other
Products
CJ1W-ID261 64-Point DC Input Unit
CJ1W-ID261 64-Point DC Input Unit
CJ1W-ID261 64-Point DC Input Unit

Omron CJ1W-ID261 64-Point DC Input Unit

EMAIL SALES
Omron official data reviewed
CJ1W-ID261 — 64-Point DC Input Unit

A 64-point 24 V DC input unit arranged as four 16-point commons and connected through a Fujitsu or OTAX multipole interface.

CJ-series Basic I/OHigh-density 24 V DC input collectionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerOmron
Documented familyCJ-series Basic I/O
Product form64-Point DC Input Unit
Primary functionHigh-density 24 V DC input collection
Input points64
Rated voltage24 V DC
Permissible voltage20.4–26.4 V DC
Input impedance5.6 kΩ
  • Brand:

    Others
  • Item NO.:

    CJ1W-ID261
  • Goods Stock:

    1
  • Part Number:

    CJ1W-ID261
  • Description:

    A 64-point 24 V DC input unit arranged as four 16-point commons and connected through a Fujitsu or OTAX multipole interface.
CJ1W-ID261 configuration inquiry

Get a precise quote for CJ1W-ID261

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CJ1W-ID261 official identification

A 64-point 24 V DC input unit arranged as four 16-point commons and connected through a Fujitsu or OTAX multipole interface.

System roleHigh-density 24 V DC input collection
Connection boundaryFujitsu or OTAX connector; four 16-point commons
Selection focusConfirm connector family, common grouping, input timing and current draw.
Release evidenceConnector part record, four-common map, 64-point stimulus test and filter setting

Engineering and installation checks

  • undefined
  • Preserve the four 16-point common groups when transferring field wiring.
  • Manufacturer verification basis: Omron CJ-series Basic I/O Unit specifications.
Official product data

CJ1W-ID261 key specifications

Input points 64
Rated voltage 24 V DC
Permissible voltage 20.4–26.4 V DC
Input impedance 5.6 kΩ
Typical input current 4.1 mA
ON threshold 19 V DC / 3 mA minimum
OFF threshold 5 V DC / 1 mA maximum
Response time 8 ms maximum, adjustable
Common grouping 16 points × 4
Internal current 90 mA maximum
Weight 110 g maximum

Source: Omron CJ-series Basic I/O Unit specifications.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CJ1W-ID261.

  • Preserve the four 16-point common groups when transferring field wiring.
  • Confirm the selected Fujitsu or OTAX mating connector and hood.
  • Set the input-response filter to the value used by the validated program.
  • Stimulate all 64 points and check channel order after connector insertion.
Record the as-found condition and the final connector part record, four-common map, 64-point stimulus test and filter setting
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CJ1W-ID261 before purchase approval.

Field supply
24 V DC within 20.4–26.4 V
Wiring density
64 points in four commons
Connector
Approved Fujitsu or OTAX type
Rack power
90 mA maximum internal current
Timing
Project response setting within the adjustable range
Final selection: Use only the values published for CJ1W-ID261 in Omron CJ-series Basic I/O Unit specifications; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Omron verified models 01CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 02CM598-CNDC562DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 03DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 04PM564-RP-ACATSA3S-0ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7654-7HC00-0XA0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CI592-CS31CM5640-2ETH20F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0620F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CJ1W-ID261 Order Guide

Use the complete Omron designation and installed hardware record for engineering review.
1Ordering identityCJ1W-ID261
2Official evidenceOmron CJ-series Basic I/O Unit specifications
3Installation surveyConfirm the selected Fujitsu or OTAX mating connector and hood.
4Compatibility gate24 V DC within 20.4–26.4 V
5Commissioning recordConnector part record, four-common map, 64-point stimulus test and filter setting
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CJ1W-ID261 source record named on this page.
Interface reviewFujitsu or OTAX connector; four 16-point commons
Receiving checkConfirm connector family, common grouping, input timing and current draw.
Release packageConnector part record, four-common map, 64-point stimulus test and filter setting

CJ1W-ID261 FAQ

How does input points limit a proposed CJ1W-ID261 64-Point DC Input Unit substitute?

Input points is published as 64 for the CJ-series Basic I/O. For dense machine sensors, preserve the four 16-point common groups when transferring field wiring. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How can a technician test CJ1W-ID261 64-Point DC Input Unit without exceeding the stated input impedance?

The official CJ1W-ID261 record gives input impedance as 5.6 kΩ for its 64-point dc input unit function. For large status marshalling, confirm the selected Fujitsu or OTAX mating connector and hood. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

When can the CJ1W-ID261 64-Point DC Input Unit off threshold entry be released for quotation?

For this high-density 24 v dc input collection selection, off threshold is 5 V DC / 1 mA maximum. For multi-station limit switches, set the input-response filter to the value used by the validated program. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How should engineers verify internal current before fitting CJ1W-ID261 64-Point DC Input Unit?

Use 90 mA maximum as the controlled internal current value in the CJ-series Basic I/O review. For connectorized cabinet retrofit, stimulate all 64 points and check channel order after connector insertion. Mark the evidence source and revision so future reviewers can reproduce the decision.

What installation decision is controlled by wiring density on CJ1W-ID261 64-Point DC Input Unit?

Wiring density is published as 64 points in four commons for the CJ-series Basic I/O. For dense machine sensors, preserve the four 16-point common groups when transferring field wiring. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

What commissioning check confirms the documented timing for CJ1W-ID261 64-Point DC Input Unit?

The official CJ1W-ID261 record gives timing as Project response setting within the adjustable range for its 64-point dc input unit function. For large status marshalling, confirm the selected Fujitsu or OTAX mating connector and hood. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

At which review gate should CJ1W-ID261 64-Point DC Input Unit permissible voltage be challenged?

For this high-density 24 v dc input collection selection, permissible voltage is 20.4–26.4 V DC. For multi-station limit switches, set the input-response filter to the value used by the validated program. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

Which drawing or schedule should carry the CJ1W-ID261 64-Point DC Input Unit on threshold record?

Use 19 V DC / 3 mA minimum as the controlled on threshold value in the CJ-series Basic I/O review. For connectorized cabinet retrofit, stimulate all 64 points and check channel order after connector insertion. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Which companion item must agree with common grouping for CJ1W-ID261 64-Point DC Input Unit?

Common grouping is published as 16 points × 4 for the CJ-series Basic I/O. For dense machine sensors, preserve the four 16-point common groups when transferring field wiring. Use the value as a selection boundary, not as a prediction of site performance.

How should a discrepancy in field supply be closed for CJ1W-ID261 64-Point DC Input Unit?

The official CJ1W-ID261 record gives field supply as 24 V DC within 20.4–26.4 V for its 64-point dc input unit function. For large status marshalling, confirm the selected Fujitsu or OTAX mating connector and hood. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
CJ-series Basic I/O application review

CJ1W-ID261 Applications

These contexts use the manufacturer-documented function of CJ1W-ID261; each requires a separate site-fit decision.

Application contexts

01 · Dense machine sensorsApply the documented high-density 24 v dc input collection only after confirming field supply as 24 V DC within 20.4–26.4 V.
02 · Large status marshallingApply the documented high-density 24 v dc input collection only after confirming wiring density as 64 points in four commons.
03 · Multi-station limit switchesApply the documented high-density 24 v dc input collection only after confirming connector as Approved Fujitsu or OTAX type.
04 · Connectorized cabinet retrofitApply the documented high-density 24 v dc input collection only after confirming rack power as 90 mA maximum internal current.

Why choose Nordwel

Traceable identityCJ1W-ID261 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to high-density 24 v dc input collection, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CJ1W-ID261, Fujitsu or OTAX connector; four 16-point commons, and the approved site record as three independent checks.
Need help matching this Omron configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp