other
Products
D-M9NW Two-Color NPN Solid-State Auto Switch
D-M9NW Two-Color NPN Solid-State Auto Switch
D-M9NW Two-Color NPN Solid-State Auto Switch

SMC D-M9NW Two-Color NPN Solid-State Auto Switch

EMAIL SALES
SMC official data reviewed
D-M9NW — Two-Color NPN Solid-State Auto Switch

A direct-mount solid-state auto switch with NPN output and two-color indication for operating and proper detection ranges.

SMC D-M9 SeriesPneumatic actuator position detection with proper-range indicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSMC
Documented familySMC D-M9 Series
Product formTwo-Color NPN Solid-State Auto Switch
Primary functionPneumatic actuator position detection with proper-range indication
Output circuit3-wire NPN
Supply range4.5–28 V DC
Nominal voltages5 / 12 / 24 V DC
Current consumption10 mA maximum
  • Brand:

    Others
  • Item NO.:

    D-M9NW
  • Goods Stock:

    1
  • Part Number:

    D-M9NW
  • Description:

    A direct-mount solid-state auto switch with NPN output and two-color indication for operating and proper detection ranges.
D-M9NW configuration inquiry

Get a precise quote for D-M9NW

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

D-M9NW official identification

A direct-mount solid-state auto switch with NPN output and two-color indication for operating and proper detection ranges.

System rolePneumatic actuator position detection with proper-range indication
Connection boundaryThree-wire NPN cable, in-line entry
Selection focusConfirm NPN input compatibility, cable direction, applied voltage and switch mounting groove.
Release evidenceWiring-color check, green proper-range indication, load-current test and repeatability cycle

Engineering and installation checks

  • undefined
  • Match the actuator’s direct-mount groove and approved fastening method.
  • Manufacturer verification basis: SMC D-M9NW Web Catalog and Solid State Auto Switch catalog.
Official product data

D-M9NW key specifications

Output circuit 3-wire NPN
Supply range 4.5–28 V DC
Nominal voltages 5 / 12 / 24 V DC
Current consumption 10 mA maximum
Load voltage 28 V DC maximum
Load current 40 mA maximum
Internal drop 0.8 V at 10 mA maximum
Leakage current 100 µA maximum at 24 V
Indication Red operating / green proper range
Cable entry In line
Standard lead length 0.5 m
Approximate mass 8 g

Source: SMC D-M9NW Web Catalog and Solid State Auto Switch catalog.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of D-M9NW.

  • Match the actuator’s direct-mount groove and approved fastening method.
  • Wire the three conductors to an NPN-compatible input circuit.
  • Adjust the switch until green proper-range indication is obtained.
  • Flex the lead only within the cable-routing limits and provide strain relief.
Record the as-found condition and the final wiring-color check, green proper-range indication, load-current test and repeatability cycle
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for D-M9NW before purchase approval.

Controller input
NPN compatible
Supply
4.5–28 V DC
Load
Not above 40 mA or 28 V DC
Mechanical fit
Documented direct-mount actuator groove
Position setting
Green indication within the proper operating range
Final selection: Use only the values published for D-M9NW in SMC D-M9NW Web Catalog and Solid State Auto Switch catalog; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

SMC verified models 01DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 02PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 03ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SMC verified models 0420F11RC015JA0NNNNN6ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7518-4UP00-0AB06ES7551-1AB00-0AB06ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7654-7HC00-0XA0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

D-M9NW Order Guide

Use the complete SMC designation and installed hardware record for engineering review.
1Ordering identityD-M9NW
2Official evidenceSMC D-M9NW Web Catalog and Solid State Auto Switch catalog
3Installation surveyWire the three conductors to an NPN-compatible input circuit.
4Compatibility gateNPN compatible
5Commissioning recordWiring-color check, green proper-range indication, load-current test and repeatability cycle
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact D-M9NW source record named on this page.
Interface reviewThree-wire NPN cable, in-line entry
Receiving checkConfirm NPN input compatibility, cable direction, applied voltage and switch mounting groove.
Release packageWiring-color check, green proper-range indication, load-current test and repeatability cycle

D-M9NW FAQ

Which current consumption value identifies the reviewed D-M9NW Two-Color NPN Solid-State Auto Switch configuration?

Current consumption is published as 10 mA maximum for the SMC D-M9 Series. For cylinder end-position sensing, match the actuator’s direct-mount groove and approved fastening method. Log the comparison against the controlled parts list before the item enters the cabinet.

Why does internal drop matter when selecting D-M9NW Two-Color NPN Solid-State Auto Switch?

The official D-M9NW record gives internal drop as 0.8 V at 10 mA maximum for its two-color npn solid-state auto switch function. For gripper jaw confirmation, wire the three conductors to an NPN-compatible input circuit. Check the mating device, protective hardware and configured function before energization.

Which mismatch involving cable entry should stop approval of D-M9NW Two-Color NPN Solid-State Auto Switch?

For this pneumatic actuator position detection with proper-range indication selection, cable entry is In line. For compact slide detection, adjust the switch until green proper-range indication is obtained. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

What maintenance record preserves the controller input evidence for D-M9NW Two-Color NPN Solid-State Auto Switch?

Use NPN compatible as the controlled controller input value in the SMC D-M9 Series review. For two-color setup verification, flex the lead only within the cable-routing limits and provide strain relief. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

How does mechanical fit limit a proposed D-M9NW Two-Color NPN Solid-State Auto Switch substitute?

Mechanical fit is published as Documented direct-mount actuator groove for the SMC D-M9 Series. For cylinder end-position sensing, match the actuator’s direct-mount groove and approved fastening method. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How can a technician test D-M9NW Two-Color NPN Solid-State Auto Switch without exceeding the stated supply range?

The official D-M9NW record gives supply range as 4.5–28 V DC for its two-color npn solid-state auto switch function. For gripper jaw confirmation, wire the three conductors to an NPN-compatible input circuit. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

When can the D-M9NW Two-Color NPN Solid-State Auto Switch load voltage entry be released for quotation?

For this pneumatic actuator position detection with proper-range indication selection, load voltage is 28 V DC maximum. For compact slide detection, adjust the switch until green proper-range indication is obtained. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How should engineers verify leakage current before fitting D-M9NW Two-Color NPN Solid-State Auto Switch?

Use 100 µA maximum at 24 V as the controlled leakage current value in the SMC D-M9 Series review. For two-color setup verification, flex the lead only within the cable-routing limits and provide strain relief. Release is appropriate only when the manufacturer value and the project requirement agree.

What installation decision is controlled by standard lead length on D-M9NW Two-Color NPN Solid-State Auto Switch?

Standard lead length is published as 0.5 m for the SMC D-M9 Series. For cylinder end-position sensing, match the actuator’s direct-mount groove and approved fastening method. A substitution review must close functional, mechanical, electrical and environmental differences independently.

What commissioning check confirms the documented supply for D-M9NW Two-Color NPN Solid-State Auto Switch?

The official D-M9NW record gives supply as 4.5–28 V DC for its two-color npn solid-state auto switch function. For gripper jaw confirmation, wire the three conductors to an NPN-compatible input circuit. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SMC D-M9 Series application review

D-M9NW Applications

These contexts use the manufacturer-documented function of D-M9NW; each requires a separate site-fit decision.

Application contexts

01 · Cylinder end-position sensingApply the documented pneumatic actuator position detection with proper-range indication only after confirming controller input as NPN compatible.
02 · Gripper jaw confirmationApply the documented pneumatic actuator position detection with proper-range indication only after confirming supply as 4.5–28 V DC.
03 · Compact slide detectionApply the documented pneumatic actuator position detection with proper-range indication only after confirming load as Not above 40 mA or 28 V DC.
04 · Two-color setup verificationApply the documented pneumatic actuator position detection with proper-range indication only after confirming mechanical fit as Documented direct-mount actuator groove.

Why choose Nordwel

Traceable identityD-M9NW remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to pneumatic actuator position detection with proper-range indication, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain D-M9NW, Three-wire NPN cable, in-line entry, and the approved site record as three independent checks.
Need help matching this SMC configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp