other
Products
160273 YSR-25-40-C Self-Adjusting Shock Absorber
160273 YSR-25-40-C Self-Adjusting Shock Absorber
160273 YSR-25-40-C Self-Adjusting Shock Absorber

Festo 160273 YSR-25-40-C Self-Adjusting Shock Absorber

EMAIL SALES
Festo official data reviewed
160273 — YSR-25-40-C Self-Adjusting Shock Absorber

Festo part 160273 is the YSR-25-40-C self-adjusting shock absorber with a 40 mm stroke, any-position mounting and published energy and temperature limits.

Festo YSR cushioning componentEnd-position kinetic-energy absorptionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerFesto
Exact part160273
Type codeYSR-25-40-C
Motion functionUnidirectional cushioning
Stroke40 mm
Maximum impact3 m/s
Hourly energy limit150,000 J
Mounting freedomAny position
  • Brand:

    Others
  • Item NO.:

    160273
  • Goods Stock:

    1
  • Part Number:

    160273
  • Description:

    Festo part 160273 is the YSR-25-40-C self-adjusting shock absorber with a 40 mm stroke, any-position mounting and published energy and temperature limits.
160273 configuration inquiry

Get a precise quote for 160273

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

160273 official identification

Festo part 160273 is the YSR-25-40-C self-adjusting shock absorber with a 40 mm stroke, any-position mounting and published energy and temperature limits.

Absorber size25
Reset at room temperature0.4 s
Maximum stop force4000 N
FasteningCounter nut

Engineering and installation checks

  • Keep the complete designation 160273 in the quotation and receiving record.
  • Align the piston rod with the impact direction and prevent side load.
  • Manufacturer verification basis: Festo official data sheet for part number 160273.
Official product data

160273 key specifications

Part number 160273
Type YSR-25-40-C
Size 25
Stroke 40 mm
Cushioning Self-adjusting
Mounting position Any
Maximum impact speed 3 m/s
Maximum energy / stroke 160 J
Maximum energy / hour 150,000 J
Reset time at room temperature 0.4 s
Ambient temperature -10…80 °C
Maximum stop force 4000 N
Product weight 600 g

Source: Festo official data sheet for part number 160273.

Pre-order check 01

Installation environment

Prepare 160273 by documenting align the piston rod with the impact direction and prevent side load, then keep every observation tied to the exact inquiry identity.

  • Align the piston rod with the impact direction and prevent side load.
  • Set the 40 mm working stroke without using the absorber as an uncontrolled hard stop.
  • Lock the body with the specified counter-nut arrangement.
  • Keep the surrounding temperature between -10 °C and 80 °C.
The installation file for 160273 must retain the as-found record, the controlled change and the final mechanical stop survey, impact test and temperature record.
Pre-order check 02

Compatibility confirmation

Approve 160273 only after impact velocity, single-event energy and hourly accumulation have separate evidence.

Impact velocity
No more than 3 m/s
Single-event energy
No more than 160 J
Hourly accumulation
No more than 150,000 J
Moving mass
Load case evaluated around the published 200 kg mass range
Cycle recovery
At least the temperature-dependent reset interval
Final selection: Use the official Festo limits for part 160273 only; the machine designer remains responsible for load case, stop geometry and safety margin.
Recommended model families

More verified automation models

Festo verified models 01AI563AO568CD522

Compare linked models by impact velocity.

Festo verified models 02CI541-DPCI542-DPCI592-CS31

Keep single-event energy as a separate decision.

Festo verified models 03CM5640-2ETHCM582-DPCM588-CN

Do not merge hourly accumulation with identity evidence.

Festo verified models 04CM589-PNIOCM598-CNDC562

Release 160273 only with mechanical stop survey, impact test and temperature record.

Additional published brands

Additional Advantage Models

Tiffany verified models 01DO526DO572PM5032-R-ETH

Use conveyor end-stop cushioning as the first comparison lens.

Tiffany verified models 02PM5072-T-2ETHPM564-RP-ACATSA3S-0

Review slide deceleration without borrowing ratings.

Tiffany verified models 03ATSS3D-06ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Treat handling-axis impact control as project-controlled evidence.

Tiffany verified models 046ES7414-2XG02-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Close machine-door motion damping before ordering.

Tiffany verified models 056ES7517-3UP00-0AB06ES7518-4UP00-0AB0TU532

Align the piston rod with the impact direction and prevent side load.

Tiffany verified models 06CI522-MODTCPCM577-ETHGT2-H32

Set the 40 mm working stroke without using the absorber as an uncontrolled hard stop.

Tiffany verified models 07VE3009VE3011VE3012

Lock the body with the specified counter-nut arrangement.

Tiffany verified models 08VE3051C1VE3051C2VE3051C3

Keep the surrounding temperature between -10 °C and 80 °C.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

160273 Order Guide

Use the complete Festo designation and installed hardware record for engineering review.
1Controlled identityEnter 160273 exactly as supplied.
2Impact velocityNo more than 3 m/s
3Single-event energyNo more than 160 J
4Hourly accumulationNo more than 150,000 J
5Release evidenceMechanical stop survey, impact test and temperature record
6Manufacturer basisFesto official data sheet for part number 160273

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for 160273 is organized around size 25, 40 mm stroke, self-adjusting action, with unresolved values held outside the quotation decision.

Support scope

Impact velocity reviewNo more than 3 m/s is checked against the exact identity.
Single-event energy reviewNo more than 160 J is assigned to a named evidence owner.
Hourly accumulation reviewNo more than 150,000 J is closed before technical release.
Commercial handoffQuantity and destination are added only after mechanical stop survey, impact test and temperature record.

160273 FAQ

What is the full Festo identity behind part 160273?

The official data sheet identifies 160273 as type YSR-25-40-C, size 25, with 40 mm stroke.

Can this absorber be mounted horizontally or vertically?

Yes. Festo lists any mounting position, provided impact alignment and mechanical support remain correct.

What is the maximum published impact speed?

The data sheet states 3 m/s; calculate the actual moving mass and energy rather than checking speed alone.

How much energy may one stroke absorb?

The published maximum is 160 J per stroke, subject to the full application and temperature conditions.

Why is the hourly energy limit important?

Repeated impacts generate heat, so the accumulated load must remain below 150,000 J per hour as well as the single-stroke limit.

What reset time should a cycle study use?

At room temperature the published reset time is 0.4 s; the minimum-temperature value is longer and must be considered for cold operation.

Which ambient range is documented?

The official range is -10 °C to 80 °C, while nearby heat sources and trapped air still require a site check.

How should the 4000 N stop force be interpreted?

It is a published maximum limit, not a target setting; the machine structure and mounting must tolerate the calculated reaction with margin.

What prevents premature rod or seal wear?

Maintain axial impact, avoid side loading, keep contaminants away from the rod and inspect alignment after any stop adjustment.

What evidence closes replacement commissioning?

Record type code, mounting, stroke use, impact speed, calculated energy, cycle rate, temperature and observed stopping behavior.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Festo YSR cushioning component application review

160273 Applications

These use contexts organize the end-position kinetic-energy absorption review for 160273; they do not extend the manufacturer-data boundary.

Application contexts

01 · Conveyor end-stop cushioningCalculate product and carrier kinetic energy at maximum line speed.
02 · Slide decelerationCheck alignment over the complete guided slide stroke.
03 · Handling-axis impact controlVerify repeated impacts remain inside the hourly thermal budget.
04 · Machine-door motion dampingPrevent rebound and inspect the mechanical stop after adjustment.

Why choose Nordwel

Impact velocity disciplineNo more than 3 m/s is kept as an independent acceptance item for 160273.
Single-event energy traceabilityNo more than 160 J remains visible from inquiry through commissioning.
Handling-axis impact control controlThe review closes the stated application evidence before release.
Machine-door motion damping handoffTiffany Guan coordinates quantity, destination and the completed technical record.
Selection boundary for 160273: Use the official Festo limits for part 160273 only; the machine designer remains responsible for load case, stop geometry and safety margin.
Need Tiffany to coordinate the calculate impact energy, moving mass and reset interval.CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp