other
Products
DHPS-20-A Pneumatic Parallel Gripper
DHPS-20-A Pneumatic Parallel Gripper
DHPS-20-A Pneumatic Parallel Gripper

Festo DHPS-20-A Pneumatic Parallel Gripper

EMAIL SALES
Festo official data reviewed
DHPS-20-A — Pneumatic Parallel Gripper

A size-20 double-acting parallel gripper with two plain-bearing jaws, 6.5 mm travel per jaw and published opening and closing forces.

Festo DHPSDouble-acting two-jaw parallel grippingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerFesto
Documented familyFesto DHPS
Product formPneumatic Parallel Gripper
Primary functionDouble-acting two-jaw parallel gripping
Part number1254046
Size20
Stroke per jaw6.5 mm
Number of jaws2
  • Brand:

    Others
  • Item NO.:

    DHPS-20-A
  • Goods Stock:

    1
  • Part Number:

    DHPS-20-A
  • Description:

    A size-20 double-acting parallel gripper with two plain-bearing jaws, 6.5 mm travel per jaw and published opening and closing forces.
DHPS-20-A configuration inquiry

Get a precise quote for DHPS-20-A

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DHPS-20-A official identification

A size-20 double-acting parallel gripper with two plain-bearing jaws, 6.5 mm travel per jaw and published opening and closing forces.

System roleDouble-acting two-jaw parallel gripping
Connection boundaryPneumatic drive with proximity-switch sensing
Selection focusConfirm grip direction, jaw travel, workpiece mass, pressure range and cycle rate.
Release evidenceFinger-mass calculation, pressure reading, opening/closing time and workpiece retention test

Engineering and installation checks

  • undefined
  • Mount the gripper in any permitted orientation while keeping jaw guides clean.
  • Manufacturer verification basis: Festo DHPS-20-A official data sheet.
Official product data

DHPS-20-A key specifications

Part number 1254046
Size 20
Stroke per jaw 6.5 mm
Number of jaws 2
Operating principle Double acting
Operating pressure 2–8 bar
Maximum frequency 3 Hz
Opening time at 6 bar 59 ms
Closing time at 6 bar 87 ms
Total opening force 320 N
Total closing force 290 N
Product weight 380 g

Source: Festo DHPS-20-A official data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of DHPS-20-A.

  • Mount the gripper in any permitted orientation while keeping jaw guides clean.
  • Design fingers within the published 250 g maximum jaw-finger mass.
  • Supply clean compressed air between 2 and 8 bar.
  • Validate workpiece retention at the actual acceleration and pressure.
Record the as-found condition and the final finger-mass calculation, pressure reading, opening/closing time and workpiece retention test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for DHPS-20-A before purchase approval.

Gripper size
20
Required travel
6.5 mm per jaw
Grip force
320 N opening / 290 N closing
Cycle demand
3 Hz maximum
Detection
Compatible proximity sensing provision
Final selection: Use only the values published for DHPS-20-A in Festo DHPS-20-A official data sheet; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Festo verified models 01DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Festo verified models 02PM564-RP-ACATSA3S-0ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Festo verified models 0320F11NC104JA0NNNNN20F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Festo verified models 046ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06DO5266ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DHPS-20-A Order Guide

Use the complete Festo designation and installed hardware record for engineering review.
1Ordering identityDHPS-20-A
2Official evidenceFesto DHPS-20-A official data sheet
3Installation surveyDesign fingers within the published 250 g maximum jaw-finger mass.
4Compatibility gate20
5Commissioning recordFinger-mass calculation, pressure reading, opening/closing time and workpiece retention test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact DHPS-20-A source record named on this page.
Interface reviewPneumatic drive with proximity-switch sensing
Receiving checkConfirm grip direction, jaw travel, workpiece mass, pressure range and cycle rate.
Release packageFinger-mass calculation, pressure reading, opening/closing time and workpiece retention test

DHPS-20-A FAQ

What fault could result from misreading operating pressure on DHPS-20-A Pneumatic Parallel Gripper?

For this double-acting two-jaw parallel gripping selection, operating pressure is 2–8 bar. For parallel part gripping, mount the gripper in any permitted orientation while keeping jaw guides clean. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves closing time at 6 bar on received DHPS-20-A Pneumatic Parallel Gripper?

Use 87 ms as the controlled closing time at 6 bar value in the Festo DHPS review. For machine loading, design fingers within the published 250 g maximum jaw-finger mass. Release is appropriate only when the manufacturer value and the project requirement agree.

Which product weight value identifies the reviewed DHPS-20-A Pneumatic Parallel Gripper configuration?

Product weight is published as 380 g for the Festo DHPS. For assembly transfer, supply clean compressed air between 2 and 8 bar. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does grip force matter when selecting DHPS-20-A Pneumatic Parallel Gripper?

The official DHPS-20-A record gives grip force as 320 N opening / 290 N closing for its pneumatic parallel gripper function. For inspection fixture handling, validate workpiece retention at the actual acceleration and pressure. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving part number should stop approval of DHPS-20-A Pneumatic Parallel Gripper?

For this double-acting two-jaw parallel gripping selection, part number is 1254046. For parallel part gripping, mount the gripper in any permitted orientation while keeping jaw guides clean. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What maintenance record preserves the number of jaws evidence for DHPS-20-A Pneumatic Parallel Gripper?

Use 2 as the controlled number of jaws value in the Festo DHPS review. For machine loading, design fingers within the published 250 g maximum jaw-finger mass. Mark the evidence source and revision so future reviewers can reproduce the decision.

How does maximum frequency limit a proposed DHPS-20-A Pneumatic Parallel Gripper substitute?

Maximum frequency is published as 3 Hz for the Festo DHPS. For assembly transfer, supply clean compressed air between 2 and 8 bar. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How can a technician test DHPS-20-A Pneumatic Parallel Gripper without exceeding the stated total opening force?

The official DHPS-20-A record gives total opening force as 320 N for its pneumatic parallel gripper function. For inspection fixture handling, validate workpiece retention at the actual acceleration and pressure. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

When can the DHPS-20-A Pneumatic Parallel Gripper gripper size entry be released for quotation?

For this double-acting two-jaw parallel gripping selection, gripper size is 20. For parallel part gripping, mount the gripper in any permitted orientation while keeping jaw guides clean. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How should engineers verify cycle demand before fitting DHPS-20-A Pneumatic Parallel Gripper?

Use 3 Hz maximum as the controlled cycle demand value in the Festo DHPS review. For machine loading, design fingers within the published 250 g maximum jaw-finger mass. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Festo DHPS application review

DHPS-20-A Applications

These contexts use the manufacturer-documented function of DHPS-20-A; each requires a separate site-fit decision.

Application contexts

01 · Parallel part grippingApply the documented double-acting two-jaw parallel gripping only after confirming gripper size as 20.
02 · Machine loadingApply the documented double-acting two-jaw parallel gripping only after confirming required travel as 6.5 mm per jaw.
03 · Assembly transferApply the documented double-acting two-jaw parallel gripping only after confirming grip force as 320 N opening / 290 N closing.
04 · Inspection fixture handlingApply the documented double-acting two-jaw parallel gripping only after confirming cycle demand as 3 Hz maximum.

Why choose Nordwel

Traceable identityDHPS-20-A remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to double-acting two-jaw parallel gripping, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain DHPS-20-A, Pneumatic drive with proximity-switch sensing, and the approved site record as three independent checks.
Need help matching this Festo configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp