other
Products
FS-V11 Cable-Type Digital Fiber Amplifier
FS-V11 Cable-Type Digital Fiber Amplifier
FS-V11 Cable-Type Digital Fiber Amplifier

KEYENCE FS-V11 Cable-Type Digital Fiber Amplifier

EMAIL SALES
KEYENCE official data reviewed
FS-V11 — Cable-Type Digital Fiber Amplifier

A discontinued cable-type main fiber amplifier with red LED source, selectable response modes and an NPN open-collector output.

FS-V10 SeriesNPN fiber-optic sensor signal processingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerKEYENCE
Documented familyFS-V10 Series
Product formCable-Type Digital Fiber Amplifier
Primary functionNPN fiber-optic sensor signal processing
Product statusDiscontinued
Unit roleMain unit
Connection styleCable type
OutputNPN open collector
  • Brand:

    Others
  • Item NO.:

    FS-V11
  • Goods Stock:

    1
  • Part Number:

    FS-V11
  • Description:

    A discontinued cable-type main fiber amplifier with red LED source, selectable response modes and an NPN open-collector output.
FS-V11 configuration inquiry

Get a precise quote for FS-V11

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

FS-V11 official identification

A discontinued cable-type main fiber amplifier with red LED source, selectable response modes and an NPN open-collector output.

System roleNPN fiber-optic sensor signal processing
Connection boundaryCable-type main unit with NPN open-collector output
Selection focusConfirm NPN logic, response mode, expansion count and replacement status.
Release evidenceMode-setting record, threshold test, output load check and installed-chain inventory

Engineering and installation checks

  • undefined
  • Identify the main-unit position before disconnecting expansion amplifiers.
  • Manufacturer verification basis: KEYENCE FS-V11 official model page.
Official product data

FS-V11 key specifications

Product status Discontinued
Unit role Main unit
Connection style Cable type
Output NPN open collector
Light source Red LED
Fine response 250 µs
Turbo response 500 µs
Super response 1 ms
Supply 12–24 V DC ±10%
Current consumption 50 mA maximum
Operating temperature −10 to +55 °C
Maximum expansion 16 additional units

Source: KEYENCE FS-V11 official model page.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of FS-V11.

  • Identify the main-unit position before disconnecting expansion amplifiers.
  • Keep the 12–24 V DC supply within the stated tolerance.
  • Select response mode from the application timing requirement.
  • Re-teach the threshold and verify both light-ON and dark-ON behavior as configured.
Record the as-found condition and the final mode-setting record, threshold test, output load check and installed-chain inventory
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for FS-V11 before purchase approval.

Control input
NPN-compatible receiving circuit
Supply range
12–24 V DC ±10%
Speed demand
250 µs, 500 µs or 1 ms mode
Expansion chain
Up to 16 added units
Lifecycle
Discontinued; replacement requires separate engineering review
Final selection: Use only the values published for FS-V11 in KEYENCE FS-V11 official model page; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

KEYENCE verified models 01PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

KEYENCE verified models 02ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

KEYENCE verified models 036ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

KEYENCE verified models 046ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CM598-CNDC562DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03DO572PM5032-R-ETH6ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7654-7HC00-0XA0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

FS-V11 Order Guide

Use the complete KEYENCE designation and installed hardware record for engineering review.
1Ordering identityFS-V11
2Official evidenceKEYENCE FS-V11 official model page
3Installation surveyKeep the 12–24 V DC supply within the stated tolerance.
4Compatibility gateNPN-compatible receiving circuit
5Commissioning recordMode-setting record, threshold test, output load check and installed-chain inventory
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact FS-V11 source record named on this page.
Interface reviewCable-type main unit with NPN open-collector output
Receiving checkConfirm NPN logic, response mode, expansion count and replacement status.
Release packageMode-setting record, threshold test, output load check and installed-chain inventory

FS-V11 FAQ

How should super response be written in the purchase record for FS-V11 Cable-Type Digital Fiber Amplifier?

Super response is published as 1 ms for the FS-V10 Series. For fast fiber part detection, identify the main-unit position before disconnecting expansion amplifiers. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What field observation validates operating temperature for FS-V11 Cable-Type Digital Fiber Amplifier?

The official FS-V11 record gives operating temperature as −10 to +55 °C for its cable-type digital fiber amplifier function. For small-object counting, keep the 12–24 V DC supply within the stated tolerance. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

What fault could result from misreading supply range on FS-V11 Cable-Type Digital Fiber Amplifier?

For this npn fiber-optic sensor signal processing selection, supply range is 12–24 V DC ±10%. For amplifier-bank maintenance, select response mode from the application timing requirement. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

What photograph or measurement proves lifecycle on received FS-V11 Cable-Type Digital Fiber Amplifier?

Use Discontinued; replacement requires separate engineering review as the controlled lifecycle value in the FS-V10 Series review. For legacy sensor restoration, re-teach the threshold and verify both light-ON and dark-ON behavior as configured. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which connection style value identifies the reviewed FS-V11 Cable-Type Digital Fiber Amplifier configuration?

Connection style is published as Cable type for the FS-V10 Series. For fast fiber part detection, identify the main-unit position before disconnecting expansion amplifiers. Use the value as a selection boundary, not as a prediction of site performance.

Why does fine response matter when selecting FS-V11 Cable-Type Digital Fiber Amplifier?

The official FS-V11 record gives fine response as 250 µs for its cable-type digital fiber amplifier function. For small-object counting, keep the 12–24 V DC supply within the stated tolerance. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

Which mismatch involving supply should stop approval of FS-V11 Cable-Type Digital Fiber Amplifier?

For this npn fiber-optic sensor signal processing selection, supply is 12–24 V DC ±10%. For amplifier-bank maintenance, select response mode from the application timing requirement. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

What maintenance record preserves the maximum expansion evidence for FS-V11 Cable-Type Digital Fiber Amplifier?

Use 16 additional units as the controlled maximum expansion value in the FS-V10 Series review. For legacy sensor restoration, re-teach the threshold and verify both light-ON and dark-ON behavior as configured. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

How does speed demand limit a proposed FS-V11 Cable-Type Digital Fiber Amplifier substitute?

Speed demand is published as 250 µs, 500 µs or 1 ms mode for the FS-V10 Series. For fast fiber part detection, identify the main-unit position before disconnecting expansion amplifiers. Log the comparison against the controlled parts list before the item enters the cabinet.

How can a technician test FS-V11 Cable-Type Digital Fiber Amplifier without exceeding the stated product status?

The official FS-V11 record gives product status as Discontinued for its cable-type digital fiber amplifier function. For small-object counting, keep the 12–24 V DC supply within the stated tolerance. Check the mating device, protective hardware and configured function before energization.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
FS-V10 Series application review

FS-V11 Applications

These contexts use the manufacturer-documented function of FS-V11; each requires a separate site-fit decision.

Application contexts

01 · Fast fiber part detectionApply the documented npn fiber-optic sensor signal processing only after confirming control input as NPN-compatible receiving circuit.
02 · Small-object countingApply the documented npn fiber-optic sensor signal processing only after confirming supply range as 12–24 V DC ±10%.
03 · Amplifier-bank maintenanceApply the documented npn fiber-optic sensor signal processing only after confirming speed demand as 250 µs, 500 µs or 1 ms mode.
04 · Legacy sensor restorationApply the documented npn fiber-optic sensor signal processing only after confirming expansion chain as Up to 16 added units.

Why choose Nordwel

Traceable identityFS-V11 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to npn fiber-optic sensor signal processing, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain FS-V11, Cable-type main unit with NPN open-collector output, and the approved site record as three independent checks.
Need help matching this KEYENCE configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp