other
Products
DMM-HB1 Side-On Optical Data Transmission Device
DMM-HB1 Side-On Optical Data Transmission Device
DMM-HB1 Side-On Optical Data Transmission Device

Hokuyo DMM-HB1 Side-On Optical Data Transmission Device

EMAIL SALES
Hokuyo official data reviewed
DMM-HB1 — Side-On Optical Data Transmission Device

A side-on DMM optical data unit for direct CC-Link connection, transferring eight input and eight output bits over a short optical path.

Hokuyo DMM SeriesShort-range 8-bit bidirectional optical data transferExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerHokuyo
Documented familyHokuyo DMM Series
Product formSide-On Optical Data Transmission Device
Primary functionShort-range 8-bit bidirectional optical data transfer
Optical orientationSide on
Transmission distance0–1 m
Data capacity8 input / 8 output bits
Transmission modeHalf-duplex, two way
  • Brand:

    Others
  • Item NO.:

    DMM-HB1
  • Goods Stock:

    1
  • Part Number:

    DMM-HB1
  • Description:

    A side-on DMM optical data unit for direct CC-Link connection, transferring eight input and eight output bits over a short optical path.
DMM-HB1 configuration inquiry

Get a precise quote for DMM-HB1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DMM-HB1 official identification

A side-on DMM optical data unit for direct CC-Link connection, transferring eight input and eight output bits over a short optical path.

System roleShort-range 8-bit bidirectional optical data transfer
Connection boundaryCC-Link direct connection; side-on optical axis
Selection focusConfirm side-on geometry, 0–1 m path, station settings and CC-Link speed.
Release evidenceAlignment margin, address record, eight-bit pattern test and network diagnostic capture

Engineering and installation checks

  • undefined
  • Align opposing optical faces within the published 30° full angle.
  • Manufacturer verification basis: Hokuyo DMM-HB1 official product record.
Official product data

DMM-HB1 key specifications

Optical orientation Side on
Transmission distance 0–1 m
Data capacity 8 input / 8 output bits
Transmission mode Half-duplex, two way
Response time 40 ms
Supply 24 V DC
Permissible supply 18–30 V DC
Beam angle 30° full angle
Network connection CC-Link direct
Supported network rates 10 / 5 / 2.5 / 0.625 / 0.156 Mbit/s

Source: Hokuyo DMM-HB1 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of DMM-HB1.

  • Align opposing optical faces within the published 30° full angle.
  • Keep the 0–1 m path free of moving obstructions and contamination.
  • Set CC-Link station and speed to the approved network schedule.
  • Test all eight bits in both directions rather than relying on link indication alone.
Record the as-found condition and the final alignment margin, address record, eight-bit pattern test and network diagnostic capture
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for DMM-HB1 before purchase approval.

Optical spacing
0–1 m
Mounting view
Side-on transmission
Payload
8 bits each direction
Network
CC-Link at a supported rate
Power
24 V DC within 18–30 V
Final selection: Use only the values published for DMM-HB1 in Hokuyo DMM-HB1 official product record; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Hokuyo verified models 01DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hokuyo verified models 02PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hokuyo verified models 03ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Hokuyo verified models 046ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7521-7EH00-0AB06ES7414-3FM07-0AB06ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CM598-CNDC5626ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DMM-HB1 Order Guide

Use the complete Hokuyo designation and installed hardware record for engineering review.
1Ordering identityDMM-HB1
2Official evidenceHokuyo DMM-HB1 official product record
3Installation surveyKeep the 0–1 m path free of moving obstructions and contamination.
4Compatibility gate0–1 m
5Commissioning recordAlignment margin, address record, eight-bit pattern test and network diagnostic capture
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact DMM-HB1 source record named on this page.
Interface reviewCC-Link direct connection; side-on optical axis
Receiving checkConfirm side-on geometry, 0–1 m path, station settings and CC-Link speed.
Release packageAlignment margin, address record, eight-bit pattern test and network diagnostic capture

DMM-HB1 FAQ

What commissioning check confirms the documented permissible supply for DMM-HB1 Side-On Optical Data Transmission Device?

The official DMM-HB1 record gives permissible supply as 18–30 V DC for its side-on optical data transmission device function. For moving-station data exchange, align opposing optical faces within the published 30° full angle. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

At which review gate should DMM-HB1 Side-On Optical Data Transmission Device supported network rates be challenged?

For this short-range 8-bit bidirectional optical data transfer selection, supported network rates is 10 / 5 / 2.5 / 0.625 / 0.156 Mbit/s. For contactless transfer fixture, keep the 0–1 m path free of moving obstructions and contamination. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

Which drawing or schedule should carry the DMM-HB1 Side-On Optical Data Transmission Device payload record?

Use 8 bits each direction as the controlled payload value in the Hokuyo DMM Series review. For rotary-table signal bridge, set CC-Link station and speed to the approved network schedule. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which companion item must agree with optical orientation for DMM-HB1 Side-On Optical Data Transmission Device?

Optical orientation is published as Side on for the Hokuyo DMM Series. For short-gap conveyor communication, test all eight bits in both directions rather than relying on link indication alone. Use the value as a selection boundary, not as a prediction of site performance.

How should a discrepancy in transmission mode be closed for DMM-HB1 Side-On Optical Data Transmission Device?

The official DMM-HB1 record gives transmission mode as Half-duplex, two way for its side-on optical data transmission device function. For moving-station data exchange, align opposing optical faces within the published 30° full angle. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

What receiving evidence is required for the permissible supply stated for DMM-HB1 Side-On Optical Data Transmission Device?

For this short-range 8-bit bidirectional optical data transfer selection, permissible supply is 18–30 V DC. For contactless transfer fixture, keep the 0–1 m path free of moving obstructions and contamination. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

How is supported network rates separated from site-specific assumptions for DMM-HB1 Side-On Optical Data Transmission Device?

Use 10 / 5 / 2.5 / 0.625 / 0.156 Mbit/s as the controlled supported network rates value in the Hokuyo DMM Series review. For rotary-table signal bridge, set CC-Link station and speed to the approved network schedule. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

How should payload be written in the purchase record for DMM-HB1 Side-On Optical Data Transmission Device?

Payload is published as 8 bits each direction for the Hokuyo DMM Series. For short-gap conveyor communication, test all eight bits in both directions rather than relying on link indication alone. Log the comparison against the controlled parts list before the item enters the cabinet.

What field observation validates optical orientation for DMM-HB1 Side-On Optical Data Transmission Device?

The official DMM-HB1 record gives optical orientation as Side on for its side-on optical data transmission device function. For moving-station data exchange, align opposing optical faces within the published 30° full angle. Check the mating device, protective hardware and configured function before energization.

What fault could result from misreading transmission mode on DMM-HB1 Side-On Optical Data Transmission Device?

For this short-range 8-bit bidirectional optical data transfer selection, transmission mode is Half-duplex, two way. For contactless transfer fixture, keep the 0–1 m path free of moving obstructions and contamination. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Hokuyo DMM Series application review

DMM-HB1 Applications

These contexts use the manufacturer-documented function of DMM-HB1; each requires a separate site-fit decision.

Application contexts

01 · Moving-station data exchangeApply the documented short-range 8-bit bidirectional optical data transfer only after confirming optical spacing as 0–1 m.
02 · Contactless transfer fixtureApply the documented short-range 8-bit bidirectional optical data transfer only after confirming mounting view as Side-on transmission.
03 · Rotary-table signal bridgeApply the documented short-range 8-bit bidirectional optical data transfer only after confirming payload as 8 bits each direction.
04 · Short-gap conveyor communicationApply the documented short-range 8-bit bidirectional optical data transfer only after confirming network as CC-Link at a supported rate.

Why choose Nordwel

Traceable identityDMM-HB1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to short-range 8-bit bidirectional optical data transfer, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain DMM-HB1, CC-Link direct connection; side-on optical axis, and the approved site record as three independent checks.
Need help matching this Hokuyo configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp