE-DN
  • Goods Stock:

    1
  • Part Number:

    NT100-RE-DN
  • Description:

    A netTAP 100 gateway with loadable firmware, DeviceNet master capability and sub-10 ms I/O conversion.
NT100-RE-DN configuration inquiry

Get a precise quote for NT100-RE-DN

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

NT100-RE-DN official identification

A netTAP 100 gateway with loadable firmware, DeviceNet master capability and sub-10 ms I/O conversion.

System roleProtocol conversion between industrial Ethernet and DeviceNet
Connection boundaryTwo Ethernet ports, five-pin DeviceNet connector and USB diagnostics
Selection focusConfirm licensed protocol pair, master/slave counts, memory-card strategy and network connector wiring.
Release evidencePart number, firmware/license inventory, node map and end-to-end I/O update test

Engineering and installation checks

  • undefined
  • Wire the isolated DeviceNet trunk to the documented five-pin connector.
  • Manufacturer verification basis: Hilscher NT 100-RE-DN official product record.
Official product data

NT100-RE-DN key specifications

Part number 1712.170
Ethernet interface 10/100BASE-T, isolated
Ethernet connectors 2 RJ45
DeviceNet interface ISO 11898, optically isolated
DeviceNet connector 5-pin COMBICON
DeviceNet master capacity Up to 63 slaves
Conversion period Less than 10 ms
Supply 24 VDC ±6 V
Typical current 130 mA at 24 V
Typical power 3.2 W

Source: Hilscher NT 100-RE-DN official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of NT100-RE-DN.

  • Wire the isolated DeviceNet trunk to the documented five-pin connector.
  • Keep the two Ethernet-port roles consistent with the selected firmware conversion.
  • Back up configuration and license information before exchanging the gateway.
  • Use USB diagnostics to verify both networks before releasing mapped I/O.
Record the as-found condition and the final part number, firmware/license inventory, node map and end-to-end i/o update test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for NT100-RE-DN before purchase approval.

Order number
NT 100-RE-DN / 1712.170
Fieldbus side
DeviceNet
Ethernet side
Supported loadable real-time Ethernet protocol
Power input
24 VDC ±6 V
Node capacity
Up to 63 DeviceNet slaves in master use
Final selection: Use only the values published for NT100-RE-DN in Hilscher NT 100-RE-DN official product record; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Hilscher verified models 016ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hilscher verified models 02AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hilscher verified models 03CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hilscher verified models 04CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7521-7EH00-0AB06ES7414-3FM07-0AB06ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

NT100-RE-DN Order Guide

Use the complete Hilscher designation and installed hardware record for engineering review.
1Ordering identityNT100-RE-DN
2Official evidenceHilscher NT 100-RE-DN official product record
3Installation surveyKeep the two Ethernet-port roles consistent with the selected firmware conversion.
4Compatibility gateNT 100-RE-DN / 1712.170
5Commissioning recordPart number, firmware/license inventory, node map and end-to-end I/O update test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact NT100-RE-DN source record named on this page.
Interface reviewTwo Ethernet ports, five-pin DeviceNet connector and USB diagnostics
Receiving checkConfirm licensed protocol pair, master/slave counts, memory-card strategy and network connector wiring.
Release packagePart number, firmware/license inventory, node map and end-to-end I/O update test

NT100-RE-DN FAQ

What maintenance record preserves the supply evidence for NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway?

Use 24 VDC ±6 V as the controlled supply value in the Hilscher netTAP 100 gateways review. For ethernet-to-devicenet integration, wire the isolated DeviceNet trunk to the documented five-pin connector. Mark the evidence source and revision so future reviewers can reproduce the decision.

How does order number limit a proposed NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway substitute?

Order number is published as NT 100-RE-DN / 1712.170 for the Hilscher netTAP 100 gateways. For legacy fieldbus migration, keep the two Ethernet-port roles consistent with the selected firmware conversion. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How can a technician test NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway without exceeding the stated power input?

The official NT100-RE-DN record gives power input as 24 VDC ±6 V for its nettap 100 real-time ethernet to devicenet gateway function. For protocol-isolated machine cell, back up configuration and license information before exchanging the gateway. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

When can the NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway ethernet interface entry be released for quotation?

For this protocol conversion between industrial ethernet and devicenet selection, ethernet interface is 10/100BASE-T, isolated. For devicenet trunk modernization, use USB diagnostics to verify both networks before releasing mapped I/O. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How should engineers verify devicenet connector before fitting NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway?

Use 5-pin COMBICON as the controlled devicenet connector value in the Hilscher netTAP 100 gateways review. For ethernet-to-devicenet integration, wire the isolated DeviceNet trunk to the documented five-pin connector. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

What installation decision is controlled by supply on NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway?

Supply is published as 24 VDC ±6 V for the Hilscher netTAP 100 gateways. For legacy fieldbus migration, keep the two Ethernet-port roles consistent with the selected firmware conversion. Use the value as a selection boundary, not as a prediction of site performance.

What commissioning check confirms the documented order number for NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway?

The official NT100-RE-DN record gives order number as NT 100-RE-DN / 1712.170 for its nettap 100 real-time ethernet to devicenet gateway function. For protocol-isolated machine cell, back up configuration and license information before exchanging the gateway. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

At which review gate should NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway power input be challenged?

For this protocol conversion between industrial ethernet and devicenet selection, power input is 24 VDC ±6 V. For devicenet trunk modernization, use USB diagnostics to verify both networks before releasing mapped I/O. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

Which drawing or schedule should carry the NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway ethernet interface record?

Use 10/100BASE-T, isolated as the controlled ethernet interface value in the Hilscher netTAP 100 gateways review. For ethernet-to-devicenet integration, wire the isolated DeviceNet trunk to the documented five-pin connector. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

Which companion item must agree with devicenet connector for NT100-RE-DN netTAP 100 Real-Time Ethernet to DeviceNet Gateway?

DeviceNet connector is published as 5-pin COMBICON for the Hilscher netTAP 100 gateways. For legacy fieldbus migration, keep the two Ethernet-port roles consistent with the selected firmware conversion. Log the comparison against the controlled parts list before the item enters the cabinet.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Hilscher netTAP 100 gateways application review

NT100-RE-DN Applications

These contexts use the manufacturer-documented function of NT100-RE-DN; each requires a separate site-fit decision.

Application contexts

01 · Ethernet-to-DeviceNet integrationApply the documented protocol conversion between industrial ethernet and devicenet only after confirming order number as NT 100-RE-DN / 1712.170.
02 · Legacy fieldbus migrationApply the documented protocol conversion between industrial ethernet and devicenet only after confirming fieldbus side as DeviceNet.
03 · Protocol-isolated machine cellApply the documented protocol conversion between industrial ethernet and devicenet only after confirming ethernet side as Supported loadable real-time Ethernet protocol.
04 · DeviceNet trunk modernizationApply the documented protocol conversion between industrial ethernet and devicenet only after confirming power input as 24 VDC ±6 V.

Why choose Nordwel

Traceable identityNT100-RE-DN remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to protocol conversion between industrial ethernet and devicenet, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain NT100-RE-DN, Two Ethernet ports, five-pin DeviceNet connector and USB diagnostics, and the approved site record as three independent checks.
Need help matching this Hilscher configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp