other
Products
IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller
IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller
IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller

GE IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller

EMAIL SALES
GE official data reviewed
IC200CPUE05-LT — VersaMax CPUE05 Ethernet Controller

A VersaMax controller combining Ethernet communication, two serial ports and configurable application memory. The complete ordering identity is IC200CPUE05-LT.

VersaMax Ethernet controllersController execution with Ethernet and dual serial communicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax Ethernet controllers
Exact modelIC200CPUE05-LT
Verified functionController execution with Ethernet and dual serial communication
Interface boundary10 Mbit/s RJ-45 Ethernet plus RS-232 and RS-485 ports
Base catalog numberIC200CPUE05
Selection basisConfirm revision, firmware and network settings.
  • Brand:

    General Electric
  • Item NO.:

    IC200CPUE05-LT
  • Goods Stock:

    1
  • Part Number:

    IC200CPUE05-LT
  • Description:

    A VersaMax controller combining Ethernet communication, two serial ports and configurable application memory. The complete ordering identity is IC200CPUE05-LT.
IC200CPUE05-LT configuration inquiry

Get a precise quote for IC200CPUE05-LT

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200CPUE05-LT official identification

A VersaMax controller combining Ethernet communication, two serial ports and configurable application memory. The complete ordering identity is IC200CPUE05-LT.

Operating scopeController execution with Ethernet and dual serial communication
Mating arrangement10 Mbit/s RJ-45 Ethernet plus RS-232 and RS-485 ports
Host platform10 Mbit/s RJ-45 Ethernet
Field verificationcomplete CPUE05 label, firmware branch, application backup, IP and EGD record, port settings and restart test; exact IC200CPUE05-LT identity

Engineering and installation checks

  • The ordering and receiving identity is IC200CPUE05-LT.
  • Back up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet.
  • The technical definition follows Emerson VersaMax IC200CPUE05 Important Product Information GFK-1892AC.
Official product data

IC200CPUE05-LT key specifications

Base catalog number IC200CPUE05
Configurable memory 64 kB maximum
Program storage System flash and battery-backed RAM
Embedded communications Ethernet, RS-232 and RS-485
Ethernet rate 10 Mbit/s half- or full-duplex
Ethernet connector RJ-45 UTP
SRTP server connections 8
EGD exchanges 32 configuration-based exchanges
Dimensions 126 × 128 × 69.1 mm
Boolean execution 0.8 ms/K typical

Source: Emerson VersaMax IC200CPUE05 Important Product Information GFK-1892AC.

Pre-order check 01

Installation environment

Prepare the versamax cpue05 ethernet controller by recording its installed connections, settings and complete IC200CPUE05-LT label.

  • Back up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet.
  • Match replacement firmware to the documented hardware revision before loading the project.
  • Verify power budget, DIN-rail bonding, Ethernet cabling and expansion-module inventory.
  • Test SRTP access, EGD exchange health, serial communication and controlled restart.
Close the work with complete CPUE05 label, firmware branch, application backup, IP and EGD record, port settings and restart test; exact IC200CPUE05-LT identity.
Pre-order check 02

Compatibility confirmation

Approve IC200CPUE05-LT only when the documented function and every listed interface boundary agree with the installed design.

Base function
IC200CPUE05 Ethernet controller
Network port
10 Mbit/s RJ-45 Ethernet
Serial ports
RS-232 and RS-485
Firmware boundary
Firmware must be compatible with the complete hardware revision
Exact identity
IC200CPUE05-LT
Final selection: Use only the values published for IC200CPUE05-LT in Emerson VersaMax IC200CPUE05 Important Product Information GFK-1892AC; site suitability remains an engineering decision.
Recommended model families

More GE models

GE verified models 01GE IC086SLN080-AGE IC200ALG230DGE IC200ALG230J

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 02GE IC200ALG240-KEGE IC200ALG264AGE IC200ALG264G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 03GE IC200ALG264LGE IC200ALG265DGE IC200ALG265G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 04GE IC200ALG320FGE IC200ALG322GGE IC200ALG326K

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CM5640-2ETHABB CM582-DPABB CM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CM589-PNIOABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB DO526ABB DO572ABB PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB PM5072-T-2ETHABB PM564-RP-ACYokogawa ATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Yokogawa ATSS3D-0Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Siemens 6ES7414-2XG02-0AB0Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6ES7515-2AN03-0AB0Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08B&R 8BVI0330HWS0.000-1B&R X20IF2181-2B&R 8B0C0320HW00.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200CPUE05-LT Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200CPUE05-LT
2Configuration captureBack up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet.
3Mechanical fitMatch replacement firmware to the documented hardware revision before loading the project.
4Connection reviewVerify power budget, DIN-rail bonding, Ethernet cabling and expansion-module inventory.
5Commissioning proofcomplete CPUE05 label, firmware branch, application backup, IP and EGD record, port settings and restart test; exact IC200CPUE05-LT identity
6Release decisionConfirm IC200CPUE05-LT; confirm the complete hardware revision, compatible firmware branch, Ethernet services, serial settings and I/O layout.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200CPUE05-LT.

Support scope

Configurable memory review64 kB maximum is checked against the received unit.
Network port review10 Mbit/s RJ-45 Ethernet
Program storage checkpointSystem flash and battery-backed RAM
Acceptance packagecomplete CPUE05 label, firmware branch, application backup, IP and EGD record, port settings and restart test; exact IC200CPUE05-LT identity

IC200CPUE05-LT FAQ

What field observation validates dimensions for IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

For IC200CPUE05-LT, dimensions as 126 × 128 × 69.1 mm for its versamax cpue05 ethernet controller function. For ethernet-connected machine control for ic200cpue05-lt, back up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

What fault could result from misreading network port on IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

For this controller execution with ethernet and dual serial communication selection, network port is 10 Mbit/s RJ-45 Ethernet. For egd data exchange controller, match replacement firmware to the documented hardware revision before loading the project. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What photograph or measurement proves exact identity on received IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

Use IC200CPUE05-LT as the controlled exact identity value in the VersaMax Ethernet controllers review. For serial and ethernet integration, verify power budget, DIN-rail bonding, Ethernet cabling and expansion-module inventory. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which program storage value identifies the reviewed IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller configuration?

Program storage is published as System flash and battery-backed RAM for the VersaMax Ethernet controllers. For revision-specific cpue05 replacement, test SRTP access, EGD exchange health, serial communication and controlled restart. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

Why does ethernet connector matter when selecting IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

For IC200CPUE05-LT, ethernet connector as RJ-45 UTP for its versamax cpue05 ethernet controller function. For ethernet-connected machine control for ic200cpue05-lt, back up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

Which mismatch involving dimensions should stop approval of IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

For this controller execution with ethernet and dual serial communication selection, dimensions is 126 × 128 × 69.1 mm. For egd data exchange controller, match replacement firmware to the documented hardware revision before loading the project. If the received label and controlled record disagree, hold the item until the exact identity is reconciled.

What maintenance record preserves the network port evidence for IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller?

Use 10 Mbit/s RJ-45 Ethernet as the controlled network port value in the VersaMax Ethernet controllers review. For serial and ethernet integration, verify power budget, DIN-rail bonding, Ethernet cabling and expansion-module inventory. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How does exact identity limit a proposed IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller substitute?

Exact identity is published as IC200CPUE05-LT for the VersaMax Ethernet controllers. For revision-specific cpue05 replacement, test SRTP access, EGD exchange health, serial communication and controlled restart. Use the value as a selection boundary, not as a prediction of site performance.

How can a technician test IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller without exceeding the stated program storage?

For IC200CPUE05-LT, program storage as System flash and battery-backed RAM for its versamax cpue05 ethernet controller function. For ethernet-connected machine control for ic200cpue05-lt, back up logic, hardware configuration, IP parameters, EGD exchanges and both serial ports. Record IC200CPUE05-LT on the acceptance sheet. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

When can the IC200CPUE05-LT VersaMax CPUE05 Ethernet Controller ethernet connector entry be released for quotation?

For this controller execution with ethernet and dual serial communication selection, ethernet connector is RJ-45 UTP. For egd data exchange controller, match replacement firmware to the documented hardware revision before loading the project. Trace the value to the published technical record and the as-installed drawing as separate evidence items.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax Ethernet controllers application review

IC200CPUE05-LT Applications

These contexts use IC200CPUE05-LT for controller execution with ethernet and dual serial communication, with project-specific connection and commissioning evidence.

Application contexts

01 · Ethernet-connected machine control for IC200CPUE05-LTApply the documented controller execution with ethernet and dual serial communication only after confirming base function as IC200CPUE05 Ethernet controller.
02 · EGD data exchange controllerApply the documented controller execution with ethernet and dual serial communication only after confirming network port as 10 Mbit/s RJ-45 Ethernet.
03 · Serial and Ethernet integrationApply the documented controller execution with ethernet and dual serial communication only after confirming serial ports as RS-232 and RS-485.
04 · Revision-specific CPUE05 replacementApply the documented controller execution with ethernet and dual serial communication only after confirming firmware boundary as Firmware must be compatible with the complete hardware revision.

Why choose Nordwel

Base catalog number traceabilityIC200CPUE05-LT is reviewed against IC200CPUE05.
Configurable memory control64 kB maximum is checked independently.
Serial ports fitRS-232 and RS-485
Coordinated releaseTiffany manages quotation, receiving evidence and commissioning records for IC200CPUE05-LT.
Keep ordering identity, system fit and final acceptance as separate decisions for IC200CPUE05-LT.
Need Tiffany to verify the IC200CPUE05-LT acceptance package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp