other
Products
CJ1W-OD261 64-Point Sinking Transistor Output Unit
CJ1W-OD261 64-Point Sinking Transistor Output Unit
CJ1W-OD261 64-Point Sinking Transistor Output Unit

Omron CJ1W-OD261 64-Point Sinking Transistor Output Unit

EMAIL SALES
Omron official data reviewed
CJ1W-OD261 — 64-Point Sinking Transistor Output Unit

A 64-point sinking transistor output unit rated for 12–24 V DC loads and grouped for high-density connectorized control.

CJ-series Basic I/OHigh-density 12–24 V DC sinking output controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerOmron
Documented familyCJ-series Basic I/O
Product form64-Point Sinking Transistor Output Unit
Primary functionHigh-density 12–24 V DC sinking output control
Output points64
Output methodSinking transistor
Load voltage12–24 V DC
Permissible load range10.2–26.4 V DC
  • Brand:

    Others
  • Item NO.:

    CJ1W-OD261
  • Goods Stock:

    1
  • Part Number:

    CJ1W-OD261
  • Description:

    A 64-point sinking transistor output unit rated for 12–24 V DC loads and grouped for high-density connectorized control.
CJ1W-OD261 configuration inquiry

Get a precise quote for CJ1W-OD261

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CJ1W-OD261 official identification

A 64-point sinking transistor output unit rated for 12–24 V DC loads and grouped for high-density connectorized control.

System roleHigh-density 12–24 V DC sinking output control
Connection boundaryFujitsu or OTAX connector with external load supply
Selection focusCheck sinking polarity, per-point and per-common current, connector and external supply.
Release evidenceLoad schedule, common-current calculation, connector pin test and output-off leakage check

Engineering and installation checks

  • undefined
  • Group loads so no common exceeds the published 1.6 A limit.
  • Manufacturer verification basis: Omron CJ-series Transistor Output Units data sheet.
Official product data

CJ1W-OD261 key specifications

Output points 64
Output method Sinking transistor
Load voltage 12–24 V DC
Permissible load range 10.2–26.4 V DC
Current per point 0.3 A
Current per common 1.6 A
Current per unit 6.4 A
Inrush allowance 3 A for 10 ms per point
ON response 0.5 ms maximum
OFF response 1 ms maximum
Internal 5 V current 170 mA maximum
Weight 110 g maximum

Source: Omron CJ-series Transistor Output Units data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CJ1W-OD261.

  • Group loads so no common exceeds the published 1.6 A limit.
  • Observe sinking-output polarity at the Fujitsu or OTAX connector.
  • Provide the documented external 12–24 V DC load supply.
  • Test de-energized leakage and residual voltage on sensitive loads.
Record the as-found condition and the final load schedule, common-current calculation, connector pin test and output-off leakage check
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CJ1W-OD261 before purchase approval.

Load polarity
Sinking connection
Point demand
0.3 A maximum continuous
Common budget
1.6 A maximum
Unit budget
6.4 A maximum
Inrush profile
Not above 3 A for 10 ms per point
Final selection: Use only the values published for CJ1W-OD261 in Omron CJ-series Transistor Output Units data sheet; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Omron verified models 01CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 02DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 03PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Omron verified models 04ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02AO568CD522CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CI542-DPCI592-CS31CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CM582-DP20F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CJ1W-OD261 Order Guide

Use the complete Omron designation and installed hardware record for engineering review.
1Ordering identityCJ1W-OD261
2Official evidenceOmron CJ-series Transistor Output Units data sheet
3Installation surveyObserve sinking-output polarity at the Fujitsu or OTAX connector.
4Compatibility gateSinking connection
5Commissioning recordLoad schedule, common-current calculation, connector pin test and output-off leakage check
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CJ1W-OD261 source record named on this page.
Interface reviewFujitsu or OTAX connector with external load supply
Receiving checkCheck sinking polarity, per-point and per-common current, connector and external supply.
Release packageLoad schedule, common-current calculation, connector pin test and output-off leakage check

CJ1W-OD261 FAQ

How should a discrepancy in output points be closed for CJ1W-OD261 64-Point Sinking Transistor Output Unit?

The official CJ1W-OD261 record gives output points as 64 for its 64-point sinking transistor output unit function. For solenoid output banks, group loads so no common exceeds the published 1.6 A limit. Check the mating device, protective hardware and configured function before energization.

What receiving evidence is required for the permissible load range stated for CJ1W-OD261 64-Point Sinking Transistor Output Unit?

For this high-density 12–24 v dc sinking output control selection, permissible load range is 10.2–26.4 V DC. For indicator lamp arrays, observe sinking-output polarity at the Fujitsu or OTAX connector. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

How is current per unit separated from site-specific assumptions for CJ1W-OD261 64-Point Sinking Transistor Output Unit?

Use 6.4 A as the controlled current per unit value in the CJ-series Basic I/O review. For relay interface panels, provide the documented external 12–24 V DC load supply. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

How should off response be written in the purchase record for CJ1W-OD261 64-Point Sinking Transistor Output Unit?

OFF response is published as 1 ms maximum for the CJ-series Basic I/O. For fast connectorized sequencing, test de-energized leakage and residual voltage on sensitive loads. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

What field observation validates load polarity for CJ1W-OD261 64-Point Sinking Transistor Output Unit?

The official CJ1W-OD261 record gives load polarity as Sinking connection for its 64-point sinking transistor output unit function. For solenoid output banks, group loads so no common exceeds the published 1.6 A limit. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What fault could result from misreading unit budget on CJ1W-OD261 64-Point Sinking Transistor Output Unit?

For this high-density 12–24 v dc sinking output control selection, unit budget is 6.4 A maximum. For indicator lamp arrays, observe sinking-output polarity at the Fujitsu or OTAX connector. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves output method on received CJ1W-OD261 64-Point Sinking Transistor Output Unit?

Use Sinking transistor as the controlled output method value in the CJ-series Basic I/O review. For relay interface panels, provide the documented external 12–24 V DC load supply. Release is appropriate only when the manufacturer value and the project requirement agree.

Which current per point value identifies the reviewed CJ1W-OD261 64-Point Sinking Transistor Output Unit configuration?

Current per point is published as 0.3 A for the CJ-series Basic I/O. For fast connectorized sequencing, test de-energized leakage and residual voltage on sensitive loads. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does inrush allowance matter when selecting CJ1W-OD261 64-Point Sinking Transistor Output Unit?

The official CJ1W-OD261 record gives inrush allowance as 3 A for 10 ms per point for its 64-point sinking transistor output unit function. For solenoid output banks, group loads so no common exceeds the published 1.6 A limit. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving internal 5 v current should stop approval of CJ1W-OD261 64-Point Sinking Transistor Output Unit?

For this high-density 12–24 v dc sinking output control selection, internal 5 v current is 170 mA maximum. For indicator lamp arrays, observe sinking-output polarity at the Fujitsu or OTAX connector. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
CJ-series Basic I/O application review

CJ1W-OD261 Applications

These contexts use the manufacturer-documented function of CJ1W-OD261; each requires a separate site-fit decision.

Application contexts

01 · Solenoid output banksApply the documented high-density 12–24 v dc sinking output control only after confirming load polarity as Sinking connection.
02 · Indicator lamp arraysApply the documented high-density 12–24 v dc sinking output control only after confirming point demand as 0.3 A maximum continuous.
03 · Relay interface panelsApply the documented high-density 12–24 v dc sinking output control only after confirming common budget as 1.6 A maximum.
04 · Fast connectorized sequencingApply the documented high-density 12–24 v dc sinking output control only after confirming unit budget as 6.4 A maximum.

Why choose Nordwel

Traceable identityCJ1W-OD261 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to high-density 12–24 v dc sinking output control, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CJ1W-OD261, Fujitsu or OTAX connector with external load supply, and the approved site record as three independent checks.
Need help matching this Omron configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp