other
Products
CP-246 Solar Automatic Cable Stripper
CP-246 Solar Automatic Cable Stripper
CP-246 Solar Automatic Cable Stripper

Pro’sKit CP-246 Solar Automatic Cable Stripper

EMAIL SALES
Pro’sKit official data reviewed
CP-246 — Solar Automatic Cable Stripper

A 177 mm automatic cable stripper for 2.5, 4 and 6 mm² photovoltaic conductors, built with an SK5 blade and zinc-alloy body.

Pro’sKit Solar ToolingControlled stripping of photovoltaic cableExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerPro’sKit
Documented familyPro’sKit Solar Tooling
Product formSolar Automatic Cable Stripper
Primary functionControlled stripping of photovoltaic cable
Cable sizes2.5 / 4 / 6 mm²
AWG equivalents14 / 12 / 10
Overall length177 mm
Blade materialSK5
  • Brand:

    Others
  • Item NO.:

    CP-246
  • Goods Stock:

    1
  • Part Number:

    CP-246
  • Description:

    A 177 mm automatic cable stripper for 2.5, 4 and 6 mm² photovoltaic conductors, built with an SK5 blade and zinc-alloy body.
CP-246 configuration inquiry

Get a precise quote for CP-246

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CP-246 official identification

A 177 mm automatic cable stripper for 2.5, 4 and 6 mm² photovoltaic conductors, built with an SK5 blade and zinc-alloy body.

System roleControlled stripping of photovoltaic cable
Connection boundaryThree fixed conductor-size positions with adjustable strip-length stop
Selection focusMatch conductor cross-section and required strip length to the tool’s defined positions.
Release evidenceTool marking, blade condition, trial strip, conductor inspection and stop setting

Engineering and installation checks

  • undefined
  • Select the jaw position matching the conductor cross-section.
  • Manufacturer verification basis: Pro’sKit CP-246 official product record.
Official product data

CP-246 key specifications

Cable sizes 2.5 / 4 / 6 mm²
AWG equivalents 14 / 12 / 10
Overall length 177 mm
Blade material SK5
Blade hardness 56 ±2 HRC
Body material Zinc alloy
Handle material TPR
Length stop Adjustable
Package Blister card

Source: Pro’sKit CP-246 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CP-246.

  • Select the jaw position matching the conductor cross-section.
  • Set the length stop on a sample before processing production cables.
  • Inspect the SK5 cutting edges for chips or contamination.
  • Reject any strip that nicks strands or deforms the insulation boundary.
Record the as-found condition and the final tool marking, blade condition, trial strip, conductor inspection and stop setting
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CP-246 before purchase approval.

Conductor range
2.5, 4 or 6 mm²
Equivalent sizes
AWG 14, 12 or 10
Cable purpose
Photovoltaic cable preparation
Strip control
Adjustable stop
Acceptance
No damaged strands after trial strip
Final selection: Use only the values published for CP-246 in Pro’sKit CP-246 official product record; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Pro’sKit verified models 01CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Pro’sKit verified models 02DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Pro’sKit verified models 03PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Pro’sKit verified models 04ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 066ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 076ES7521-7EH00-0AB06ES7414-3FM07-0AB06ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7654-7HB00-0XA06ES7654-7HC00-0XA0AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CP-246 Order Guide

Use the complete Pro’sKit designation and installed hardware record for engineering review.
1Ordering identityCP-246
2Official evidencePro’sKit CP-246 official product record
3Installation surveySet the length stop on a sample before processing production cables.
4Compatibility gate2.5, 4 or 6 mm²
5Commissioning recordTool marking, blade condition, trial strip, conductor inspection and stop setting
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CP-246 source record named on this page.
Interface reviewThree fixed conductor-size positions with adjustable strip-length stop
Receiving checkMatch conductor cross-section and required strip length to the tool’s defined positions.
Release packageTool marking, blade condition, trial strip, conductor inspection and stop setting

CP-246 FAQ

Which mismatch involving blade hardness should stop approval of CP-246 Solar Automatic Cable Stripper?

For this controlled stripping of photovoltaic cable selection, blade hardness is 56 ±2 HRC. For pv connector preparation, select the jaw position matching the conductor cross-section. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

What maintenance record preserves the length stop evidence for CP-246 Solar Automatic Cable Stripper?

Use Adjustable as the controlled length stop value in the Pro’sKit Solar Tooling review. For solar string harness assembly, set the length stop on a sample before processing production cables. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How does equivalent sizes limit a proposed CP-246 Solar Automatic Cable Stripper substitute?

Equivalent sizes is published as AWG 14, 12 or 10 for the Pro’sKit Solar Tooling. For field cable repair, inspect the SK5 cutting edges for chips or contamination. Use the value as a selection boundary, not as a prediction of site performance.

How can a technician test CP-246 Solar Automatic Cable Stripper without exceeding the stated acceptance?

The official CP-246 record gives acceptance as No damaged strands after trial strip for its solar automatic cable stripper function. For panel-shop photovoltaic wiring, reject any strip that nicks strands or deforms the insulation boundary. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

When can the CP-246 Solar Automatic Cable Stripper overall length entry be released for quotation?

For this controlled stripping of photovoltaic cable selection, overall length is 177 mm. For pv connector preparation, select the jaw position matching the conductor cross-section. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

How should engineers verify body material before fitting CP-246 Solar Automatic Cable Stripper?

Use Zinc alloy as the controlled body material value in the Pro’sKit Solar Tooling review. For solar string harness assembly, set the length stop on a sample before processing production cables. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by package on CP-246 Solar Automatic Cable Stripper?

Package is published as Blister card for the Pro’sKit Solar Tooling. For field cable repair, inspect the SK5 cutting edges for chips or contamination. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented cable purpose for CP-246 Solar Automatic Cable Stripper?

The official CP-246 record gives cable purpose as Photovoltaic cable preparation for its solar automatic cable stripper function. For panel-shop photovoltaic wiring, reject any strip that nicks strands or deforms the insulation boundary. Check the mating device, protective hardware and configured function before energization.

At which review gate should CP-246 Solar Automatic Cable Stripper cable sizes be challenged?

For this controlled stripping of photovoltaic cable selection, cable sizes is 2.5 / 4 / 6 mm². For pv connector preparation, select the jaw position matching the conductor cross-section. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the CP-246 Solar Automatic Cable Stripper blade material record?

Use SK5 as the controlled blade material value in the Pro’sKit Solar Tooling review. For solar string harness assembly, set the length stop on a sample before processing production cables. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Pro’sKit Solar Tooling application review

CP-246 Applications

These contexts use the manufacturer-documented function of CP-246; each requires a separate site-fit decision.

Application contexts

01 · PV connector preparationApply the documented controlled stripping of photovoltaic cable only after confirming conductor range as 2.5, 4 or 6 mm².
02 · Solar string harness assemblyApply the documented controlled stripping of photovoltaic cable only after confirming equivalent sizes as AWG 14, 12 or 10.
03 · Field cable repairApply the documented controlled stripping of photovoltaic cable only after confirming cable purpose as Photovoltaic cable preparation.
04 · Panel-shop photovoltaic wiringApply the documented controlled stripping of photovoltaic cable only after confirming strip control as Adjustable stop.

Why choose Nordwel

Traceable identityCP-246 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to controlled stripping of photovoltaic cable, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CP-246, Three fixed conductor-size positions with adjustable strip-length stop, and the approved site record as three independent checks.
Need help matching this Pro’sKit configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp