other
Products
KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card
KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card
KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card

Emerson KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card

EMAIL SALES
Emerson official data reviewed
KJ3202X1-BK1 — 8-Channel 24 V DC High-Side Output Card

KJ3202X1-BK1 is the manufacturer-identified 8-channel 24 v dc high-side output card with the documented electrical boundary shown below.

DeltaV S-series I/OEight-channel high-side load switchingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV S-series I/O
Product form8-Channel 24 V DC High-Side Output Card
Primary functionEight-channel high-side load switching
Exact designationKJ3202X1-BK1
Official instruction IDATEX exact-model instructions
Local bus input12 V DC at 150 mA
Field-circuit limit30 V DC at 1 A per channel; 3 A per card
  • Brand:

    Emerson
  • Item NO.:

    KJ3202X1-BK1
  • Goods Stock:

    1
  • Part Number:

    KJ3202X1-BK1
  • Description:

    KJ3202X1-BK1 is the manufacturer-identified 8-channel 24 v dc high-side output card with the documented electrical boundary shown below.
KJ3202X1-BK1 configuration inquiry

Get a precise quote for KJ3202X1-BK1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

KJ3202X1-BK1 official identification

KJ3202X1-BK1 is the manufacturer-identified 8-channel 24 v dc high-side output card with the documented electrical boundary shown below.

System roleEight-channel high-side load switching
Connection boundary8 outputs; 24 V DC nominal high-side circuits
Selection focusMatch ATEX exact-model instructions, 30 V DC at 1 A per channel; 3 A per card and the installed carrier position before release.
Release evidenceKJ3202X1-BK1 marking, keyed-position record, field-circuit check and point-by-point functional result

Engineering and installation checks

  • undefined
  • Verify the KJ3202X1-BK1 marking and keyed carrier position before insertion.
  • Manufacturer verification basis: Emerson KJ3202X1-BK1 official ATEX installation instructions.
Official product data

KJ3202X1-BK1 key specifications

Exact designation KJ3202X1-BK1
Manufacturer description 8-Channel 24 V DC High-Side Output Card
Official instruction ID ATEX exact-model instructions
Local bus input 12 V DC at 150 mA
Field-circuit limit 30 V DC at 1 A per channel; 3 A per card
Ambient temperature −40 to +70 °C
Humidity 5–95%, non-condensing
Airborne contaminants ISA-S71.04 G3
Ingress protection IP20

Source: Emerson KJ3202X1-BK1 official ATEX installation instructions.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of KJ3202X1-BK1.

  • Verify the KJ3202X1-BK1 marking and keyed carrier position before insertion.
  • Isolate the field circuit and keep it within 30 V DC at 1 A per channel; 3 A per card.
  • Maintain the published −40 to +70 °C ambient and IP20 cabinet boundary.
  • Exercise every assigned channel and retain the observed state in the commissioning record.
Record the as-found condition and the final kj3202x1-bk1 marking, keyed-position record, field-circuit check and point-by-point functional result
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for KJ3202X1-BK1 before purchase approval.

Ordering identity
KJ3202X1-BK1
Manufacturer description
8-Channel 24 V DC High-Side Output Card
Carrier position
Match installed keying
Electrical boundary
30 V DC at 1 A per channel; 3 A per card
Environmental envelope
−40 to +70 °C; IP20
Final selection: Use only the values published for KJ3202X1-BK1 in Emerson KJ3202X1-BK1 official ATEX installation instructions; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson CE4032S1T2B8Emerson CE4033S2B10Emerson CE4036P2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CS6002Emerson 333UEmerson CE4001S2T1B1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson CE4001S2T2B7Emerson CE4002S1T2B6Emerson CE4002S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CE4003S2B10Emerson CE4003S2B9Emerson CE4031S2T2B6

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB AC522ABB AI563ABB AO522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB AO562ABB AO568ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CI504-PNIOABB CI506-PNIOABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CI542-DPABB CI582-CNABB CI590-CS31-HA

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB CI592-CS31ABB CM5640-2ETHABB CM579-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CM597-ETHABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB DI572ABB DO526ABB DO571

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

KJ3202X1-BK1 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityKJ3202X1-BK1
2Official evidenceEmerson KJ3202X1-BK1 official ATEX installation instructions
3Installation surveyIsolate the field circuit and keep it within 30 V DC at 1 A per channel; 3 A per card.
4Compatibility gateKJ3202X1-BK1
5Commissioning recordKJ3202X1-BK1 marking, keyed-position record, field-circuit check and point-by-point functional result
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact KJ3202X1-BK1 source record named on this page.
Interface review8 outputs; 24 V DC nominal high-side circuits
Receiving checkMatch ATEX exact-model instructions, 30 V DC at 1 A per channel; 3 A per card and the installed carrier position before release.
Release packageKJ3202X1-BK1 marking, keyed-position record, field-circuit check and point-by-point functional result

KJ3202X1-BK1 FAQ

Which companion item must agree with ingress protection for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

Ingress protection is published as IP20 for the DeltaV S-series I/O. For solenoid group control, verify the KJ3202X1-BK1 marking and keyed carrier position before insertion. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval. Record checkpoint 1 in the eight-load switching package.

How should a discrepancy in carrier position be closed for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

The official KJ3202X1-BK1 record gives carrier position as Match installed keying for its 8-channel 24 v dc high-side output card function. For relay-coil switching, isolate the field circuit and keep it within 30 V DC at 1 A per channel; 3 A per card. Test at a safe initial condition, then progress to the operating point defined by the approved procedure. Record checkpoint 2 in the eight-load switching package.

What receiving evidence is required for the exact designation stated for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

For this eight-channel high-side load switching selection, exact designation is KJ3202X1-BK1. For eight-point output retrofit, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim. Record checkpoint 3 in the eight-load switching package.

How is local bus input separated from site-specific assumptions for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

Use 12 V DC at 150 mA as the controlled local bus input value in the DeltaV S-series I/O review. For s-series load actuation, exercise every assigned channel and retain the observed state in the commissioning record. Release is appropriate only when the manufacturer value and the project requirement agree. Record checkpoint 4 in the eight-load switching package.

How should humidity be written in the purchase record for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

Humidity is published as 5–95%, non-condensing for the DeltaV S-series I/O. For solenoid group control, verify the KJ3202X1-BK1 marking and keyed carrier position before insertion. A substitution review must close functional, mechanical, electrical and environmental differences independently. Record checkpoint 5 in the eight-load switching package.

What field observation validates ordering identity for KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

The official KJ3202X1-BK1 record gives ordering identity as KJ3202X1-BK1 for its 8-channel 24 v dc high-side output card function. For relay-coil switching, isolate the field circuit and keep it within 30 V DC at 1 A per channel; 3 A per card. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed. Record checkpoint 6 in the eight-load switching package.

What fault could result from misreading electrical boundary on KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

For this eight-channel high-side load switching selection, electrical boundary is 30 V DC at 1 A per channel; 3 A per card. For eight-point output retrofit, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence. Record checkpoint 7 in the eight-load switching package.

What photograph or measurement proves manufacturer description on received KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

Use 8-Channel 24 V DC High-Side Output Card as the controlled manufacturer description value in the DeltaV S-series I/O review. For s-series load actuation, exercise every assigned channel and retain the observed state in the commissioning record. Mark the evidence source and revision so future reviewers can reproduce the decision. Record checkpoint 8 in the eight-load switching package.

Which field-circuit limit value identifies the reviewed KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card configuration during eight-load switching?

Field-circuit limit is published as 30 V DC at 1 A per channel; 3 A per card for the DeltaV S-series I/O. For solenoid group control, verify the KJ3202X1-BK1 marking and keyed carrier position before insertion. Any mismatch requires an engineering disposition rather than an undocumented field adaptation. Record checkpoint 9 in the eight-load switching package.

Why does airborne contaminants matter when selecting KJ3202X1-BK1 8-Channel 24 V DC High-Side Output Card during eight-load switching?

The official KJ3202X1-BK1 record gives airborne contaminants as ISA-S71.04 G3 for its 8-channel 24 v dc high-side output card function. For relay-coil switching, isolate the field circuit and keep it within 30 V DC at 1 A per channel; 3 A per card. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request. Record checkpoint 10 in the eight-load switching package.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV S-series I/O application review

KJ3202X1-BK1 Applications

These contexts use the manufacturer-documented function of KJ3202X1-BK1; each requires a separate site-fit decision.

Application contexts

01 · Solenoid group controlApply the documented eight-channel high-side load switching only after confirming ordering identity as KJ3202X1-BK1.
02 · Relay-coil switchingApply the documented eight-channel high-side load switching only after confirming manufacturer description as 8-Channel 24 V DC High-Side Output Card.
03 · Eight-point output retrofitApply the documented eight-channel high-side load switching only after confirming carrier position as Match installed keying.
04 · S-series load actuationApply the documented eight-channel high-side load switching only after confirming electrical boundary as 30 V DC at 1 A per channel; 3 A per card.

Why choose Nordwel

Traceable identityKJ3202X1-BK1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to eight-channel high-side load switching, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain KJ3202X1-BK1, 8 outputs; 24 V DC nominal high-side circuits, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp