other
Products
ICS Triplex TC-306-02 Trusted Input Smart Slot Jumper Cable product image
ICS Triplex TC-306-02 Trusted Input Smart Slot Jumper Cable product image
ICS Triplex TC-306-02 Trusted Input Smart Slot Jumper Cable product image

ICS Triplex TC-306-02 Trusted Input Smart Slot Jumper Cable

EMAIL SALES
Manufacturer data reviewed
TC-306-02 — Trusted Input Smart Slot Jumper Cable

Provides a same-bay Smart Slot link for Trusted input. Match both cable endpoints before installation.

ICS TriplexTrusted Smart Slot Jumper CablesExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
TC-306-02 verified profile
ManufacturerICS Triplex
Exact modelTC-306-02
Product typeTrusted Input Smart Slot Jumper Cable
Product familyTrusted Smart Slot Jumper Cables
Primary roleSmart Slot jumper link
Interface contextTrusted same-bay input
  • Brand:

    ICS TRIPLEX
  • Item NO.:

    TC-306-02
  • Goods Stock:

    1
  • Part Number:

    ICS Triplex
  • Weight:

    TC-306-02
  • Dimensions:

    Trusted Input Smart Slot Jumper Cable
  • Manufacture Year:

    Trusted Smart Slot Jumper Cables
  • Certification:

    Input-module Smart Slot jumper cable
  • Description:

    Same-bay Smart Slot connection
TC-306-02 configuration inquiry

Get a precise quote for TC-306-02

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

TC-306-02 official identification

Input-module Smart Slot jumper cable. Same-bay Smart Slot connection.

Installed roleInput-module Smart Slot jumper cable
Interface contextSame-bay Smart Slot connection
Exact-code controlUse TC-306-02 without suffix substitution.
Evidence basisOfficial manufacturer product documentation

Engineering and installation checks

  • Confirm TC-306-02 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

TC-306-02 key specifications

Cable Function Input-module Smart Slot jumper cable
Cable Length 2.5 m
Installation Scope Same-bay Smart Slot connection
Maintenance Role Bridges the failed primary-module position to the input module installed in the Smart Slot
Test Requirement The jumper cable must be tested before use
Module Scope Input modules; output Smart Slot applications use a different cable type

Source: Official manufacturer product documentation.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm TC-306-02 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
TC-306-02
Product family
Trusted Smart Slot Jumper Cables
Installed role
Input-module Smart Slot jumper cable
Interface boundary
Same-bay Smart Slot connection
Verification source
Official manufacturer product documentation
Final selection: match the complete TC-306-02 identity before order release.
Recommended model families

More ICS Triplex models

ICS Triplex TC-505-02-6M5ICS Triplex TC-505-02-6M5ICS Triplex TC-313-02ICS Triplex TC-312-02

Confirm the complete order code and installed-system context before replacement.

ICS Triplex TC-311-02ICS Triplex TC-311-02ICS Triplex TC-308-02ICS Triplex TC-303-02-4M0

Confirm the complete order code and installed-system context before replacement.

ICS Triplex TC-801-02-6M5ICS Triplex TC-801-02-6M5ICS Triplex TC-801-02-4M5ICS Triplex TC-501-02-6M5

Confirm the complete order code and installed-system context before replacement.

ICS Triplex TC-501-02-8M5ICS Triplex TC-501-02-8M5ICS Triplex TC-505-02-4M5ICS Triplex TC-215-02-8M5

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

GE IC695PSA140JGE IC695PSA140JHoneywell MEL-BSSRTSiemens 6AV6542-0DA10-0AX0

Confirm the complete order code and installed-system context before replacement.

Honeywell MEL-AV8CHoneywell MEL-AV8CSiemens 6AV6542-0AC15-2AX0GE IC695ACC402-AA

Confirm the complete order code and installed-system context before replacement.

GE IC695ALG600-CCGE IC695ALG600-CCGE IC695ALG608-CAHoneywell MEL-BSSRF

Confirm the complete order code and installed-system context before replacement.

GE IC695ALG626-CAGE IC695ALG626-CAGE IC695ALG704-CBHoneywell MEL-BSSRH

Confirm the complete order code and installed-system context before replacement.

GE IC695CHS016-EAGE IC695CHS016-EAGE IC695CMM002GE IC695CMM004-BF

Confirm the complete order code and installed-system context before replacement.

GE IC695CMU310-DMGE IC695CMU310-DMGE IC695CPE302GE IC695CPE305-AFBA

Confirm the complete order code and installed-system context before replacement.

GE IC695SPF002BGE IC695SPF002BGE IC695RMX228-ACABGE IC695PSD040M

Confirm the complete order code and installed-system context before replacement.

GE IC695PSD040GE IC695PSD040GE IC695PNS001-BCBDGE IC695PSA040K

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

TC-306-02 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order codeTC-306-02
2Capture the full nameplateSame-bay Smart Slot connection
3Record the installed contextSame-bay Smart Slot connection
4Verify interfaces and settingsSame-bay Smart Slot connection
5Plan commissioning checksSame-bay Smart Slot connection
6Request an exact-code quotationSame-bay Smart Slot connection

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for TC-306-02.

Company services

Exact-model checkReview TC-306-02, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

TC-306-02 FAQ

Why does input Smart Slot purpose matter when specifying TC-306-02?

Use the full TC-306-02 marking and the intended operating role to assess input Smart Slot purpose. The product context is Input-module Smart Slot jumper cable. Selection should be based on documented function, not appearance or a shared family name.

What installation checks are needed for 2.5 m same-bay constraint on TC-306-02?

Plan 2.5 m same-bay constraint around the approved location, mounting arrangement, isolation method, grounding and enclosure conditions. Inspect keying and connectors before the unit is secured.

How should engineers evaluate pre-use jumper testing for TC-306-02?

Review pre-use jumper testing together with the required task, host hardware and full TC-306-02 identity. The documented test requirement is The jumper cable must be tested before use. The application is suitable only when function and system context agree.

Which terminal and interface checks apply to primary-to-secondary bridge for TC-306-02?

Check primary-to-secondary bridge from end to end, including conductor identification, reference potential, shield termination and connected load. Correct any discrepancy before the circuit is energized.

What must be documented before changing connections related to input-versus-output cable selection on TC-306-02?

Document input-versus-output cable selection with clear terminal and connector references before disturbing the installation. The product context is Input-module Smart Slot jumper cable. Reconnect one identified point at a time and perform a continuity or point-to-point check where applicable.

What should the commissioning plan include for healthy-module return to primary slot on TC-306-02?

Prepare for healthy-module return to primary slot with the approved configuration loaded, connections checked and dependent equipment in a safe state. Verify diagnostics first, then test only the intended function.

How should wiring be checked for rear-connector access on TC-306-02?

For rear-connector access, compare the installed connection map with the exact TC-306-02 interface. Visual similarity is not enough; verify pin or terminal function before moving any wire.

Which site checks support correct dust-cap handling for TC-306-02?

Treat dust-cap handling as an installation checkpoint for position, mechanical fit, connector condition and cable access. Do not force the module or alter keying to make it fit.

What must be ready before commissioning TC-306-02 for module changeover sequence?

Carry out module changeover sequence during a controlled startup with the affected process or machine protected from unintended action. Confirm communication, diagnostics and the assigned function before normal operation.

How should signal continuity verification be verified before TC-306-02 returns to service?

Verify signal continuity verification with a controlled startup and a test of only the intended channel, signal, communication path or safety action. Confirm normal diagnostics and record the result before return to service.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ICS Triplex exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for TC-306-02.

Application areas

01Exact-code maintenanceInput-module Smart Slot jumper cable
02Installed-system replacementSame-bay Smart Slot connection
03Shutdown spare planningKeep TC-306-02 traceable through procurement and storage.
04Controlled receiving inspectionVerify label, connectors, condition and quantity before acceptance.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching TC-306-02?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp