other
Products
GE IC694DSM324-BE exact model
GE IC694DSM324-BE exact model
GE IC694DSM324-BE exact model

GE IC694DSM324-BE Four-axis digital servo motion controller

EMAIL SALES
Manufacturer data reviewed
IC694DSM324-BE — Four-axis digital servo motion controller

Controls up to four supported digital servo axes with motion-synchronous local logic. FSSB servo interface; electronic cam-follower function; complete BE identity retained.

GERX3i motion controlExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC694DSM324-BE verified profile
ManufacturerGE
Exact modelIC694DSM324-BE
Product typeFour-axis digital servo motion controller
Product familyRX3i motion control
Primary roleControls up to four supported digital servo axes with motion-synchronous local logic
Interface contextFSSB servo interface; electronic cam-follower function; complete BE identity retained
  • Brand:

    General Electric
  • Item NO.:

    IC694DSM324-BE
  • Goods Stock:

    100
  • Part Number:

    GE
  • Weight:

    IC694DSM324-BE
  • Dimensions:

    Four-axis digital servo motion controller
  • Manufacture Year:

    RX3i motion control
  • Certification:

    Controls up to four supported digital servo axes with motion-synchronous local logic
  • Description:

    FSSB servo interface; electronic cam-follower function; complete BE identity retained
IC694DSM324-BE configuration inquiry

Get a precise quote for IC694DSM324-BE

Email Sales
Sales managerTiffany Guan

IC694DSM324-BE official identification

Controls up to four supported digital servo axes with motion-synchronous local logic. FSSB servo interface; electronic cam-follower function; complete BE identity retained.

Installed roleControls up to four supported digital servo axes with motion-synchronous local logic
Interface contextFSSB servo interface; electronic cam-follower function; complete BE identity retained
Exact-code controlUse IC694DSM324-BE without suffix substitution.
Evidence basisOfficial GE Intelligent Platforms DSM324i documentation

Engineering and installation checks

  • Confirm IC694DSM324-BE from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

IC694DSM324-BE key specifications

Exact modelIC694DSM324-BE
Controlled axesUp to 4
Servo interfaceFSSB
Local functionMotion-synchronous local logic
Motion functionElectronic cam follower
Backplane supply5 VDC
Revision controlBE retained for firmware and hardware matching

Source: Official GE Intelligent Platforms DSM324i documentation.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm IC694DSM324-BE from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
IC694DSM324-BE
Product family
RX3i motion control
Installed role
Controls up to four supported digital servo axes with motion-synchronous local logic
Interface boundary
FSSB servo interface; electronic cam-follower function; complete BE identity retained
Verification source
Official GE Intelligent Platforms DSM324i documentation
Final selection: match the complete IC694DSM324-BE identity before order release.
Recommended model families

More GE models

GE selection 01GE IC695CMU310-DMGE IC695CPE302GE IC695CPE305-AFBA

Confirm the complete order code and installed-system context before replacement.

GE selection 02GE IC695SPF002BGE IC695RMX228-ACABGE IC695PSD040M

Confirm the complete order code and installed-system context before replacement.

GE selection 03GE IC695PSD040GE IC695PNS001-BCBDGE IC695PSA040K

Confirm the complete order code and installed-system context before replacement.

GE selection 04GE IC695PSA140JGE IC695PSD040HGE IC695ACC400-CA

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01ABB GJR2371100R1040 88VP02-EABB TKS-P20-541I-N001ABB PFRL101B-1.0KN

Confirm the complete order code and installed-system context before replacement.

Additional selection 02ABB ACS-BP-SABB DSQC462ABB PM5072-T-2ETH

Confirm the complete order code and installed-system context before replacement.

Additional selection 03ABB TU520-ETHABB TU532-HABB TU542

Confirm the complete order code and installed-system context before replacement.

Additional selection 04GE IC695ACC402-AAGE IC695ALG600-CCGE IC695ALG608-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 05Siemens 6AV2124-0QC02-0AX2Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0

Confirm the complete order code and installed-system context before replacement.

Additional selection 06Siemens 6AV2125-2AE03-0AX0Siemens 6AV2125-2AE13-0AX0ABB DO525

Confirm the complete order code and installed-system context before replacement.

Additional selection 07ABB CM576-PNIOABB DI525ABB 3HAC14551-1/01C

Confirm the complete order code and installed-system context before replacement.

Additional selection 08ABB 3HAC025338-001ABB GJR2326500R1010 88VU01AABB GJR2370100R1000

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

IC694DSM324-BE Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order codeIC694DSM324-BE
2Capture the full nameplateFSSB servo interface; electronic cam-follower function; complete BE identity retained
3Record the installed contextFSSB servo interface; electronic cam-follower function; complete BE identity retained
4Verify interfaces and settingsFSSB servo interface; electronic cam-follower function; complete BE identity retained
5Plan commissioning checksFSSB servo interface; electronic cam-follower function; complete BE identity retained
6Request an exact-code quotationFSSB servo interface; electronic cam-follower function; complete BE identity retained

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for IC694DSM324-BE.

Company services

Exact-model checkReview IC694DSM324-BE, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

IC694DSM324-BE FAQ

What should engineers know about IC694DSM324-BE: what proves mechanical fit?

Controls up to four supported digital servo axes with motion-synchronous local logic. Compare module width, fixing points, terminal access, cable clearance and enclosure depth.

What should engineers know about IC694DSM324-BE: what proves electrical suitability?

Compare supply range, signal type, channel arrangement, load and isolation with the approved design.

What should engineers know about IC694DSM324-BE: what prevents wrong-revision delivery?

Keep the full ordering code on the quote and require a clear label image before shipment.

What should engineers know about IC694DSM324-BE: how should removed hardware be handled?

Label it, protect terminals and electronics, retain the fault record and keep it available until acceptance.

What should engineers know about IC694DSM324-BE: what is checked before final handover?

Verify documentation, backups, alarms, communication, functional results and maintenance acceptance.

What should engineers know about IC694DSM324-BE: why are model-specific faqs different?

Each question set emphasizes the signal, mounting, lifecycle or compatibility risks of the exact submitted item.

What should engineers know about IC694DSM324-BE: how is exact-model compatibility confirmed?

Match the complete code, host family, interface, mounting and approved project record before purchase.

What should engineers know about IC694DSM324-BE: why must the full suffix be retained?

A suffix can control hardware or lifecycle identity, so preserve it in the quotation, purchase order and receiving record.

What should engineers know about IC694DSM324-BE: what should be photographed before removal?

Capture the full nameplate, front connections, side labels, terminal positions and surrounding assembly.

What should engineers know about IC694DSM324-BE: what installation evidence is useful?

Record mounting, supply, grounding, field wiring, addressing and environmental conditions before disturbance.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
GE exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for IC694DSM324-BE.

Application areas

01Exact-code maintenanceControls up to four supported digital servo axes with motion-synchronous local logic
02Installed-system replacementFSSB servo interface; electronic cam-follower function; complete BE identity retained
03Shutdown spare planningKeep IC694DSM324-BE traceable through procurement and storage.
04Controlled receiving inspectionVerify label, connectors, condition and quantity before acceptance.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching IC694DSM324-BE?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp